Monthly Archives: December 2017

Do You Know What Liquid Crystal Polymer Is?

Posted on by

Liquid Crystal Polymer (LCP) – A relatively unique class of partially crystalline aromatic polyesters based on p-hydroxybenzoic acid and related monomers. Liquid crystal polymers are capable of forming regions of highly ordered structure while in the liquid phase. However, the degree of order is somewhat less than that of a regular solid crystal. Typically LCPs have outstanding mechanical properties at high temperatures, excellent chemical resistance, inherent flame retardancy and good weatherability. Liquid crystal polymers come in a variety of forms from sinterable high temperature to injection moldable compounds.

 

A number of liquid crystal polymers (LCPs) were produced in the 1970s which displayed order in the melt (liquid) phase analogous to that exhibited by non-polymeric liquid crystals. However, the commercial introduction of liquid crystal polymer resins did not occur until 1984, at that time liquid crystal polymers could not be injection molded. Today, liquid crystal polymers can be melt processed on conventional equipment at fast speeds with excellent replication of mold details and efficient use of regrind.

 

Characteristics of LCP

 

  • l Molecular chains align themselves when molded, and this generates a self-reinforcing effect, Thereby resulting in extremely high strength and elastic modulus.
  • Despite having a high elastic modulus, very much superior vibration absorbing characteristics are exhibited.
  • Linear expansion coefficient in the flow direction in particular is very small, exhibiting a value an order of magnitude less than conventional plastics and on a par with steel.
  • The thinner the product, the higher the proportion of the oriented surface layer, so greater strength and elastic modulus can be achieved the thinner the product.
  • Because of its microcrystalline structure, LCP possesses superior deflection temperature under load (180-26 0°), continuous usage temperature (200-24 00°C), and solder heat resistance (2600°C for over 10 s, 310 0°C for 10 s), despite its relatively low melting point.

 

Applications in LCP

 

  • Automotive industry: Automobile combustion system components, burning pumps, insulation components, precision components and electronic components, etc.
  • Electrical and Electronics: High-density connector, coil planes, bobbins, the substrate carrier, capacitors case, socket, surface-mount electronic components, electronic packaging materials, printed circuit boards, braking equipment and lighting equipment, etc.
  • Home-use Electric Appliances: Microwave oven kitchen containers and food containers, etc.
  • Mechanical industry: Distillation column filler, valves, pumps, oil well equipment, measurement equipment parts, seals and bearings, etc.
  • Medical industry: Surgical equipment, intubations, knives, sterilization trays, laparoscopy and dental materials, etc.

 

Manufacturer of LCP

 

For quality liquid crystal polymer LCP, Prochase Enterprise Co., Ltd. is one of the excellent choices of manufacturers for customers. If you need more information about LCP, try to check out Prochase’s website: www.prochase.com and let the company know your demands.

 

 

Article Source:

http://www.miltonplastics.com/index.php/Picture/show/9.html

https://plastics.ulprospector.com/generics/17/liquid-crystal-polymer-lcp

GSM Antennas and Their Uses

Posted on by

What Is A GSM Antenna?

An antenna is an electrical device which converts electrical currents into radio waves and vice versa. It is an essential part of a radio allowing a radio frequency (RF) signal generated by a radio device to be sent or received on a particular frequency or frequencies. A GSM antenna can operate on 824-894 MHz, 890-960MHz, 1710-1880MHz and 1850-1990MHz. Often, antennas can operate on more than one frequency range. In this case they are often referred to as dual band (2 frequencies), tri band (3 frequencies) or quad band (4 frequencies).

 

Why Do I Need An Antenna?

The GSM antenna receives or transmits the RF signal – without it the radio system will not work. Antennas are used in all systems using wireless equipment such as key fobs for cars, garage door entry systems, RFID tags, baby monitors and mobile phones.

 

How Does A GSM Antenna Work?

An antenna is made using a conductive strip or wire usually made of metal. This allows an electrical current to pass through which creates a magnetic current. Depending on the frequency, this will create a wavelength which is a certain size. The lower the frequency the longer the wavelength and this will make a GSM signal transmits further.

 

What Should I Look For In An Antenna?

Antennas come in different shapes and sizes and depend on how they are being used. Firstly however, they radiate in 2 ways. The first is the more common – OMNI directional antenna. This allows a 360° radiation pattern so as to transmit and receive in any direction in a circular pattern. Directional antennas transmit and receive RF signals in a limited direction and need to point in the general direction of the other radio.

 

As examples, an antenna on a walkie talkie would be OMNI directional, giving an all-round coverage. A TV antenna mounted on the roof of a house is a Yagi antenna which is directional – pointing in the direction of a TV transmitting power. This allows a concentration of signal to be sent or received.

 

How Many Types Of GSM Antennas Are There?

 

Once an OMNI directional or directional antenna has been determined, there are 6 generally accepted styles of GSM antenna. These depend on the use.

