Monthly Archives: November 2016

Investing In 5 Axis CNC Machining Center

Posted on by

Is It Really Worthwhile Investing In 5 Axis CNC Machining?

 

It wasn’t too long ago when metal fabricators and manufacturers were wondering why they should switch to CNC machining from the manual mills that they were already using. Today, when it comes to investing in 5 axis machining center technologies, the situation is quite similar. Many have been left behind simply due to the fact that they did not switch to CNC soon enough. When it comes to competing effectively and staying a top, it is a must for businesses to invest in the latest technologies.

 

The term “5-axis” machining may often confuse some people not familiar with this concept. Many manufacturers and shopkeepers think that they do not have the work load that would require the use of this type of process. Considering the fact that 5-sided machining can be facilitated with 5 axis machining centers, there is plenty of ways in which using a 5-axis CNC machine can prove to be beneficial. This means that even if there is no simultaneous 5-axis work, more profits can be earned if parts currently being produced using 3-axis machines are produced on a 5 axis machining center through 5-sided machining.

 

Why Is 5-Axis CNC Machining A Better Choice?

 

With 3-axis machines, multiple setups are required for each side of the part, setup time increases and accuracy decreases. On the other hand, when it comes to 5-axis CNC machining, setup time for the production of parts is reduced, accuracy is increased, and shop capability is also expanded for future work.

 

Is Simultaneous 5-Axis CNC Machining Is Even Better?

 

Yes, Simultaneous 5-axis CNC machining has its pros as well as its cons, but it is somewhat in certain aspects. For instance, if 5-sided machining never fails to impress, simultaneous 5-axis machining happens to be much faster. If a part can really be created with 5-sided machining rather than simultaneous 5-axis machining, then there is no harm in using it. However, both have their own pros. The benefits of 5-sided machining include the fact that it cuts fast enough, it can be programmed easily, its roughing strategy is remarkable, and generally, there are barely any issues involving tool interference. Similarly, what makes simultaneous 5-axis CNC machining beneficial is that the surface finish tends to be much better, the tool is enabled to reach difficult places seamlessly, and the tool life tends to be longer.

 

Mold Work

 

One example where you should definitely consider the use of a simultaneous 5 axis CNC machining center would be mold work, based on the mold. There tends to be limitations if 3-axis machining is used to manufacture the mold, especially when it comes to core molds that tend to be taller or the deep cavity molds.

 

Although a 3-axis CNC machining center can be used for mold work, if the work involves a deep-cavity mold, it becomes essentially to use long and skinny tools. While using these long and skinny tools, the feed rates have to be slowed down so that chatter is minimized and tool breakage is prevented. Often, the quality required quality of surface finish can be achieved when 3-axis machining is used for mold work. For fine finishing operations, particularly when it comes to small molds with a small diameter, the process can become more difficult than necessary if 3-axis machining is used.

 

When it comes to simultaneous 5-axis CNC machining, shorter and stouter tools can be used, as a result of which pushing faster with greater feed rates becomes possible. If simultaneous 5-axis machining is used for mold work, then heavier cuts can be taken and z-depths do not turn out to become a problem. As a result of all of this, the time frame in using the machine is also drastically reduced.

 

If you need further details about 5 Axis Machining Centers, welcome to visit the website of CNC-TAKANG where provides various machining centers and lathes. Do not hesitate to contact us for more information!

 

 

Article Source: http://EzineArticles.com/8443120

 

13 Different Types of Milling Cutters for Your Milling Machine’s Cutting Tool

Posted on by

There are 13 different kinds of milling cutters used in various milling machines. They each cut materials differently. They are: end mill, roughing end mill, slab mill, face mill, hollow mill, slot drill, ball nose cutter, side-and-face cutter, involute gear cutter, fly cutter, woodruff cutter, dovetail cutter, and hob.

 

Milling cutters are essential cutting tools needed in a milling machine. Different types of milling cutters are available in many sizes and shapes to efficiently perform any type of cutting work. Now, simply introduce different types of milling cutters below:

 

  1. End Mill

This is a tool with cutting teeth on one end and on its sides. Made of a high speed steel (HSS), the end mill cutter is the most common tool used in a vertical milling machine.

 

  1. Roughing End Mill

A roughing end mill removes a huge chunk of material in a wavy cutting pattern. This cutting mill produces a rough surface finish and is also known as ripping cutters. The wavy teeth minimize the vibrations and chatter sounds that occur during the cutting process.

