Category Archives: Fashion

Types of Side Release Buckles

Posted on by

Side Release Buckles and Other Fasteners

 

Whether you make paracord survival bracelets or other projects which require side release buckles, this article will show you some cool options and some other ideas you may not have considered for fastening your bracelets.

 

Buckles, in one form or another, are the most common way for fastening bracelets and other gear and there are so many types of buckles to choose from and ways to fasten them. Some of the buckles are metal, but more are plastic (less expensive). There are buckles with whistles built in and of course, they come in many different sizes.

 

Some people choose to make plain survival bracelets with nothing more than a knot and loop fastener. For the ultra-crafty people or those wanting to do something different, you can weave beads or other toggles on one end of the bracelet and then a simple loop on the other. Here we’re going to take a look at some of the more common fasteners that most of us use in our projects. In the end I think you’ll find some great ideas here for your next project.

 

Plastic Side Release Buckles Are Very Popular and They Come in So Many Different Sizes and Designs

 

For many people plastic side release buckles are their first choice because they are very affordable, and if you’re making bracelets and other projects as a hobby, well, you probably don’t want to spend a fortune on buckles. Also, if you’re making bracelets for a fund raiser or to re-sell then you want to maximize your profit, so again, plastic buckles would be the obvious choice.

 

The most common size of buckle used for paracord bracelets is 16 – 19 mm (5/8 or 3/4 inch). This measurement is the width of the hole in the buckle through which you place your strap or paracord. Because these plastic buckles are so affordable, you can get a few different sizes and experiment to find out which size, and which type of buckle you like best. While all of those mentioned in this section are side release, they don’t all have the same look and feel—some release easier than others, some are more robust (higher quality plastic), and some buckles are more rounded (contoured) and have a generally better feel while wearing.

 

There are also single adjusting and double adjusting buckles. Double adjusting simply means that there are two slider holes on each end of the buckle. On a backpack, for example, this would allow you to cinch up and tighten a strap from both sides. For a survival bracelet with paracord you don’t have the need or capability to adjust, so look for buckles with only one slider hole on each end if possible, for a better look.

 

Of course we also need to discuss the purpose that the buckles will serve. If you are planning on using them for a gear strap (say on a backpack or day bag), then you might want a larger or at least heavier duty one. If it is simply for looks and on a paracord bracelet, then the smaller plastic buckles will work fine.

 

If you’re planning on making a bracelet for a survival or safety use, maybe using some reflective paracord, then it might be a good idea to use buckles that have a whistle built in like the one pictured here. For the most part these whistles work alright, but they aren’t the loudest thing you’ve heard. That being said, for a lost hiker, or a jogger trying to summon help, they will do the job. And they look kid of cool, too.

 

Metal Side Release Buckles Give Your Project Added Strength

 

And of Course the Ultra-Tough Look That You Want in a Survival Bracelet

 

There are many reasons why people choose plastic over metal side release buckles, and perhaps the two biggest reasons are 1) the cost increase by using metal buckles is significant if you use a lot of them, and 2) there’s added weight and bulk when using metal. However, there are still applications where metal is the right choice.

 

There are far fewer style choices when it comes to metal buckles, due to their decreased demand and also because of the relative greater difficulty and cost in manufacturing. In tactical applications you will almost always see plastic being used whenever possible, because it decreases the magnetic presence of the wearer (think bombs and IED’s), and also because there are no spark concerns, nor are there any rust related issues to contend with. Finally, plastic buckles rely on the tension created naturally by the displaced connectors when they’re snapped into place. Metal buckles, on the other hand, rely on small, internal springs to retain their tension… meaning that they can wear out and fail, while the plastic buckles are much more likely to retain their shape and strength over time.

 

There are no bells and whistles (literally) on the metal buckles, and your choices are limited to basically the size you want.

 

Plastic Buckles with Side Release Are Cool

 

But These Steel Shackles Give You the Ultimate Survival Look

 

Are you looking for some really cool buckles to make something really unique, or do you have a project that requires something more robust than plastic buckles? There are tons of things to be made with paracord beyond bracelets, and so many ways to make them all. More and more people are getting creative and making their products their own. And lot’s of people prefer the rugged look of the metal shackle buckles. I admit it, I like them, too!

 

As you can see, using this type of buckle gives much more strength and reliability than a typical side release buckle. Of course the cost is higher, but the end product is clearly much more appealing. Again, it will boil down to the project. For fund raisers you will almost certainly want to stick with the plastic buckles.

 

One of the Coolest Paracord Projects with Buckles

 

Make a Dog Collar With These Large Reflectors, Side Release Buckles!

 

If you have a dog, or know someone who does, you can make a really cool personalized gift: a reflective dog collar. Using ultra-cool reflective paracord colors and this large side release buckle that includes a reflector, you have the makings for something special.

