LED Bicycle Lights for Safer Night Time Rides

Posted on December 29, 2016 by Camille F.

Bicycle enthusiasts know what it’s like to travel at night. The risks of a mishap occurring is much higher than when traveling in day time. Of course very early on, we have come to rely on LED bicycle lights for lighting our way and warn other commuters of your presence on the road.

Why LED?

Brightness – Ever since light bulbs were created, they have continued to evolve. When halogen bulbs came around we were duly impressed by their brilliance and everything that said “Halogen” was considered high-end. More brightness came when LEDs gained notoriety. Compared to the old halogen bulbs, LEDs provided at least 10 times MORE candlepower. Not only that but they are also winners in conserving energy and durability as I will explain further on.

Energy saving – The conventional flashlight bulb or halogen bike bulbs that we were so impressed with before would give out about six to 10 hours, depending on usage, of light. However, the energy needed by LEDs to provide light while cycling is much less than that. In fact, they lasted close to 100 hours. This comparison is made by using four double A batteries for both types of light source. The halogens had a combined output of 300 candlepower whereas the LED had an output of 1,500 candlepower!

Replacements – Do you still remember how we were so used to changing flashlight batteries practically on a daily basis? And if that give us light, we also know what the other problem is too, right? You would have to replace either your battery set or pack or perhaps your light bulb. Compounding that problem is the availability of the bulb, or spares batteries for that matter. You would have to stock up on both just to ensure you will have consistent lighting on your bike. With LEDs, all those problems are a thing of the past. Since they use much less energy, they last a lot longer and they never burn themselves out even as the power fluctuates when the batteries are near empty.

Now how does all this information relate to a cyclist?

Confidence – With so much illumination and time before it dies off due to power drain, you’d never have to worry about your lights. In all likelihood, you would have no more energy to go on and your bike’s light would still continue to shine way ahead of you.

Safety – Now that you’re confident about your lights, you will have more time to focus on what’s really important – getting from one point to another safely. Furthermore, because of the bright luminescence, you will be always visible even from afar by either oncoming or following vehicles that share the same road with you.

Fun – I guess that is what it all boils down to, right? Your well-deserved trust in the capacity of your LED lights eliminates all other worries that you can actually enjoy the ride itself. You know that even with the brightest moonlight lighting your way, your LED bicycle light still outshines it.

Welcome to visit the website of BEV, the professional bike parts manufacturer, to learn more information and specifications about LED bicycle lights and a variety of bike accessories. Feel free to contact with BEV.

Article Source: http://EzineArticles.com/8621962

How Important Are MTB Bicycle Frames?

Posted on November 25, 2016 by Camille F.

MTB bicycle frame is the basis for the bicycle’s sturdiness, weight and general appearance. This is why when purchasing new mountain bikes, most cycling professionals and enthusiasts give the frames a thorough check instead of just giving it a casual or cursory look. Though it may appear similar to a casual observer, each frame has different sizes, symmetry and materials used which is tailored for a particular body structure of the cyclist who will be riding it.

Most of the mountain bike frames available in the market today is usually made up of aluminum steel. This makes for a sturdy, yet very light structure, making it easy for the cycling enthusiast to maneuver. Although there are still frames that are made up of galvanized iron or steel, these are rapidly fading fast into oblivion and is being replaced by aluminum and some other lighter materials like titanium.

Naturally, if you are a cyclist, you always undoubtedly would prefer the lightest material to make up your frame. This is where the ultra-lightweight metal call titanium comes in. Bike frames that are made of titanium are almost weightless, yet are sturdy enough to withstand the rigors of cross country cycling. The only problem with titanium as of the moment is the exceedingly high cost which only a few cycling enthusiasts can afford. This is why most cycling enthusiasts still prefer their bikes to have aluminum frames because they are very affordable. Though they may not be as light as those frames which are made from titanium, aluminum frames do exceedingly well in various types of tracks.