 

  • Embedded antennas are used for when the antenna is being fitted inside equipment.
  • Through hole mount antennas are used in permanent installations and fit via a mounting bolt.
  • Magnetic mount antennas are usually reserved for temporary installations or in evaluation kits.
  • Direct connect antennas screw directly to GSM modems or the back of GSM terminal equipment. External or base station mount GSM antennas often fit on walls and are used in remote locations
  • For wireless telemetry or alarm panel installations.
  • Adhesive mount antennas stick onto glass or other nonmetallic surfaces.

 

Where to Find Ideal GSM Antenna Manufacturer?

The manufacturer that I recommend to you is Evercom Communication Technology Co., Ltd...

 

Evercom is a leading supplier of mobile antennas company throughout the world. Established in 1993, it specializes in design and manufacture of WIFI, MIMO, GPS, UMTS, DVBT, UHF / VHF, GSM antenna, CB antenna mount, and accessories etc.

 

Evercom offers innovative design, quality manufacturing and reliable performance. If you need more information about GSM antenna or other antennas, try to visit the website of Evercom: www.evercomtech.com to obtain the details you need.

 

 

Article Source: http://EzineArticles.com/6838580

Sanitary Ball Valve Overview

Posted on by

The sanitary ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked.  The handle or lever will be in line with the port position letting you see the valve’s position. The ball valve along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

 

Using ball valves in sanitary applications has some pluses and minuses. Perhaps the greatest benefit of using sanitary ball valves is that they usually work to achieve perfect shutoff even after years of disuse. They are therefore an excellent choice for shutoff applications and are often preferred to sanitary butterfly valves, diaphragm valves or seat valves. They do not offer the fine control that may be necessary in throttling applications but are sometimes used for this purpose. The other big advantage ball valves have is that they are the highest pressure rated sanitary valves on the market.

 

Principles of Operation

 

Sanitary ball valves, as the name implies, have a ball with a hole drilled through the center swivel mounted with the valve body. When the hole in the ball is oriented in the same direction as the pipe, this will result in full flow rate. As the hole in the ball is oriented away from the direction of the pipe, the flow rate will be restricted and finally cut off completely when the hole is oriented 90 degrees to the pipe direction.

 

Automation

 

Like sanitary butterfly valves, most sanitary ball valves can be highly automated.  Ball valves are offered with stainless steel actuators for all sizes.  There are different switch packages available which to mount to the actuators. Double rack and pinion pneumatic actuators are the standard for ball valves, because they are ¼ turn valves.  Also the same as the butterfly valves, ball valves have a large offering of different ¼ turn actuators on the market.

 

Other Features and Benefits

 

Many different manufacturers offer their version of a ball valve although the operational features are very similar. In the market of ball valves there are many different alternative choices so that potential customers are easily able to find another choice. For this reason it is important to decipher a customer’s needs for the application at hand. This will make it possible to choose the one that will be a quality performer at a good price.

 

Like the butterfly valve, a ball valve is available in 316 as well as AL6XN and Titianium material. This type of construction material is not available with all manufacturers, as well as, it can be difficult to find MTRs and C of C’s to go along with the desired valve.  There are multiple handle styles that are offered with the ball valve as well, such as, pull stop with a locking mechanism and trigger handles. Ball valves have the luxury of coming with many different connection styles in order to be able to fit into a customized sanitation process line.

 

Are Sanitary Ball Valves Really Clean?

 

As we discussed with the butterfly valve. What is considered “sanitary” is relative to each end user. The fact that sanitary ball valves are constructed of 316 stainless steel, have FDA approved elastomers and have Tri-clamp or tube OD butt weld ends puts them in the sanitary realm. But you really cannot truly clean it in place. Ball valves have cavities and crevices behind the ball that gather product when the valve in being actuated. These areas do not get clean during CIP. To truly clean the valve, you have to take it apart.  Even with newer designs of ball valves having FDA approved cavity fillers to help limit product build up on the inside of the vale it is inevitable that product will still accumulate around the outside of the ball and orifices. Because of the sanitary ball valve do not carry the 3A rating.

 

TARGET VALVE is the professional valves manufacturer in Taiwan. You can find a variety of valve products on their website. Such as 1 pc ball valve, economic ball valves, flanged ball valves, multiway ball valves, and sanitary ball valves etc. Learn more details, welcome to check out their website and feel free to contact them directly.

 

 

Article Source: https://hollandaptblog.com/2014/01/17/1106/

How to Use a Finishing Nailer in Woodworking

Posted on by

A Quality Finish Nailer Can Speed Up the Assembly Process

Apach Finishing Nailer

Finishing nailers are designed to nail moldings and smaller trim boards onto assemblies with ease. The thin finish nails can be driven through the trim board into hardwoods, softwoods, plywood or other manufactured wood products such as MDF with a very small footprint, leaving behind a very small nail hole that can be filled using wood filler before or after applying the finish. The thin nail is also far less likely to split the delicate trim board than a larger framing or other types of nail or wood screw and typically holds much better than an adhesive.