 

  1. Slab Mill

A cylindrical cutting tool that can be used individually or with other cutting tools for cutting horizontal surfaces, the slab mill is made from a HSS.

 

  1. Face Mill

Face mill cutter is capable of holding multiple tip inserts. This economical type of cutting tool has tips that are can be replaced when they become blunt. A face mill can perform various cutting actions due to the versatility of the inserts and tips that it can work with.

 

  1. Hollow Mill

A hollow milling cutter is a pipe shaped tool with thick walls. The cutting teeth, however, are on the inside surface area. This cutting tool is essentially used in finishing cylindrical protrusions.

 

  1. Slot Drill

A slot drill is a cutting tool that directly cuts straight into a material. It commonly has two or more fluted cutters and a singular tooth located at the center of the end face. Slot drills are generally used for making cuts in a keyway slot.

 

  1. Ball Nose Cutter

The ball nose cutter is a hemispherical end cutter with a similar function to that of a slot drill. This is an ideal cutting tool for machines that shapes three dimensional contouring forms and shapes. Ball nose cutters are also commonly called ball mills.

 

  1. Side-and-face Cutter

The cutting of a side-and-face cutter is located on its circumference and side portion. They are available in different widths and diameters. The side teeth functions to cut only one side of the material.

 

  1. Involute Gear Cutter

The twelve teeth cutting gear comes in eight cutter sizes. A circular cutting tool, it has cutting edges on its circumference.

 

  1. Fly Cutter

A fly cutter is an inexpensive tool that functions like a face mill. It is composed of one or two tool bits that rotate to remove shallow and facing cuts.

 

  1. Woodruff Cutter

Woodruff cutters are small tip cutters that are used in cutting keyways. It is an essential tool in key engineering.

 

  1. Dovetail Cutter

Dovetail cutters are cutting tools that produce a dovetail slot patterns.

 

  1. Hob

Hobs are cutters used in a hobbing machine. These cutters are used to make gears and provide the appropriate shape specification of each workpiece. It is also important to consider the least cost and the correct cutting specifications of a cutting work when choosing a milling cutter. Remember to always work safely with the every cutting tool.

 

Whether you understand basic knowledge about milling cutters after reading these simple introductions? If you are interested in or need further information about milling cutter series, welcome to visit the website of Shin-Yain – Taiwan professional milling cutter, tool holder, and collet chuck manufacturer.

 

Article Source: http://EzineArticles.com/expert/Patricia_Strasser/499064

Article Source: http://EzineArticles.com/4350696

 

Guiding Public to Safety with LED Warning Lights

Posted on by

Having multifunctional warning lights can really make a difference to security personnel trying to control the situation and for public near the emergency zones. Emergency lighting can help the security personnel in many ways to direct the public, keep themselves safe and work on the emergency situation. The use of LED bulbs has made it possible for the LED warning lights to last longer without having the risk of burning out, or draining the batteries. They are also available in a number of colors, which works well in communicating the emergency situation to public.

 

The most common combination of LED warning lights that we see every day is the blue and red on cop cars. Apart from these colors, there are green, yellow, white and amber colors that are used in emergency vehicles like fire trucks, ambulances, construction vehicles and towing trucks. Emergency vehicles are not the only ones that have the need for warning lights. The personal vehicles that belong to emergency response team volunteers also need to be equipped with emergency lighting when they are responding to emergency situations. They are not allowed to have permanent fixtures of warning lights on their cars, but they can carry the lights and fix them when they have to navigate through heavy traffic zones, to the emergency zones. Green lights are used to request the right of way when navigating through heavy traffic zones, while red and other colors demand the right of way and are used by high-profile emergency vehicles.

 

Warning lights have strict regulations regarding the use of them in public because LED lights emit high intensity light beams which can have adverse effective on people with sensitive vision. Use of certain colors too varies from country to country and state to state in USA. Having LED warning light that can be stored is a great idea, since it gives the freedom to the security personnel to use depending upon the need of the hour. More sophisticated options like full-sized light bars are also of great use when it comes to dealing with the heavy traffic in emergency areas. Light bars come with in-built traffic advisers, which can have different shapes like arrows in discernible flashing patterns. They can direct the traffic in definite diversions that can suit the emergency situation, and help the emergency response teams to work better without confusion. Light bars need to be permanently fixed onto the roofs of the vehicles, but they are suitable for unmarked vehicles as well. Unmarked vehicles can have them mounted on the grill which is hidden under the roof of the vehicle. When in need grill rises to the surface and emergency lights can be used.