 

No dogs? These make great luggage straps—the kind you wrap around your luggage to ensure that it doesn’t pop open when airport security or those guys on the conveyor belts throw it around. There are lots of ways you can make something really creative with these plastic buckles! Check it out.

 

What Are Your Thoughts on Buckle Types? Side Release or Shackles?

 

Ok, now that you’ve had a chance to look at some of the different types of buckles, including the side release and metal shackle types, here’s a question. If you were going to make a paracord bracelet, right now, and had both types in front of you, which would you use? More details check out here: Do you prefer plastic buckles or metal shackles?

 

By the way, if you need more selections of release buckle and plastic buckle, I recommend that you can visit the website of SHIN FANG and DYI ER KANG. Both of them are professional plastic buckle manufacturers in the industry. Try to check out their website to obtain ideal bag accessories you need.

 

 

Article Source: https://feltmagnet.com/crafts/side-release-buckles

How to Wear a Lapel Pin

Posted on by

Adding a lapel pin to your outfit can give it the edge that makes it a suave, elegant ensemble. If done right, it shows you really know how to put together an outfit.

 

But considering how small lapel pins are they can be a lot of hassle to figure out. So, we’ve put together a guide answering all the questions you may have about wearing a lapel pin.

 

What is a Lapel Pin?

First thing’s first, what is a lapel? They’re the parts on each side of a coat or jacket immediately below the collar that are folded back on either side of the front opening. There are several different pin types that can be placed on the lapel for a fashionable flair:

 

  • Boutonniere

The most formal of the lapel pins for men, the boutonnière is a floral pin that can be either fashioned from a real flower and pin, or a fabric one – high quality ones often being made from silk. Because of their formality, these are most commonly worn at black tie events, funerals and weddings.

 

  • Long-Stem Pins

The long-stem is a more contemporary fashion pin for the modern gentleman. With an eclectic range of styles, you’ll be able to find something you like for any event. Popular designs are crafted from metallic materials and fashioned into flowers, feathers, animals – the variety is huge. Each will have a long-stem pin to securely attach it to the lapel.

 

  • Badges / Mini Pins

Badge or mini pins can be a fun way to personalize your outfit. Much like cufflinks, they’re available in a range of different designs; you can find anything from precious stone pins, personalized badges to vintage pins.

 

Lapel Pin Placement

 

What Side to Wear Lapel Pin

So where does a lapel pin go on a suit? There’s one uncompromising rule when it comes to pin placement: it must be on the left lapel, slightly under the collar point and north of your pocket square if you’re wearing one. Some suit jackets will have buttonholes made for this purpose, but if yours doesn’t, you can carefully pierce the pin straight through the material.

 

  • Lapel Pin on a Tie

If you’re not wearing a jacket, but are sporting a tie, you can wear a lapel pin on your tie. In this scenario it’s most common to place the lapel pin toward the middle of the tie. However, if you are wearing a jacket, it’s always best practice to place it on the left placket rather than anywhere else.

 

  • Lapel Pin on Dress Shirt

If you’re wearing neither a jacket nor tie you can place the lapel pin on a dress shirt. This can be positioned on the left side of the shirt, near the heart, where the lapel would usually be.

 

  • Lapel Pin on Coat

To showcase your lapel pins on a more regular basis you could place it on coat. For every day wear it’s common to use badges or mini pins as coat pins. Most high quality and more formal coats will feature a buttonhole on the left lapel. If not, you could pin these to the left lapel or even collar to give your outerwear look that element of individuality.

 

  • Lapel Pin Etiquette

One of the ongoing debates is whether the bottom of boutonnière or long-stem pins should be visible or hidden behind the lapel. Although keeping the bottom of the pin concealed is more traditional, it’s becoming increasingly popular to keep the bottom showing for a slightly edgier, cool look – especially if it’s a smaller pin design. There’s no right or wrong way. Try both and see what you feel goes best with your ensemble.

 

Because there’s such a wide range available, choosing a color for your lapel pin can end up being a tough decision. We believe that the color of your lapel pin should complement the rest of your suit rather than clutter it with colors or patterns that match your tie or pocket square. If in doubt, go with a neutral color like off white or grey that compliments most colors.

 

Although you may be a big fan of going all out at events, over accessorizing can be a serious faux-pas. Wearing multiple lapel pins, even if they’re really cool lapel pins, can sometimes look messy unless it’s for a cause like a red poppy. To achieve a sophisticated look it’s often best to be understated.

 

When to Wear a Lapel Pin

Now you know how to wear a lapel pin, it’s good to distinguish appropriate and inappropriate moments to wear lapel pins in which variety of shapes and sizes.