 

The finish nailer is also much faster than nailing finish nails using a hammer, allowing the trim carpenter or woodworker to be far more productive. The finish nailer has the added advantage of being able to be used one-handed, freeing up the other hand for holding the trim or molding in place.

 

Features of a Finish Nailer

Most finish nailers use nails ranging from 15-18 gauges, and the style of nailer is either straight or angled (meaning that the magazine that holds the nails beneath the nailer is either perpendicular to the nailing direction or at an angle of about 20 degrees). Nails for these nailers come in strips of 50-100, usually in boxes of about 2000 in total, and usually, range from 1-1/4 to 2-1/2 inches in length. Smaller finish nailers, commonly called brad nailers, will shoot very thin brads ranging from 5/8-inch up to 1-1/2 inches in length.

 

Safety Features

Finish nailers have a safety nose that must be depressed before the trigger of the nailer will engage and be able to be pulled.

 

Most finish nailers include a rubber, anti-marring tip that can be slipped over the tip of the nose to prevent the nailer from damaging the wood or molding being nailed.

 

To use the finish nailer, position the tip of the nailer on the trim board at the location where you want the nail to be driven. Then, adjust the position of the nailer to drive the nail in the proper direction.

 

In most cases, the nailer’s cylinder and the tip should line up perpendicular to the face of the board, allowing the nail to be driven squarely into the board. In other cases, though, you may need to angle the nail to catch sufficient wood behind the trim or molding, so adjust your angle of the nailer accordingly.

 

Once the nailer is aligned properly, push the nailer gently toward the wood, depressing the safety nose of the nailer, and pull the trigger. A finish nail should be driven directly into the trim at the desired angle.

 

As with all power tools, be sure to wear appropriate safety equipment, including safety glasses, hearing protection where necessary and appropriate clothing.

 

Pneumatic or Cordless?

Finish nailers come in two styles, pneumatic and cordless. Pneumatic finish nailers are powered by compressed air via a hose from an air compressor. Conversely, cordless finish nailers utilize a combination of a rechargeable battery and a compressed air canister to drive the nail. Obviously, the cordless unit has the advantage of not being tethered via a hose, but because of the onboard battery, the cordless units tend to be a bit heavier.

 

Costs are also a concern for both types of nailers.

 

With a pneumatic nailer, you obviously need a decent air compressor and hoses to run the distance between the compressor and the area being nailed, so the initial costs are much higher than a cordless unit. On the other hand, with the cordless, you don’t have such a large up-front expense, but you do have some consumables, specifically the need to purchase more air canisters when the current canisters run out. If the required canister isn’t available at your local lumberyard or home center, you may need to order more online or else your cordless finish nailer will be unusable.

 

Dealing with Problems

When working with a finish nailer, you want the head of the finish nail to be sunk just below the surface of the trim board or molding so that it can easily be filled with nail filler. If the nails aren’t being fully sunk, you can drive them in using a hammer and a nail set, but that is extra work that you shouldn’t have to do.

 

The problem typically is caused by either insufficient pressure from the air compressor, or the depth adjustment dial on the finish nailer needs to be rotated until the nails are driven to the appropriate depth. Check the operating manual for your particular finish nailer model for instructions on how to modify the depth adjustment.

 

One other problem that occasionally arises is a jam in the head of the finish nailer. Nearly all finish nailers have an easy-to-open latch on the front of the nailer that can be opened and the jammed nail(s) removed. For safety, disconnect the nailer from the air compressor or take out the battery and/or air cartridge before opening the latch to remove a jam.

 

Apach Industrial Co., Ltd. is the well-known manufacturer and supplier of finishing nailer. Their air finish nailers are designed to accomplish carpentry finish work quickly and efficiently. Especially Apach new angled finish nailer can be used for bedding, cabinets, siding, upholstery and other applications. If you have any interest in finishing nailer and air finish nailers etc. products, try to send inquiry to Apach. They will offer you the best price and superior high quality.

 

 

Article Source: https://www.thespruce.com/how-to-use-a-finish-nailer-3536707

Pull Studs: Importance of Selection and Maintenance

Posted on by

Pull stud is the tension part between the principal spindle of the boring milling CNC machine tool and the tool holder. It is also called pull head, connecting pull head, thread pull head, tool holder pull head, tool holder pull stud, tool holder joint, fastening pull stud and tool holder tensioner, etc. Due to its small volume and low value, its importance in work is easily neglected by people. To better develop the role of the lathe, it is necessary to have a understanding about the pull stud and lathe tension mechanism.

 

Pull Stud Stand and Its Combination:

 

Pull Stud Is The Spare Part Fixed At The Tail End Of Various Tool Holders Through Thread.