Another area of consideration which you must carefully check out is the size of the frame. Bear in mind that MTB bicycle frames have different sizes which correspond to the height and body physique of the cyclist who would be riding it. The size of the mountain bike frame is usually determined by measuring the expanse of the frame from the center of the base bracket to the uppermost portion of its top tube.

Getting the right bike frame is very important since it can affect the way you maneuver your bicycle. Remember that all frame sizes are influenced by the unique body structure of the cyclist who will be riding it which is why you have to carefully select the MTB bicycle frame with a size that closely matches your own body physique.

Once you have correctly determined the weight and the size of the mountain bike frame that you consider perfect for your body structure, you can now begin that exciting cross country journey that you have been longing to indulge into. If you need further information about MTB bicycle frame, welcome to visit the website of MAXWAY and feel free to contact us!

Article Source: http://EzineArticles.com/expert/Suzie_Sanchez/456211

Article Source: http://EzineArticles.com/4683080

How to Choose the Right Bicycle Saddles for Riders

Posted on November 16, 2016 by Camille F.

Finding the right bicycle saddle is crucial since this greatly affects the rider’s comfort and performance in their ride. Picking the right saddle is actually challenging for all riders regardless of their weight and size. For heavy riders however, the additional weight and pressure put on the seat may cause discomfort and strain. Here are a few things heavy riders may want to consider in choosing a saddle for cycling comfort.

Consider the width of the saddle. The idea of the saddle is to support the two “sit bones” to keep the rider balanced on the bike. Heavy riders may want to consider choosing a slightly wider saddle for better support and comfort on their backside but not too wide as this may cause chaffing or rubbing.

Consider the bicycle saddle pad. It is a misconception that the best saddle pads are those that are soft and thick. While these types of pads can be comfortable in the beginning, these can cause excessive heat as these absorb much pressure from the rider’s weight and movement and thus create discomfort during the ride. Experts suggest that heavy riders get a saddle seat with firmer foam since this doesn’t quickly compact compared to a foam or gel cushion. Also, experienced heavy riders agree that it is wise to choose bicycle saddles with the least cushioning but still is comfortable for the rider to sit on. It may take some time to get used to riding a firm saddle but over time, the ride would be more pleasant.

Consider durability. Because foam saddles easily wear out for heavy riders, these have to be replaced more often than a lighter cyclist would. Experts suggest that leather saddles can be a great option for heavy riders since these are more durable. Also, the longer the rider stays on the saddle; the seat becomes molded to the rider’s anatomy.

Shop wisely. It is advisable that a rider give the bike a test ride before buying it. During the test ride, the rider may vary positions on the saddle, ride on different speeds, hit some bumps and try some uphill terrain. This way, the rider can test the comfort of the saddle seat and the sturdiness of the saddle seat. Also, it is suggested that the rider also inspect the rails of the saddle. Although chromoly is the most affordable and suitable for most riders, titanium rails are more durable and long-lasting.

Considering all the factors, the key to finding the right bicycle saddles is optimum support and comfort for the rider.

BEV was established in1992 and is one of the bicycle industry’s leading component manufacturers. We are proud to offer the finest quality bicycle saddles, frames, forks, handle bars, bar ends and much more to customers and OEM producers around the world. If you are interested in and need further details about bicycle parts, welcome to visit our website and feel free to contact BEV now!

Article Source: http://EzineArticles.com/expert/Joan_Bishop_Denizot/2223664

Article Source: http://EzineArticles.com/9364794

Comparison between Automotive Oil and Motorcycle Oil

Posted on November 10, 2016 by Camille F.

Oil is quite essential for the smooth functioning of engines in both motorbikes and automobiles. However, there are different types of oils which have different types of viscosities and it should be chosen accordingly. In the past, engine oils used in cars and motorcycles varied hugely due to various factors. Nowadays, both cars and motorcycles are manufactured with revving engines that can use automotive oil without any bad effects.