 

LED warning lights are available in the form of dash lights and deck lights as well. Dash lights can be mounted on the rear and front of the vehicles, which increases the visibility in the emergency zone. Dash lights and deck lights can also be used as hand-held lights when the security personnel need to survey the emergency zone on foot. They are worthy additions to every emergency vehicle, to help them be safe in roads and to guide the public to safety.

 

Ching Mars Corp. is a professional manufacturer and supplier in LED warning light from Taiwan. Nowadays, LED lights are becoming popular for several applications. We focused on manufacturing all kinds of LED warning lights to be placed on the outside of the vehicles.

 

Various LED warning lights of Ching Mars equipped for emergency situations, such as amber strobe warning light, LED warning light bar, LED traffic baton and more. If you are interested in need further details about LED warning light series, welcome to visit our website and feel free to contact Ching Mars!

 

Article Source: http://EzineArticles.com/expert/Sunil_Punjabi/235171

Article Source: http://EzineArticles.com/6485032

 

How to Choose the Right Bicycle Saddles for Riders

Posted on by

Finding the right bicycle saddle is crucial since this greatly affects the rider’s comfort and performance in their ride. Picking the right saddle is actually challenging for all riders regardless of their weight and size. For heavy riders however, the additional weight and pressure put on the seat may cause discomfort and strain. Here are a few things heavy riders may want to consider in choosing a saddle for cycling comfort.

 

Consider the width of the saddle. The idea of the saddle is to support the two “sit bones” to keep the rider balanced on the bike. Heavy riders may want to consider choosing a slightly wider saddle for better support and comfort on their backside but not too wide as this may cause chaffing or rubbing.

 

Consider the bicycle saddle pad. It is a misconception that the best saddle pads are those that are soft and thick. While these types of pads can be comfortable in the beginning, these can cause excessive heat as these absorb much pressure from the rider’s weight and movement and thus create discomfort during the ride. Experts suggest that heavy riders get a saddle seat with firmer foam since this doesn’t quickly compact compared to a foam or gel cushion. Also, experienced heavy riders agree that it is wise to choose bicycle saddles with the least cushioning but still is comfortable for the rider to sit on. It may take some time to get used to riding a firm saddle but over time, the ride would be more pleasant.

 

Consider durability. Because foam saddles easily wear out for heavy riders, these have to be replaced more often than a lighter cyclist would. Experts suggest that leather saddles can be a great option for heavy riders since these are more durable. Also, the longer the rider stays on the saddle; the seat becomes molded to the rider’s anatomy.

 

Shop wisely. It is advisable that a rider give the bike a test ride before buying it. During the test ride, the rider may vary positions on the saddle, ride on different speeds, hit some bumps and try some uphill terrain. This way, the rider can test the comfort of the saddle seat and the sturdiness of the saddle seat. Also, it is suggested that the rider also inspect the rails of the saddle. Although chromoly is the most affordable and suitable for most riders, titanium rails are more durable and long-lasting.

 

Considering all the factors, the key to finding the right bicycle saddles is optimum support and comfort for the rider.

 

BEV was established in1992 and is one of the bicycle industry’s leading component manufacturers. We are proud to offer the finest quality bicycle saddles, frames, forks, handle bars, bar ends and much more to customers and OEM producers around the world. If you are interested in and need further details about bicycle parts, welcome to visit our website and feel free to contact BEV now!

 

Article Source: http://EzineArticles.com/expert/Joan_Bishop_Denizot/2223664

Article Source: http://EzineArticles.com/9364794

 

Used Spot Welders Cost-Effective and Economical

Posted on by

Resistance welding is commonly used for joining steel sheets. These machines have evolved over the years. There is no metal filler needed, and the heat for the weld pool is created by means of resistance when a high welding current is directed through the welded work pieces. This technique is a highly efficient production method that is particularly well-suited for automated mass production and production lines.

 

Resistance welding is ideal for small batch production because this method is flexible, the equipment used is simple and the process is easy to control. Though these machines are highly priced they help provide quality welds, every time and at the required production rate. Seek the advice from the experts as they suggest the most cost effective and economical spot welders. Spot welding is one form of resistance welding. Spot welding focuses on specific points to weld and not on connecting the entire metal object. This technology allows you to perform repairs on previously welded objects.

 

Spot Welder is used in contacting metal surfaces welded by the heat from resistance to the electricity flow. Sheets having thickness of 0.5-3.0 mm are joined using this process. Determining the appropriate welding parameters is a very complex issue. A small change in one parameter has a major effect on other parameters as well. The contact surface of the electrode is gradually increasing making it difficult to design a welding parameter table. The table displays optimum parameters for different circumstances.