 

The tension mechanism inside the principle spindle of the lathe tensions the tool holder in the principal spindle by use of it. The tensioning is maintained by replying on a group of springs. After tension is realized, the prolapse of tool holder and tool from the high-speed rotary principal shaft can be avoided sufficiently.

 

Pull stud is designed according to the standards of tool holder and related part of the lather. Due to the various standards for the tool holder, the lather tension mechanism also differs. Therefore, the united standards cannot be formed for the pull studs. Sometimes, the two ends of the pull studs live up to certain standard (like ANSI, DIN, ISO or JMTBA). However, sometimes, the mixture form (the thread part is adapted to the tool holder part of ISO standard while the pull stud head is also adapted to the lather of ANSI. In this case, such mixture combination can bring about a lot of different pull studs) also exist. In case of inappropriate selection of pull studs, the accident will be caused when using the tool holder after it is installed in the tool holder.

 

Selection of Pull Stud:

 

Facing Various Pull Studs, How to Find Out The Specification And Type You Need?

 

It is better to select the pull studs according to the instruction of the lather. The drawing or type of the pull stud will be given out in the instructions of lather by most lather manufacturer. Additionally, the determination can be made after measuring the pull studs for the lather. Most pull studs are of 10-12 dimensions. It is necessary to provide the details to the supplier in case of ordering. However, the attentions should be especially paid to main three parts: namely the angle of pull stud, the distance from the base level to this angle and the thread type. These three dimensions are easily measured. If a national lather (Actually, the taper hole of the principal spindle is British system dimension, it is just labeled by changing it into the metric unit) and a batch of tool holders of British system taper are bought for a workshop. As for the pull studs, the thread is labeled with America system (adapted to the tool holder), the metric system shall be used for other dimensions and adapted to tension mechanism of lathe.

 

If you are looking for pull studs manufacturer, Shin-Yain Industrial Co., Ltd. is a wonderful choice! This company is a well-known tool holders manufacturing expert in Taiwan. Shin-Yain can offer a variety of tool holders, collet chucks, pull studs, and shrink fits to you. More details, try to check out Shin-Yain’s website: www.syic.com to gain you need.

 

 

Article Source: http://lyxcsfx.com/case/xincheng-precision-selection-and-maintenance-of-pull-studs-c00005c1.html

Bike Frame Materials Explained

Posted on by

Impacting important characteristics such as ride quality and feel, a frame is often the defining feature of your favorite bike. So regardless of whether you’re getting stuck into a dream bike build, considering a new ride or are just a sucker for the technical detail, we’ve put together this handy guide to help you better understand the foundation of your bicycle.

 

Often referred to as the heart of a bike, a frame can be made from either carbon fiber, aluminum, titanium, steel or a combination of these materials. Each bicycle frame material offers a list of differing characteristics that will affect the cost, comfort, weight, stiffness, strength and durability.

 

It’s worth noting that it’s often how the chosen material is used by the engineers and manufacturers that matters most, and this is something that each brand will typically play with. Before we jump into the details, it’s worth considering the following factors when deciding what material is best for you;

 

  • Weight: Your bike needs to be strong enough to carry you and any extra luggage you plan on carrying in the form of panniers, racks or mounts. Each material will have different strength properties, fatigue rates and impact resistance but there is always a trade-off between weight and durability. Another aspect of weight to consider is how important having a lightweight bike is to you. For example, if you’re chasing performance advantages than having a light weight bike would be higher on your list.

 

  • The Purpose of The Bike: If you plan on racing then a stiff, lightweight bike is the ideal choice, narrowing the type of materials to choose from. Conversely, if you are touring or planning a riding adventure that requires long hours in the saddle and the ability to carry items, then durability is the priority and again, narrows the type of material to choose from.

 

  • The Area You Ride: It may not be apparent that your postcode could influence the type of material your bike is built from, but consider a material like steel that will rust in wet, humid climates. A material like aluminum might be a better choice given the conditions while still providing similar characteristics to steel.

 

  • How Long You Plan On Having The Bike: All materials will fatigue over time but some faster than others. Steel will rust if not taken care of but is more durable than aluminum over the long term. Carbon fiber and titanium frames have exceptionally high fatigue rates meaning they will last and last and last.

 

  • Your Budget: Budget is often the biggest factor in choosing a bike and consequently its material. As a generalization, in order of most expensive to least expensive, titanium takes the cake, followed by carbon fiber, aluminum and steel. As always, the tradeoff between what you are willing to spend for what outcome is the key consideration.

 

To help provide more clarity on the various bike frame materials available, we’ve summarized each material type, its properties, characteristics and more importantly how they translate into ride quality. But, today I only introduce the material part of steel. For more details about other materials, please click here: Bike Exchange

 

Steel

 

Ah steel, the no fuss workhorse of bike frame materials. Steel was the universal choice of racing bike frames until aluminum appeared in the 1970’s and 1980’s and carbon fiber took over in the 1990’s.