Motorcycle oil VS Automotive Oil

Although both these can be used in bikes, the engines of both cars and motorbikes function are different and their require oils are specifically formulated. Compared to the car engine and bike oils are expensive. Most of the motorcycles include some important factors which enable better performance and durability of the motorcycles. Car oil is quite inexpensive compared to bike. Some of the major differences between these two types are elaborated below.

Viscosity:

Compared to the automotive and bike is thinner even though both these oils are classified under the same viscosity. This is made thinner so that it provides better and easier lubrication for small internal parts in the motorbikes.

Price:

It is quite expensive compared to car oil as it is highly refined. Bike oil is thoroughly refined so that it provides better lubrication and passes easily through small internal components in the vehicle. As it requires an extended refining process, it is quite expensive than the standard types of engine oil. However, it is important to purchase motorbike engine oil for vehicles as it guarantees better performance and higher durability of the engines.

Reduction of heat:

In comparison to the automotive oil, this oil is designed to reduce the amount of heat generated in the internal parts of the engine. Moreover, heat is generated in focal points in these engines compared to car engines.

Specifically formulated oil:

As compared to cars, bikes require specifically formulated one as oil breaks down faster in bikes due to the continuous meshing of gears. So all the motorbike engine oils are designed and formulated specifically for bikes.

Different additives:

Automotive do not contain additives which are present in motorbike engine oils. Various types of additives such as PTFE or Teflon are included in these to reduce excessive heat and friction. This is coated onto the gears of the vehicle.

Friction:

The engine oils used in bikes helps to reduce friction and thereby prevents clutch slippage. It can therefore be used effectively in vehicles with oil-wet clutches. But car engine seldom can be used to reduce slippage or friction.

However, when exposed to extreme pressure and heat, both these types of engine oil breaks down which further causes thinning of the oil. It then fails to lubricate the engines effectively.

Today with technological developments in various fields, different types of engine oils are made available quite easily in most of the online stores. Synthetic oil is another type of automotive oil used in most of the vehicles today.

Min Jung Hong is a professional manufacturer of specializing in motorbike engine oil and various high performance motor oils. If you are interested in and need further information, welcome to visit our website and feel free to contact us!

Article Source: http://EzineArticles.com/expert/Anamika_Swami/720304

Article Source: http://EzineArticles.com/7127103

Cyclocross Bike Frame and Its Related Simple Introduction

Posted on October 18, 2016 by Camille F.

What is cyclocross?

Cyclocross is a discipline that combines both off-road and on-road cycling. Typical cyclocross terrain includes grass, woodland trails, pavement, mud and even sand!

Rapidly growing in popularity, cyclocross racing is primarily an autumn/winter sport – with tens of thousands of fans attending races in Northern Europe. The attraction of cyclocross racing is the fast and frantic pace, around a lapped circuit of 2-3km in length.

The good news is, you can do cyclocross all year round! A cyclocross bike is incredibly versatile, and can make the perfect commuter, touring bike or do-everything ride.

What is unique about a cyclocross bike?

At first glance, a cyclocross bike can appear to look like a road bike; however there are many features that make them uniquely different and more suited to the specific purpose of multiple terrains riding.

These differences include the tires, frame design, brakes, gears and pedals. Below we only introduce the cyclocross bike frame designs.

Cyclocross bike frame design

The frame of a cyclocross bike has been adapted from a standard road bike frame, in a number of ways:

Increased tire clearances on the frame and fork – A cyclocross bike frame have increased clearance for tires on the front and rear of the frameset. This is so that you can use larger volume tires, for increased grip and traction; as well as allowing the wheels to keep turning, even when they are carrying significant quantities of mud or trail debris in the tire tread.

Frame geometry – Cyclocross bikes often have more relaxed geometry angles, to give them a more upright riding position than a road racing bike. This position helps with shock absorption off-road, but it also allows you to utilize the bike across multi-disciplines, such as touring and commuting.

