Modern living has become highly sophisticated and a lot of pressing concerns can cause elevated stress and physical breakdown. Good thing water dispensers came into the consumer world to help alleviate the high demands on time and energy.
A wide array of under sink water chiller and hot water dispenser brands is available and each comes with a price tag that suits every budget. Exciting designs and features will surely dazzle even the most meticulous customer.
The following sections discuss two types of water dispensing machines that are great value for money. The first one is able to provide sparklingly chilled water as really delightful refreshment. The second one produces boiling hot water needed to make coffee, tea and other hot drinks.
Under Sink Water Chillers
These water dispensing machines eliminate the cost and hassle of spending precious time going to the supermarket whenever bottled water has run out. They are equipped with a technologically advanced in line filtration system that can adequately provide a consistent source of chilled and filtered water. The water tastes absolutely great and it does not have the odors oftentimes associated with a mains water supply.
The under sink or under counter water chillers are cost effective as well as environmentally friendly. They are directly connected to the mains water supply and the water passes through the in line filtration system. Organic chemicals and undesirable tastes and odors are effectively removed. The filtration process then yields crystal clear and fresh tasting water that is dispensed via the available tap of the machine.
There are other essential features that every consumer must watch out for. It is best that the dispensers are built of stainless steel for durability while the coating is ideally of scratch and impact resistant plastic.
The refrigeration system must be efficient and silent if possible. With a static condenser, the operation will be incredibly great, providing considerable energy savings.
The sealed ice bank of the cooling system must be ensured at all times. Doing so will retain the hygienic levels of the dispensed water. There will then be a continual supply of ice cold water that is free from bacteria obtained from external sources. Also, the need for regular sanitization is reduced.
The maintenance of the units is very easy and economical for the filter change and sanitization are done once every 6 months. The product supplier has replacement filters and sanitization kits readily available to prevent any hitch in the use of the machine.
The most important thing to consider is that the dispensers bear the CE mark to ascertain that they have passed the European standards for product safety and usability.
Hot Water Dispensers
These appliances dispense water at near boiling point or at about 94 degrees Centigrade. They are commonly known as boiling water taps. They are available in two models such as hot only, and hot and cold water types. They are kettle like product items that boil and dispense single mugful of water.
They normally have variable settings in the quantity of water being dispensed. A few seconds is all it takes to dispense water via the hot water dispensers. This means potential energy saving benefits can be acquired because only the necessary amount of water is boiled.
The other types of hot water dispensing machines include boil on demand heaters, tank dispensers and thermo pot water dispensers. The boil on demand types of heaters is small, portable and cheap. It does not need installation and is an energy saver.
The hot water tank type of dispensers needs to be plumbed directly to the water supply. The water is then heated and dispensed via the faucet. It has a built in filter and thermostat.
The thermo pot type of hot water dispensers combines the features of an electric kettle and a hot water flask. It is potable and requires no installation.
Water dispensers have innovative designs and awesome features to choose from. Remarkably, they possess both beauty and functionally that make modern life less stressful.
There is a choice between countertop and under sink water chiller models, depending on individual preferences. Also, various hot water dispenser brands are also being offered and they serve as great alternatives for the traditional way of boiling water using a kettle.
Triwin Watertec, a Taiwan-based water dispenser supplier, is committed to design, manufacture and export high quality POU water dispensers/coolers since our establishment in 1984. If you are interested in learning more information about water dispensers, welcome to contact with Triwin Watertec.
Article Source: http://EzineArticles.com/7194541