 

There are two distinct types of steel used in the bicycle industry. The first is high tensile, or otherwise known as ‘Hi-Ten’, this is a cheaper grade steel commonly found in cheaper bikes, especially those from department stores. It offers an incredibility poor strength-weight ratio and so manufacturers will typically use this material in order to hit low price points. By comparison, higher-end steel bikes are likely to use chromoly, or CroMo for short (generally short for chrome molybdenum) steel, which as an alloyed steel offers superior strength properties to Hi-Ten and so can be butted and made thinner/lighter.

 

Steel is inexpensive, exceptionally durable, highly resistant to fatigue, easily repaired and easy to work with. Unlike carbon fiber and aluminum, damage to a steel bicycle frame is typically easily repaired. Somewhat surprisingly despite its strength, steel offers good levels of compliance thanks to its elastic properties. The downside of steel is that it is prone to oxidization (rust) and carries a weight penalty over other materials.

 

Touring and adventure bikes are commonly made from steel thanks to the exceptional durability and strength on offer. This enables riders to carry large amounts of luggage without compromising the bikes performance. Steel also features heavily on entry level and recreational bikes where weight isn’t such an important factor.

 

  • Pros of Steel: Cost and ease to manufacture, strength, durability.

 

  • Cons of Steel: Weight, corrosion resistance.

 

How It’s Made

 

Joining steel tubes together involves similar welding processes to aluminum frames, but further options exist including ‘Brazing’ and the use of lugs. Brazing is similar to TIG welding but uses a ‘filler’ material that is melted and used to join the tubes. The filler material is commonly silver or brass but could be a myriad of other alloys too. Lugs act as connectors at junction points of the frame, creating a sleeve for the tubes to slide into. Prior to constructing the frame, the ends of the steel tubes are precisely cut to fit perfectly into the lugs and brazed together. The use of lugs creates an immensely strong joint, and being an older manufacturing technique carries a side perk of giving a bike a ‘classic’ look.

 

Steel bicycle frames are perhaps the easiest frames to repair due to the availability of the equipment and supplies, as well as the material’s resistance to repeated heat. For this reason, steel is a great option for commuters, recreational cyclists and touring riders that need a highly durable bike.

 

If you want to get more information about bike frames, I recommend that you can visit the website of Maxway Cycles Co., Ltd.: www.maxway-cycles.com. Maxway is a leading manufacturer of steel bicycle frames and other kinds of bike frames. The company has built up solid relationship with a lot of steel bicycle frame manufacturers in Taiwan who supply high quality steel bike frame, bicycle frame products at decent prices. For more details, please feel free to send inquiry to them.

 

 

Article Source: https://www.bikeexchange.com.au/blog/bike-frame-materials-explained

Touchless Faucets for Kitchens: How to Choose Smart, Motion Sensing, Electronic Taps?

Posted on by

Touchless faucets are the latest thing in kitchen fixtures. They are a good midpoint between traditional faucets and completely touchless systems. These ones turn on and off with a single touch, anywhere on the faucet. That really cuts down on germ contact, and gives you a lot more flexibility for tapping water on when you have your hands full or dirty.

 

Why Choose a Hand-Free Faucet?

 

  • Convenience:

 

First and foremost, it’s simply more convenient to have water turn on when you have your hands under the faucet. There’s no knob to turn, and you don’t have to worry about having a hand free or making some awkward maneuver to get water going.

 

We also love that you never have to worry about making sure you turn the water completely off when you’re done. We’ve all been in a hurry and forgotten to check the faucet. All those drips waste a lot of water when you’re out of the house all day! That’s not a problem when your fixture shuts off automatically!

 

  • Less Mess:

 

Since you’re not touching the faucet often, it stays much cleaner over time. You’ll see fewer spots and prints on the finish, and have a lot less cleaning to do. That segues very nicely into the next benefit of touchless models, which is:

 

  • Sanitation:

 

We all go to the sink to wash our hands. That means our hands are dirty. Whether you’ve been working with money all day at work, cleaned up after a pet mess, or been handling raw meat, the dirt and germs on your hands isn’t something you want on your faucet.

 

Annoyingly, by having to touch your faucet, you’re in a never-ending cycle of spreading those bacteria and nasties. Unless you’re careful to clean the faucet after each use, or to touch it with a clean part of your body, you can’t help getting something bad on the surface.

 

A touchless faucet means fewer germs and bacteria in your kitchen, and safer food prep for you and your family! It’s a win-win for cleaning and food safety!

 

  • Futuristic Style:

 

Finally, who wouldn’t want to have a kitchen fixture this futuristic? Touchless faucets might not be an absolute necessity, but they’re incredibly cool to use. Plus, they’ll impress guests every time you have people over.

 

How to Choose the Perfect Sensor Faucet

 

  • Decide On Your Budget:

 

Touchless models are always going to be a bit more expensive.