 

Formal Events

More formal events are the ideal opportunity to show off your lapel pins. If you’re wearing a tuxedo to a formal or black tie event the lapels will usually be peaked. This type of lapel is traditionally the most formal and fashion-forward. However, shawl collars are also acceptable. In these cases it is customary to wear the lapel pin on the left lapel which should already have a working buttonhole. Wearing a tuxedo is an occasion for a boutonnière – ideally a real single blossom in preferably red or white.

 

A boutonnière, real or material, can also be worn at a wedding. The most popular and traditional choice of flower is the carnation. A white carnation is the most formal color, but other colors and flowers are becoming increasingly common. Often if they fit into the wedding theme, alternatives such as lavender, roses and sunflowers have been used.

 

Business

In the past it was common for businesses to award employees a lapel pin to symbolize their achievements or show affiliation. Although not as common in modern-day organizations, these types of lapel pins are acceptable every day wear as a suit or coat pin. However, you should use your discretion to determine whether it’s appropriate to wear at an event like a wedding or funeral.

 

Everyday Wear

Perhaps a rose lapel pin might be out of place down at the pub on a Friday night, but that doesn’t mean that other types of lapel pins can’t be everyday wear. Other more subtle pins like a long-stemmed lapel pin could give your suit that extra flair while you’re doing your daily routine at the office. Badges and mini pins can even be worn without a lapel – just attach them to a casual jacket, sweater or duffle coat to give your outfit that extra character and personality.

 

Although lapel pins have their place at more formal events like weddings, if you know how to properly style them, there’s no reason they can’t make more regular appearances. They’re the perfect way to give your outfit that striking flair it needs. With this knowledge of lapel pin etiquette behind you, maybe you’ll find the confidence to sport that new lapel pin at work or on at a dinner date.

 

Tech Arts International Co., Ltd. is a professional Lapel Pin Manufacturer based in Taiwan. The company provides a wide range of hard enamel lapel pin, soft enamel lapel pins, printing lapel pin, promotional lapel pin, logo lapel pins, etc. If you are interested in learning more information about lapel pins, try to check out Tech Arts’s website.

 

 

Article Source: https://www.gloverall.com/blog/how-to-wear-lapel-pin/

How to Choose the Best Anti Glare Screen Protector

Posted on by

When it comes to the transmission of visible light, both glass and sapphire are exceptionally transparent, but the reflectiveness remains one of the biggest problems. Manufacturers use various techniques to scatter reflected light in order to reduce glare, with varying results. The most commonly used technique for displays is called Anti-Reflective coating, or AR coating. It’s based on a thin-film interference principle which is also why soap bubbles produce colorful striations under the sunlight.

 

AR coatings have been around for a while, mostly used for luxury watches and prescription glasses. With more advanced, multi-layer compositions, it most recently made it into handheld devices — Apple Air 2 came pre-equipped with its own AR coating with no visible decrease in contrast and color intensity. It’s by far not a perfect solution, especially when it comes to smartphones. AR coatings come off easily, resulting in a large number of tiny “opaque” scratches and spots which interfere with a user experience. Phone screens are also more prone to scratches and wear than watches or tablets.

 

Screen protectors can help deal with glare issues. There are currently two options: matte finish and AR coating. Both solutions come with some drawbacks which you need to be aware of during your purchasing process. This quick overview will help you choose the Best Anti Glare Protective Film for your specific situation.

 

Anti-Reflective Coating for Tempered Glass Screen Protectors

 

AR coatings are used for tempered glass screen protectors (though not all tempered glass screen protectors come with AR coating). It is hardly noticeable, and colors and contrast look almost the same. As mentioned above, over time, the coating will rub off, or scratch off, and will significantly reduce the anti-reflectiveness. Devices with an AR coating need to be treated with extra care. In case of AR coated tempered glass screen protector, be prepared to get a replacement soon.

 

Matte Finish for Film Screen Protectors

 

The other option is to create a textured surface on the screen (often called a matte finish), which reduces glare and scatters reflections. You may recall that early Apple displays were matte, but to the disappointment of many, no longer are. A matte finish hides fingerprints and smudges better, and since it’s not a coating, it cannot be scratched or rubbed off. This finish, however, has its own drawbacks. Because the texture makes the light waves hit the surface from different angles, you might notice tiny color speckles. Some people love the matte finish, while others don’t — it’s a matter of personal preference.

 

Prochase Enterprise Co., Ltd. is the leading protective films manufacturer in Taiwan. They provide kinds of high quality protective films such as anti glare films, anti fog film, anti scratch film etc. products for clients. If you are looking for the best protective films to protect your screens, please don’t miss the website of PROCHASE, the most excellent products and services won’t let you down. Click here: www.prochase.com to find you need.