 

This kind of equipment takes care of almost all welding safety requirements for various industries and is also easy to install. Few industries where this equipment is used are heavy machinery and water equipment. Different metals of various thicknesses require different current amplitudes, time intervals and types of electrodes. For instance, if the equipment is not properly installed it could end up delivering too much or too little energy to the sheets being bonded. If too much of energy is delivered the sheets would melt excessively, which creates a whole in them rather than a weld. However, if the amount of energy is too little that will be insufficient to melt the metals and bond them.

 

Jiu Tai is an experienced and professional Spot Welder manufacturer, providing various welding machines which can be design to requirement and pre-made in-house under rigorous QC. We believe that Jiu Tai can always keep the highest level and high quality spot welders to provide for customers. If you are interested in welding machine series, welcome to visit our website and feel free to contact Jiu Tai.

 

Article Source: http://EzineArticles.com/expert/Esa_Devan/1513261

Article Source: http://EzineArticles.com/7715824

How to Use a Tree Pruning Saw

Posted on by

Once you’ve decided you need to make a pruning cut and know that the wood is too thick for the otherwise-preferable use of hand pruners or loppers, it’s time to get out your tree pruning saw. Pruning saws are your choice for wood about 1.5 inches thick or more and your last resort before the very large stuff that you might only be able to do with a chainsaw. As such, they are used to cut a wide range on the large end of wood thicknesses.

 

Since saws are used on thick, often long wood, their use often comes with more cautions and considerations than pruners and loppers, which are basically strong and specialized scissors. Saws can require significantly more strength and control.

 

This guide covers tips and cautions for the use of saws in pruning you can reach from ground level.

 

Pruning with A Saw, General Technique

 

Wear sturdy work gloves and possibly safety goggles if you’re in a dense shrub.

 

Choose the exact spot to cut and a healthy cutting angle. As you prune, it may help to consider these steps:

 

  1. Notice nearby wood you want to preserve. Often you will be working in tight-angled crotches or near other branches you do not want to cut. More than any other pruning tool, saws easily slip and can quickly injure wood unintentionally, so note this risk in your mind.

 

  1. Choose a comfortable direction of cut. When possible, choose to cut from a top side to a lower side, so gravity is pulling the saw into the wood. By changing where you stand relative to the plant and the angle of your saw, you can usually make the same cut in many different ways to suit your access and comfort.

 

  1. Reduce limb weight with preliminary cuts. This step is crucial and not anticipated by many gardeners. Thick or long branches have significant weight that will cause a premature break and tear before you can complete a saw cut. This is because your saw cut will reduce the wood holding the limb to a weak, narrow strip. To prevent a tearing wound to the plant, you must tactically remove this weight before even starting your last cut at your chosen spot.

 

  1. Begin your final cut with a starting groove. Without this groove, tree pruning saws will want to slip away from your site. Slipping is especially a risk on non-horizontal branches.

 

  1. Begin to cut. Working in the groove to guide your strokes, you can cut at a brisk speed now, straight back and forth, keeping in enough control to not slip and wound nearby wood or yourself. Cutting happens on the pull stroke, so bite into the wood on pulling and push back lightly.

 

  1. Finish the cut. Saw until the branch comes cleanly away from the plant. Occasionally some rough wood will be left at the bottom of your cut, like a splinter beard. To achieve that perfect, baby-smooth cut, you can shave this off with a light stroke of your blade pressed flat against the pruning wound.

 

Chan Long is a professional hand saw manufacturer in the industry. We provide various saws such as tree pruning saw, folding saw, pull saw, woodworking saw and so on products. If you need more information about handy saw series, welcome to visit our website and feel free to contact Chan Long!

 

Article Source: http://treesandshrubs.about.com/od/pruning/a/How-to-Use-A-Pruning-Saw.htm

 

Comparison between Automotive Oil and Motorcycle Oil

Posted on by

Oil is quite essential for the smooth functioning of engines in both motorbikes and automobiles. However, there are different types of oils which have different types of viscosities and it should be chosen accordingly. In the past, engine oils used in cars and motorcycles varied hugely due to various factors. Nowadays, both cars and motorcycles are manufactured with revving engines that can use automotive oil without any bad effects.

 

Motorcycle oil VS Automotive Oil

 

Although both these can be used in bikes, the engines of both cars and motorbikes function are different and their require oils are specifically formulated. Compared to the car engine and bike oils are expensive. Most of the motorcycles include some important factors which enable better performance and durability of the motorcycles. Car oil is quite inexpensive compared to bike. Some of the major differences between these two types are elaborated below.