 

The more expensive options are generally more reliable, although that’s not always the case. You’ll also pay more for all-metal build quality, as well as smart features like locking sprayers and multiple spray modes.

 

  • Think About Durability:

 

Touchless faucets are, on the whole, less reliable than traditional fixtures. That’s because in addition to the usual pipes, valves, and joints, there’s an electronic system to think about. In fact, it’s usually the electronics that give out.

 

Because issues are par for the course with most models, you should make sure you’ve got a lifetime warranty. Double check the terms before you buy, to make sure all the parts (including the electronics) are covered.

 

You’ll also want to cover all the bases you’d cover with a normal fixture. Look for the maximum amount of metal parts, and make sure all the fittings are built to last.

 

Pay special attention to the handle and the pull-down sprayer, since these parts generally take the most beating. Some companies skimp on them by using plastic, so that’s something you’ll want to watch out for.

 

And just like with a traditional fixture, avoid chrome finishes like the plague. They’re a sure sign of plastic parts and cracks to come.

 

TIP: One really great thing that’s come out of online shopping is add-on warranty coverage. A lot of times when you purchase appliances or equipment, you can add a few years of coverage at the checkout. It’s provided by a third party who only does warranty claims.

 

So, if something happens during that add-on period, you can just call the warranty provider and have them take care of things. You don’t have to worry about some arduous runaround from a fixture company, or long waits and hassles to get a simple fix.

 

Since touchless fixtures can be so unreliable, it’s a good idea to spend a bit of money on some extra insurance for you if that’s available. We don’t think extra warranties are worthwhile for traditional fixtures, but they’re always the safest bet with emerging gadgetry!

 

  • Measure Your Space:

 

Before you buy any fixture, and especially something as expensive as one of these models, make sure you know exactly what your space requires. Measure all around your sink, taking account of the backsplash, the clearance you want above the sink, and any other shelves, sills, or obstacles you need to be aware of.

 

  • Think About Power:

 

The choice here is between battery packs and A/C power. Batteries are easy to install, since you don’t need wiring under the sink. That can be tricky to install and waterproof properly.

 

However, batteries eventually die. You’ll have to replace them, and risk having to do so in the middle of something important. Given that they last a year or so, though, there’s probably just as much a chance of A/C power cutting out with the same frequency.

 

If you’re in an area of the country that experiences power outages somewhat regularly, you’ll want to know whether your touchless faucet has any manual override settings. Many touchless models won’t work without power. Look at battery back-ups, or consider whether you’ve got a generator on your property.

 

Some more expensive options will work without any power, so you can always be sure you’ll have water. Of course, that will also depend on your water pump.

 

Where to Find Right Automatic Faucets?

 

Kingsway is a superior manufacturer of automatic sanitary products, and providing various types of sensor taps (touchless faucets) suitable for different places. The company insists to manufacture the best automatic faucets to meet the highest standard of customers’ demands.

 

If you need more information about Kingsway Touchless Faucets, try to visit their website and send inquiry to them.

 

 

Article Source: https://kitchenfaucets.reviews/touchless-motion-sensor-hands-free-automatic

Types of Side Release Buckles

Posted on by

Side Release Buckles and Other Fasteners

 

Whether you make paracord survival bracelets or other projects which require side release buckles, this article will show you some cool options and some other ideas you may not have considered for fastening your bracelets.

 

Buckles, in one form or another, are the most common way for fastening bracelets and other gear and there are so many types of buckles to choose from and ways to fasten them. Some of the buckles are metal, but more are plastic (less expensive). There are buckles with whistles built in and of course, they come in many different sizes.

 

Some people choose to make plain survival bracelets with nothing more than a knot and loop fastener. For the ultra-crafty people or those wanting to do something different, you can weave beads or other toggles on one end of the bracelet and then a simple loop on the other. Here we’re going to take a look at some of the more common fasteners that most of us use in our projects. In the end I think you’ll find some great ideas here for your next project.

 

Plastic Side Release Buckles Are Very Popular and They Come in So Many Different Sizes and Designs

 

For many people plastic side release buckles are their first choice because they are very affordable, and if you’re making bracelets and other projects as a hobby, well, you probably don’t want to spend a fortune on buckles. Also, if you’re making bracelets for a fund raiser or to re-sell then you want to maximize your profit, so again, plastic buckles would be the obvious choice.

 

The most common size of buckle used for paracord bracelets is 16 – 19 mm (5/8 or 3/4 inch). This measurement is the width of the hole in the buckle through which you place your strap or paracord. Because these plastic buckles are so affordable, you can get a few different sizes and experiment to find out which size, and which type of buckle you like best. While all of those mentioned in this section are side release, they don’t all have the same look and feel—some release easier than others, some are more robust (higher quality plastic), and some buckles are more rounded (contoured) and have a generally better feel while wearing.

