Daily Archives: October 14, 2016

How Do I Choose the Best Lathe Tooling Holder?

Posted on by

When you are attempting to choose the best lathe tooling holder for any lathe, you must identify the type of lathe tools or bits that you want to use with the holder. The typical lathe tool holder is designed to fit a certain-sized tool or bit, so if you wish to find a holder to work with tools already in your possession, you will need to match the holder with the shank size of your tools. The type of dial and adjustment or feed regulator of the tool holder is also an area to be considered. The typical metal lathe is used to manufacture parts and tools that must adhere to critical measurements. You will typically want to choose a lathe tool holder that offers you the most precise and exacting adjustment and tool control.

 

The most common design for a metal lathe tool is for it to be attached onto the end of a piece of square steel stock. The square shank is placed inside of the clamping component of the lathe tool holder. Depending on the size of the lathe, the tool shank and the holder, the best lathe tooling holders could conceivably be found in several different sizes. You will want to match the holder to the size tools that you will want to use with your lathe. Smaller tools are less expensive as a rule, however, the smaller the tool, the less strength it typically has.

 

Once you have decided on the size of the tool that the lathe tool holder will be used with, the next critical decision will be to choose the type of control or adjustment dial that your new holder will incorporate. As a rule, the more finite and slow-moving the lathe tool holder adjuster is designed with, the more accurate and precise the adjuster. Similar to a micrometer, the very slow-moving adjustment mechanism allows for much more precision when making adjustments.

 

The better tooling holders will also have more adjustments designed into the tool holder. Less expensive and lower-quality holders will usually have only an in-and-out and back-and-forth adjustment available to the user. The best lathe tool holder designs, however, will also incorporate an up-and-down adjustment. This adjustment will allow the user to make cuts slightly off of center for a new dynamic when turning steel. It is also common for the best designed lathe tool holder to allow the user to place the tool holder in both a left side as well as a right side tool feed position.

 

CYCLEMATIC is a professional tooling holder and CNC lathes manufacturer in the industry. Welcome to visit our website to find more details about tool holder and what you are interested. Feel free to send inquiry or contact Cyclematic Machinery.

 

Article Source: http://www.wisegeek.com/how-do-i-choose-the-best-lathe-tool-holder.htm

 

Professional Plastic Shredder Machine Manufacturer – KOWIN

Posted on by

Established in 1980, KOWIN continuously dedicates to the research & development and marketing of various types of plastic recycling machinery for a long period—providing high efficiency recycling machinery and helping customers recycle plastic waste and reproduce into final products—a professional plastic waste recycling and reproducing machinery turn-key plant manufacturer.

 

In here, we are going to introduce KOWIN’s plastic shredder machine below:

Plastic Shredder Machine

Exclusively World-wide invention patented.

Low Horse Power. Low Noise. German Quality.

Patented design special type blade.

Meet the international industrial safety requirements.

 

Advantages

 

  • This plastic shredder machine has been released through years of research and development. Low horsepower, low speed, it can save 50% power at least. Low noise. Special blade design, whose shredder blade life is three times longer than the general shredder in the market.
  • Electricity cost: save more than USD 7,200 / year.
  • Blade cost: save more than USD 11,000 / year.
  • KOWIN shredder has made multi-country patent, counterfeits will be prosecuted.
  • Welcome to KOWIN for test run. International OEM required is welcome too.

 

Technology & Feature

 

  • PET bottle breaking: Able to do shredding & label removing. To reduce the big space requirement due to batch process by large trommel, and reduce more than 50 % powder produced.
  • Pallet breaking: Directly shredding & crushing. Reduce the cost of crushing process.
  • Large drum breaking: Directly shredding & crushing. Reduce the cost of crushing process.
  • Wood breaking: Blade life is 3 times longer than general shredder.
  • Tire breaking: Blade life is 3 times longer than a general shredder.
  • Various kind of electronic products breaking: With slowly speed crushing, it reduces blade wear and unnecessary powders. Because there are too many small metals attached with electronic products; with blades of precision alignment and angle arrangement, it reduces the problem on metal damaging the blades.

 

When these components which are crushed and recycled by plastic shredders are reduced to manageable sizes, these materials can be reused in other manufacturing processes. This becomes part of the progressive reclamation process with recycling.

 

Today, almost all plastic scraps, products or components can be turned into another form of valuable commodity using plastic shredders. If you are interested and need further details about plastic shredder machine, welcome to visit KOWIN’s website and feel free to send inquiries to us.