 

Viscosity:

Compared to the automotive and bike is thinner even though both these oils are classified under the same viscosity. This is made thinner so that it provides better and easier lubrication for small internal parts in the motorbikes.

 

Price:

It is quite expensive compared to car oil as it is highly refined. Bike oil is thoroughly refined so that it provides better lubrication and passes easily through small internal components in the vehicle. As it requires an extended refining process, it is quite expensive than the standard types of engine oil. However, it is important to purchase motorbike engine oil for vehicles as it guarantees better performance and higher durability of the engines.

 

Reduction of heat:

In comparison to the automotive oil, this oil is designed to reduce the amount of heat generated in the internal parts of the engine. Moreover, heat is generated in focal points in these engines compared to car engines.

 

Specifically formulated oil:

As compared to cars, bikes require specifically formulated one as oil breaks down faster in bikes due to the continuous meshing of gears. So all the motorbike engine oils are designed and formulated specifically for bikes.

 

Different additives:

Automotive do not contain additives which are present in motorbike engine oils. Various types of additives such as PTFE or Teflon are included in these to reduce excessive heat and friction. This is coated onto the gears of the vehicle.

 

Friction:

The engine oils used in bikes helps to reduce friction and thereby prevents clutch slippage. It can therefore be used effectively in vehicles with oil-wet clutches. But car engine seldom can be used to reduce slippage or friction.

 

However, when exposed to extreme pressure and heat, both these types of engine oil breaks down which further causes thinning of the oil. It then fails to lubricate the engines effectively.

 

Today with technological developments in various fields, different types of engine oils are made available quite easily in most of the online stores. Synthetic oil is another type of automotive oil used in most of the vehicles today.

 

Min Jung Hong is a professional manufacturer of specializing in motorbike engine oil and various high performance motor oils. If you are interested in and need further information, welcome to visit our website and feel free to contact us!

 

Article Source: http://EzineArticles.com/expert/Anamika_Swami/720304

Article Source: http://EzineArticles.com/7127103

 

Video Wall Software Improving Content Management

Posted on by

Let’s face it: today’s technology is miles ahead of the technology from even ten years ago, and it’s improving at an exponential rate. Standard definition is hardly standard anymore; now 1080p high definition is the norm for most types of screens. And the new high definition – 4K Ultra HD – is a full four times sharper than regular HD!

 

With flatter, thinner screens that support ever higher resolutions, it’s clear that our hardware has surpassed our expectations and given us the possibility for the absolute top-of-the-line screen quality when it comes to audio/visual solutions. So what’s left? Where do we go from here, and how can we possibly improve upon what we already have?

 

The answer, which many overlook, is content. Sure, we may have the means to display amazing images and videos on super-sharp screens, but we also need the right content to actually put on those screens, and an easy way of doing so.

 

That’s why video wall software has become just as important as the actual hardware. Video wall installations are ideal for a wide variety of environments, from retail to education to entertainment, but often the content management systems can be complicated and time-consuming.

 

With the right video wall software, you should be able to manage your content with ease. That’s the next step in technological innovation: not just improving the hardware, but improving the ways that we add and manage content. We’re moving towards a world where content is king, and management that is both intuitive and user friendly is the name of the game.

 

Software also adds a level of customization that allows you to really make the content reflective of your identity or brand. Customization is increasingly important in today’s world where we are constantly inundated with information that can seem generic. With software that lets you customize your content, you can create something that is completely unique to you and your company. This is perfect for when you want to stand out in advertising or create dynamic presentations to showcase your business.

 

The right video wall software allows users to program and schedule content so that it will play at specific times-perfect for planning ahead. There are usually plenty of configurations available as well, like picture in picture. Software is also useful when you want to use a combination of different media sources, such as CD/DVD players, cameras, the internet, and more.

 

The future of AV technology is content management, so instead of just thinking about the right hardware, consider also a system that comes with integrated and intuitive software.

 

Eagovision is an excellent and professional video wall solution and software provider in the industry. Our Pro Video Wall Solution is a “Digital Signage Software” with complete Hardware that allows users to create unique Video Walls and amazing effects for their own Video Wall Displays.

 

Welcome to visit our website to gain more insight what our video wall software can do. If you have question or need technical support, please feel free to contact EAGOVISION.