 

There are also single adjusting and double adjusting buckles. Double adjusting simply means that there are two slider holes on each end of the buckle. On a backpack, for example, this would allow you to cinch up and tighten a strap from both sides. For a survival bracelet with paracord you don’t have the need or capability to adjust, so look for buckles with only one slider hole on each end if possible, for a better look.

 

Of course we also need to discuss the purpose that the buckles will serve. If you are planning on using them for a gear strap (say on a backpack or day bag), then you might want a larger or at least heavier duty one. If it is simply for looks and on a paracord bracelet, then the smaller plastic buckles will work fine.

 

If you’re planning on making a bracelet for a survival or safety use, maybe using some reflective paracord, then it might be a good idea to use buckles that have a whistle built in like the one pictured here. For the most part these whistles work alright, but they aren’t the loudest thing you’ve heard. That being said, for a lost hiker, or a jogger trying to summon help, they will do the job. And they look kid of cool, too.

 

Metal Side Release Buckles Give Your Project Added Strength

 

And of Course the Ultra-Tough Look That You Want in a Survival Bracelet

 

There are many reasons why people choose plastic over metal side release buckles, and perhaps the two biggest reasons are 1) the cost increase by using metal buckles is significant if you use a lot of them, and 2) there’s added weight and bulk when using metal. However, there are still applications where metal is the right choice.

 

There are far fewer style choices when it comes to metal buckles, due to their decreased demand and also because of the relative greater difficulty and cost in manufacturing. In tactical applications you will almost always see plastic being used whenever possible, because it decreases the magnetic presence of the wearer (think bombs and IED’s), and also because there are no spark concerns, nor are there any rust related issues to contend with. Finally, plastic buckles rely on the tension created naturally by the displaced connectors when they’re snapped into place. Metal buckles, on the other hand, rely on small, internal springs to retain their tension… meaning that they can wear out and fail, while the plastic buckles are much more likely to retain their shape and strength over time.

 

There are no bells and whistles (literally) on the metal buckles, and your choices are limited to basically the size you want.

 

Plastic Buckles with Side Release Are Cool

 

But These Steel Shackles Give You the Ultimate Survival Look

 

Are you looking for some really cool buckles to make something really unique, or do you have a project that requires something more robust than plastic buckles? There are tons of things to be made with paracord beyond bracelets, and so many ways to make them all. More and more people are getting creative and making their products their own. And lot’s of people prefer the rugged look of the metal shackle buckles. I admit it, I like them, too!

 

As you can see, using this type of buckle gives much more strength and reliability than a typical side release buckle. Of course the cost is higher, but the end product is clearly much more appealing. Again, it will boil down to the project. For fund raisers you will almost certainly want to stick with the plastic buckles.

 

One of the Coolest Paracord Projects with Buckles

 

Make a Dog Collar With These Large Reflectors, Side Release Buckles!

 

If you have a dog, or know someone who does, you can make a really cool personalized gift: a reflective dog collar. Using ultra-cool reflective paracord colors and this large side release buckle that includes a reflector, you have the makings for something special.

 

No dogs? These make great luggage straps—the kind you wrap around your luggage to ensure that it doesn’t pop open when airport security or those guys on the conveyor belts throw it around. There are lots of ways you can make something really creative with these plastic buckles! Check it out.

 

What Are Your Thoughts on Buckle Types? Side Release or Shackles?

 

Ok, now that you’ve had a chance to look at some of the different types of buckles, including the side release and metal shackle types, here’s a question. If you were going to make a paracord bracelet, right now, and had both types in front of you, which would you use? More details check out here: Do you prefer plastic buckles or metal shackles?

 

By the way, if you need more selections of release buckle and plastic buckle, I recommend that you can visit the website of SHIN FANG and DYI ER KANG. Both of them are professional plastic buckle manufacturers in the industry. Try to check out their website to obtain ideal bag accessories you need.

 

 

Article Source: https://feltmagnet.com/crafts/side-release-buckles

How to Wear a Lapel Pin

Posted on by

Adding a lapel pin to your outfit can give it the edge that makes it a suave, elegant ensemble. If done right, it shows you really know how to put together an outfit.

 

But considering how small lapel pins are they can be a lot of hassle to figure out. So, we’ve put together a guide answering all the questions you may have about wearing a lapel pin.

 

What is a Lapel Pin?

First thing’s first, what is a lapel? They’re the parts on each side of a coat or jacket immediately below the collar that are folded back on either side of the front opening. There are several different pin types that can be placed on the lapel for a fashionable flair:

 

  • Boutonniere

The most formal of the lapel pins for men, the boutonnière is a floral pin that can be either fashioned from a real flower and pin, or a fabric one – high quality ones often being made from silk. Because of their formality, these are most commonly worn at black tie events, funerals and weddings.

 

  • Long-Stem Pins

The long-stem is a more contemporary fashion pin for the modern gentleman. With an eclectic range of styles, you’ll be able to find something you like for any event. Popular designs are crafted from metallic materials and fashioned into flowers, feathers, animals – the variety is huge. Each will have a long-stem pin to securely attach it to the lapel.

