Daily Archives: January 12, 2018

Advantages and Disadvantages of VNA Trucks Design

Posted on by

Determining the ideal aisle width for your application means you need to look at a lot of factors. Is Very Narrow Aisle, or VNA, right for your warehouse? In this article, I am going to go over the advantages and disadvantages of VNA truck design, and when you would use it.

 

First of all, Very Narrow Aisle is defined as less than 6 feet between the racks, and is usually used with selective pallet rack. Often, guidance systems like guide rail or wire is used to keep the trucks on track. The main component that decides your aisle width is your lift truck. If you are doing VNA, you will need a special forklift to navigate the aisles, you can’t use a standard forklift. VNA trucks (turret trucks) usually only turn the load instead of the whole vehicle, and isn’t dock working trucks.

 

Will VNA Trucks Work For You?

NA2.0 VNA Truck

Advantages:

  • Improves space, you can store 40%-50% more inventory
  • Good for applications with less than pallet storage
  • High productivity in full pallet retrieval

 

Disadvantages:

  • Requires a certain lift truck which is more expensive
  • Two vehicles cannot pass at the same time
  • Lower flexibility, you usually have to store the same SKU
  • Requires a “hand-off” of inventory from the VNA forklift to a dock working forklift on outbound, and the opposite for inbound

 

If the pros outweigh the cons, then utilizing Very Narrow Aisle would be beneficial to your warehouse.

 

Need more VNA Trucks information, try to visit the well-known forklift truck manufacturer – Tailift Material Handling Taiwan Co., Ltd. The company provides kinds of material handling equipment, including counterbalance trucks, electric pallet truck, electric towing tractor, VNA trucks, and much more electric forklift trucks. For further details, please check Tailift product pages and send inquiry to them.

 

 

Article Source: https://www.steinservicesupply.com/blog/advantages-and-disadvantages-of-vna-design

HMF Invests To Boost Production Capacity

Posted on by

Danish family-owned crane manufacturer HMF has invested heavily in automated production processes to meet increasing international demand.

HMF Pipe Bending Machine

The company has invested in a brand-new production line for knuckle booms, where the optimized flow ensures that knuckle booms are ready-manufactured in one single workflow, before sending them directly into the fully automatic paint facility.

 

In connection with the new production line, HMF is also implementing a brand-new welding robot that uses leading technology with adaptive welding and a fully automatic conveyor system. A new drilling center capable of handling very big items has also been added to the new production line for knuckle booms.

 

“In general, HMF experiences an increasing demand especially for larger cranes. Thereby the need for more jib extensions increases correspondingly as does the need for hydraulic pipes,” said HMF.

 

In response to this demand, the company has ordered a new fully automatic pipe bending machine for hydraulic pipes, which is to ensure the necessary capacity and delivery time. At the same time, the test capacity for large range cranes has been increased by 50%.

 

Concurrently with the increasing order intake, the number of employees has now exceeded 550 and in March HMF started using two newly refurbished office buildings. This made room among others for an extension of the R&D capacity with more than 25%.

 

The manufacturer is introducing a welding robot at the HMF Welding Academy as well, where the purpose is to train young metalworkers as well as upskilling their existing employees. Here HMF has also invested in analysis equipment for securing the quality of the weld seams.

 

“At the same time as we are investing heavily in new processes, facilities and staff, it goes without saying that we also optimize where we can. For example, we have gone through our entire range of sub-suppliers, and among others we have changed from yellow chromate to zinc-nickel treatment on sub-components to further enhance quality, just as we ensure capacity with our sub-suppliers – among others by Northern Europe’s most modern laser cutter,” said CEO Brian Stage.

 

Recommend Pipe Bender Machine Manufacturer – Shuz Tung Machinery

CNC16 Bending Servo Control Bender

Established in 1978, Shuz Tung has been dedicated to manufacturing of various machinery and automation equipment. More than 30 years, Shuz Tung has accumulated advanced and professional techniques for superior production quality on practical and solid ground. The efforts and achievement are high recognized by all the customers.

 

Based on the long experience in pipe bending field, Shuz Tung has won the great confidence from customers who count on the precision and effectiveness the pipe bending machines deliver. The company will show you how you can utilize your pipe bending machine in your store for a high quality service to your customers. If you have any interest in pipe bender series, try to visit Shuz Tung and send inquiry to let them know your requirements.

 

 

Article Source: Cranes Today Magazine

Article Source: Industry News