Frame material – Many modern high-end road bikes are now made of carbon fiber, due to its light weight and vibration absorbing characteristics. Cyclocross bikes have followed this trend too, with many high end models made of carbon. However, aluminum and steel frames are also still popular; because they provide a lower cost option, and provide a more durable frame if the rider wants to use the bike for touring or commuting.

Frame sizing on cyclocross bikes

As with all bikes, the sizing of cyclocross bikes is vital to maximizing comfort and performance when you are riding. This is especially important if you are going to be using the bike for long distance touring or winter training as well.

What else can I use a cyclocross bike for?

Cyclocross bikes are not just reserved for use off-road. The relaxed geometry, strong frame, powerful braking and good tire clearance, mean a cyclo-cross bike is highly versatile machine. ‘Cross bikes can easily be used for other disciplines within the sport; such as commuting, winter training, cycle touring and off-road adventures.

When you are considering our range of cyclocross bikes, you may want to consider what other uses you may have for the bike; some bikes have mounts for pannier racks and mudguards, as well as more powerful disk brakes that are ideal for touring with heavy loads.

If you need more details about cyclocross bike frame and other bicycle frames, welcome to visit our website and feel free to contact MAXWAY – the professional bike frame manufacturer in Taiwan.

Article Source: http://guides.wiggle.co.uk/cyclocross-bike-buying-guide

About Bicycle Equipment

Posted on March 24, 2016 by Camille F.

Bicycle equipment is varied and can be used for quite a number of fun and healthy activities. There are indoor types of bike equipment and outdoor ones. Both can be used for fitness purposes and other less conventional reasons. Some kinds of cycle equipment come with the bicycle when it is bought but others are bought to supplement the work of the bike. Whichever the case, bicycle equipment is very important and all cyclists should consider them a must have.

Equipment that comes with the bike includes the bicycle pump which usually comes in very handy in case the bike gets a flat or the tubing gets spoilt. To go with this you should make sure that your bicycle has a repair kit which you can use to repair the tyre. Also you may need to keep a spare tube just in case one of the tyres gets old and worn out. All this equipment may sound a bit bulky and you may not probably be able to envision it on a bicycle but when you see the recent customized bikes, you will not be able to even notice where they are.

The other type of equipment is useful for indoor use. The best part about indoor bicycle equipment is that one does not need to have a huge backyard to use them. This is because they are mostly stationary. Indoor stationary can be used as a supplementary to the bicycle. They have been used by top cyclists in the world and more generally by people who would like to keep fit without actually taking to the outdoors to cycle. Some examples of indoor equipment include the bike trainer. This equipment can be used both for aerobics and for weight loss programs. It enables one to have a safe and self-paced training regime that has very low impact levels.

Bicycle equipment is used by sportsmen to keep fit for their sporting activities and also by regular people to stay healthy. They have also been used by doctors and physiotherapists to help patients with cardiovascular problems get better. Heart problems are sometimes caused by lack of exercise which causes an accumulation of fatty tissue around the heart. Bike trainers and stationary bikes help patients to get back in form and get their hearts working right again. cycle equipment can be purchased at sports stores or if you do not want to buy one you can join a gymnasium and get to use the equipment they have there at a yearly or monthly fee.

Buying top quality bicycle equipments for those who enjoy riding their bikes.

Article Source: http://EzineArticles.com/?expert=Claire_L_Andrews

Article Source: http://EzineArticles.com/6894828

Getting The Right Suppliers For Your Bicycle Parts Needs

Posted on December 9, 2015 by Camille F.

There are certain times when it is best to go to a local brick and mortar bicycle dealer and parts supplier in order to suffice your needs. Whenever, you are going to these local shops you should ask them or get answers to the 5 crucial questions.

The 5 questions that you should ask your local bicycle parts and accessory dealers or suppliers are:

1) What are the return policies?