 

  • Badges / Mini Pins

Badge or mini pins can be a fun way to personalize your outfit. Much like cufflinks, they’re available in a range of different designs; you can find anything from precious stone pins, personalized badges to vintage pins.

 

Lapel Pin Placement

 

What Side to Wear Lapel Pin

So where does a lapel pin go on a suit? There’s one uncompromising rule when it comes to pin placement: it must be on the left lapel, slightly under the collar point and north of your pocket square if you’re wearing one. Some suit jackets will have buttonholes made for this purpose, but if yours doesn’t, you can carefully pierce the pin straight through the material.

 

  • Lapel Pin on a Tie

If you’re not wearing a jacket, but are sporting a tie, you can wear a lapel pin on your tie. In this scenario it’s most common to place the lapel pin toward the middle of the tie. However, if you are wearing a jacket, it’s always best practice to place it on the left placket rather than anywhere else.

 

  • Lapel Pin on Dress Shirt

If you’re wearing neither a jacket nor tie you can place the lapel pin on a dress shirt. This can be positioned on the left side of the shirt, near the heart, where the lapel would usually be.

 

  • Lapel Pin on Coat

To showcase your lapel pins on a more regular basis you could place it on coat. For every day wear it’s common to use badges or mini pins as coat pins. Most high quality and more formal coats will feature a buttonhole on the left lapel. If not, you could pin these to the left lapel or even collar to give your outerwear look that element of individuality.

 

  • Lapel Pin Etiquette

One of the ongoing debates is whether the bottom of boutonnière or long-stem pins should be visible or hidden behind the lapel. Although keeping the bottom of the pin concealed is more traditional, it’s becoming increasingly popular to keep the bottom showing for a slightly edgier, cool look – especially if it’s a smaller pin design. There’s no right or wrong way. Try both and see what you feel goes best with your ensemble.

 

Because there’s such a wide range available, choosing a color for your lapel pin can end up being a tough decision. We believe that the color of your lapel pin should complement the rest of your suit rather than clutter it with colors or patterns that match your tie or pocket square. If in doubt, go with a neutral color like off white or grey that compliments most colors.

 

Although you may be a big fan of going all out at events, over accessorizing can be a serious faux-pas. Wearing multiple lapel pins, even if they’re really cool lapel pins, can sometimes look messy unless it’s for a cause like a red poppy. To achieve a sophisticated look it’s often best to be understated.

 

When to Wear a Lapel Pin

Now you know how to wear a lapel pin, it’s good to distinguish appropriate and inappropriate moments to wear lapel pins in which variety of shapes and sizes.

 

Formal Events

More formal events are the ideal opportunity to show off your lapel pins. If you’re wearing a tuxedo to a formal or black tie event the lapels will usually be peaked. This type of lapel is traditionally the most formal and fashion-forward. However, shawl collars are also acceptable. In these cases it is customary to wear the lapel pin on the left lapel which should already have a working buttonhole. Wearing a tuxedo is an occasion for a boutonnière – ideally a real single blossom in preferably red or white.

 

A boutonnière, real or material, can also be worn at a wedding. The most popular and traditional choice of flower is the carnation. A white carnation is the most formal color, but other colors and flowers are becoming increasingly common. Often if they fit into the wedding theme, alternatives such as lavender, roses and sunflowers have been used.

 

Business

In the past it was common for businesses to award employees a lapel pin to symbolize their achievements or show affiliation. Although not as common in modern-day organizations, these types of lapel pins are acceptable every day wear as a suit or coat pin. However, you should use your discretion to determine whether it’s appropriate to wear at an event like a wedding or funeral.

 

Everyday Wear

Perhaps a rose lapel pin might be out of place down at the pub on a Friday night, but that doesn’t mean that other types of lapel pins can’t be everyday wear. Other more subtle pins like a long-stemmed lapel pin could give your suit that extra flair while you’re doing your daily routine at the office. Badges and mini pins can even be worn without a lapel – just attach them to a casual jacket, sweater or duffle coat to give your outfit that extra character and personality.

 

Although lapel pins have their place at more formal events like weddings, if you know how to properly style them, there’s no reason they can’t make more regular appearances. They’re the perfect way to give your outfit that striking flair it needs. With this knowledge of lapel pin etiquette behind you, maybe you’ll find the confidence to sport that new lapel pin at work or on at a dinner date.

 

Tech Arts International Co., Ltd. is a professional Lapel Pin Manufacturer based in Taiwan. The company provides a wide range of hard enamel lapel pin, soft enamel lapel pins, printing lapel pin, promotional lapel pin, logo lapel pins, etc. If you are interested in learning more information about lapel pins, try to check out Tech Arts’s website.

 

 

Article Source: https://www.gloverall.com/blog/how-to-wear-lapel-pin/