 

Article Source: http://EzineArticles.com/expert/Jake_K/2157293

Article Source: http://EzineArticles.com/9140002

Overview of Camlock Couplings and How to Buy

Posted on by

The camlock couplings are fitting types used in connecting hoses and pipes mostly in industries during the transfer of liquid and dry products. They are also commonly referred to as groove couplings or cam couplings. The fitting are quite helpful in industries since they make the transfers safe and efficient without any damage risks. The couplings are made using different materials including stainless steel, polypropylene, aluminum and brass. They are all strong materials resistant to corrosion, making them perfect for the function.

 

Camlock couplings are also used in tanks, totes, trucks and containers and they come with a female coupler and groove. The cam grooves are easy to use since you only need to insert the male to the female by means of a simple lock. They offer sealed connection, making them ideal in the transfer of hazardous materials such as chemicals. You don’t have to worry about leakages when using this type of coupler since they create an airtight connection. The cam couplings come in different sizes and you can therefore find the right ones for the kind of connections you are looking for.

 

Groove couplings are used in industries dealing with corrosive and flammable materials, food industries requiring hygiene standards, cleaning service companies, paint factories, fire departments and in the agricultural sector among many other settings where safe product transfer is required.

 

Types and How to Buy

 

Brass couplings are most suitable for high temperatures, but the aluminum couplings offer better strength and structure. If you are looking for durability, you will find the stainless steel couplings best for you. They are non-corrosive and will serve your needs for a long time without requiring any replacements. It is advisable to consider the needs you have before choosing the couplings. This helps you make the right choice in terms of the functionality, durability and also affordability.

 

When buying camlock couplings, ensure that you get your fittings from reputable distributors. Luckily, there are plenty of reputable manufacturers as well as dealers you can purchase your fitting from and be assured of the quality that you get. When purchasing from such manufacturers, you can be sure of the standards and safety as well as efficiency of your couplings. Safety is of utmost importance hence the need to always ensure that you settle only for high quality couplings.

 

You can buy your fittings online with ease and you should take into consideration the material of the couplings as well as the size before buying. The online sites will have a clear list of available camlock couplings some complete with images to make your shopping easy and fast.

 

Camlock couplings are without a doubt very important and functional in so many settings. Always settle for quality when making your purchase and buy only from reputable Camlock Lock manufacturers.

 

Golden Highope as the professional stainless steel threaded pipe fittings and camlock couplings manufacturer, providing series of threaded pipe fitting including 45 deg elbow, 90 deg elbow, cross fittings, round cap fittings, sockets and coupler series.

 

We insist to provide only high quality products with competitive prices, we believe that Golden Highope is your best choice of camlock couplings manufacturer. If you need more details and specifications, welcome to visit our website and feel free to send inquiries to Golden Highope!

 

Article Source: http://EzineArticles.com/expert/Jovia_D’Souza/2007086

Article Source: http://EzineArticles.com/8926451

 

Turning Center Series Manufacturer and Supplier – Chevalier

Posted on by

Established in 1978, Chevalier provides CNC Turning Center in Industrial Manufacturing and Metalworking Equipment. Our Turning Machine Company exclusive range also includes Vertical Turning Centers and Multi-Function Flat Turning Lathe. Chevalier is highly respected by our clients as a result of our turning centers’ incomparable features like robust construction and corrosion resistance.

 

Now, having a simple introduction about one of Chevalier turning centers below:

 

Vertical Turning Centers (VTL series)

FVL-1250VTC-C Vertical Turning Center

Model:

FVL-1250 / 1600 / 2000VTC, FVL-1250 / 1600 / 2000VTC+C, FVL-1600VTC+CY

 

Features:

  • A patented coupling type clamping system along with 8 hydraulic locking pins keep the tool in place during heavy stock removal.

 

  • When in use, the turning tool holder a 0.5mm space between spindle taper and tool taper, eliminating load stress on ram spindle bearings and substantially prolonging spindle life.

 

  • High rigidity NN bearings, 20HP high torque spindle motor and 2500rpm spindle speed combine to deliver heavy duty performance for milling, drilling, tapping and grinding applications.(ZF gearbox is offered as an option.)

 

  • Programmable ±100mm Y axis design is ideally suited for slot milling and multi-task machining applications.

 

  • The rotary table is driven by powerful spindle motor with ZF gearbox, for low speed machining with high torque or high speed machining for fine finishing.

 

Make you want to get further details and specification about turning centers? Do not hesitate to visit our website where showing various turning, milling, and grinding machines. Welcome to contact Chevalier if you have any questions!