2) Are the products carried by the local dealers or suppliers original equipment manufacturer (OEM)?

3) What are the warranties?

4) How many of the specific item(s) you want, has the supplier sold?

5) How many years has the local supplier been in business?

When it comes to bicycle parts and accessory, finding the right suppliers for those bicycle parts may be an expensive journey. For the most part, getting these supplies online may be the cheapest route. eBay should be the first place that you try searching in order to get an idea of how much the supplies are going to cost you. One main thing that you should do when going the eBay route is to closely examine the seller’s feedback. Look to see if they had sold other cycling products and if their feedbacks are positive.

In order to save yourself some money and heartache later, it is best to ask these 5 questions before you make your first purchase. Many cyclists that I know don’t ask these questions ahead of time and are now regretting it. Be a smart cyclist consumer and get to know the 5 crucial questions.

Article Source: http://EzineArticles.com/?expert=Charlie_Thai

Article Source: http://EzineArticles.com/1036356

Taiwan Bike Parts & Bicycle Parts Manufacturer – TRIGON

Posted on October 14, 2011 by Camille F.

After over 20 years of bike parts manufacturing experience, Trigon has the knowledge, ability and knowhow to make your dream a reality. We were one of the pioneers in the carbon cycling industry. Through this experience, We have the mastery required to make carbon dreams in your mind and in drawings into a production possibility.

Our factory is equipped with the state-of-the-art facilities to develop and manufacture latest bike frame products to meet diverse needs of buyers around the world. High modulus and high strength material, cured at high temperatures using Trigon proprietary forming techniques, producing a composite with unsurpassed fatigue resistance and vibration damping bike parts. It conducts strict quality control to ensure our products are produced to meet highest standard of customers’ satisfactions.

bike frame

Great Go Cycles Inc.
No.146, Ching Nian Rd., Tachia Town, Youshih Industrial Park, 
Taichung County, 437, Taiwan
Tel: 886-4-26821225
Fax: 886-4-26821235
e-mail: greatgo@ms24.hinet.net

The Bike Frame Manufacturer in Taiwan – Maxway Cycles

Posted on October 14, 2011 by Camille F.

Maxway is a technical steel bike frame manufacturer in Taiwan. It takes pride in having the high quality products in our industry and in having meticulous control over quality and production. We are specialize in producing all types of Top-End bike frames in aluminum, steel and carbon fiber composite materials, from suspension, recumbent, electrical, trial, dual slalom and BMX. We have built up solid relationship with lots of bicycle manufacturers worldwide. And supply high quality and preferential steel bike frame, bicycle frame products. Constant research and develop wonderful products is our wish, so that we can offer a diversified steel bike frame product to meet what buyers’ need. If you are interested in any bicycle frames, try to contact Maxway, we quite pleased to serve and help you with products information.

steel-bike-frame

MAXWAY CYCLES CO., LTD. 
No.139-3, Dongming Road, Dajia Dist. Taichung City 43773, Taiwan R.O.C.
Tel: 886-4-26815668
Fax: 886-4-26816448
Attn: Meg Chiu
Email: maxway@mail.maxway.com.tw

The Professional Bicycle Frame Manufacturer – MAXWAY

Posted on October 4, 2011 by Camille F.

MAXWAY is a skilled bicycle frame manufacturer. It is specialize in producing various types of Top-End bike frames in steel, aluminum and carbon fiber composite materials. From conventional hardtail, suspension, recumbent, electrical, trial, dual slalom and BMX. They have built up solid relationship with a lot of steel bicycle frame manufacturers worldwide who supply high quality steel bike frame, bicycle frame products at preferential prices.

MAXWAY takes pride in having the best quality of products in the industry and in having meticulous control over quality and production. Constant research and development is their pursuit so that they can offer a diversified steel bike frame product to meet customer’s needs. If you are interested in steel bicycle frames, try to contact MAXWAY.