 

 

Article Source: http://www.moutfitters.com/blog/how-to-choose-anti-glare-screen-protector/

How to Make Beaded Safety Pin Jewelry

Posted on by

Why Safety Pins Are A Fashion Staple

 

Safety pin jewelry doesn’t sound super sophisticated, but even the high fashion world has embraced the trend. For years, safety pins have cycled in and out of style, which makes them an accessory staple. Fortunately, you don’t have to spend hundreds of dollars on a couture version of the look, nor do you have to go bare bones with safety pins like the punk rockers that sported them in the 1970s and ’80s did.

 

For just a few bucks, you can make your own beaded safety pin jewelry, be it a pair of earrings, a necklace or a bracelet.

 

It’s a fun and easy craft to make and even more fun to wear. With these instructions, you’ll transform an ordinary safety pin into a fashion statement. It’s as simple as slipping some seed beads onto the pins. They make great gifts for tweens and teens or for the adult who’s perpetually young at heart.

 

The Supply List

The supply list for safety pin jewelry is pretty simple. In addition to the pins and the beads, it is helpful to have needle-nose pliers and a small flat-head screwdriver. You can find all of these items at a chain craft store like Michael’s. Art supply stores also carry these goods.

 

How Many Safety Pins Do You Need?

How many safety pins you’ll need depends not only on the pattern you choose but also on the kind of jewelry you want to make. The typical safety pin jewelry project will require between 10 and 14 small pins.

 

From there, you can open the pin, and slip the seed beads onto it. Once all beads are in place, close the safety pin. You may want to use the needle-nose pliers to pinch the end of the safety pin so it will not pop open later. Repeat this step until all the safety pins are beaded.

 

Connecting the Small Pins to One Big Pin

Now you are ready to put all the beaded pins onto a larger safety pin.

 

 

Open the large safety pin (the size you need that will be stated in the pattern you choose). Use the flat-head screwdriver to slightly pry apart the coils at the end of the large pin.

 

Slip the loop of the first beaded safety pin onto the large one. Pull it down to the loop at the base of the large pin. Pull it around the loop and up through the backside of the pin. Repeat this for each beaded safety pin.

 

Once all your beaded safety pins are on your larger pin, use the pliers and squeeze the loop to close it. You can now affix your new safety pin jewelry to your shirt, hat, shoelaces, etc.

 

Shuen Fuh Enterprise Co., Ltd. provides kinds of safety pins for customers. Their factory is equipped with the state-of-the-art equipment to develop and manufacture high quality safety pin products in assorted sizes, styles, and shapes for your applications. If you are interested in learning more information about safety pins, welcome to visit Shuen Fuh’s website to browse more relative products.

 

 

Article Source: https://www.thespruce.com/beaded-safety-pin-instructions-1243897

How Do I Choose the Best Luggage Strap?

Posted on by

Many Advantages Are Brought By Using Quality Luggage Strap.

 

A luggage strap is a good way to identify your bag when it comes through baggage claim, as well as a good way to ensure it stays closed. These are typically very inexpensive, and are sometimes even given out by travel companies for free when an individual books a trip. The best luggage straps are made of durable materials such as nylon, with a sturdy clasp. Choosing a luggage strap in a bright, easily identifiable color is a good idea as well, to make it easier to spot. Of course, it is also important that the strap is adjustable to fit around different sizes of suitcases.

 

Airline regulations generally forbid locking luggage, so it is important that the luggage strap is removable without a key if necessary. It is important to select a strap that has a sturdy clasp, however, that cannot be easily pulled apart to ensure it does not break when it is handled. Luggage is often handled pretty roughly, particularly when it is taken on and off a plane, so be sure to choose a luggage strap that is also made of durable materials. Nylon materials, similar to those used on soft suitcases, are some of the best choices because they are easy to wrap around a bag, but will not snap in half if stretched.

 

The color of the luggage strap is an important choice as well. Muted colors may be more stylish and may match the luggage better, but bright neon colors can make your bag much more distinguishable from all the other ones coming through the baggage claim area. In addition to color, you may be able to get a personalized or monogrammed luggage strap for an extra fee. This too can make it more noticeable and less likely that someone will pick up your bag by mistake. Regardless, it is still important to attach identifying information to your bag in case it becomes lost.

 

Unless luggage straps come specifically with your suitcases, you will want to be sure to purchase adjustable luggage straps. These allow you to place them on any bag, including oddly shaped bags such as duffel bags, and simply lengthen or shorten them as needed. Some adjustable luggage straps may also be used as a carrying handle, which can make the strap even more beneficial, particularly if the bag is a large or awkward size. Finally, keep in mind that if a travel company provides a free adjustable luggage strap as part of a group trip, they may have a specific purpose in doing so, such as recognizing trip participants, so be sure to use it.

 

TAY YOUNG is the manufacturer of specializing in providing various luggage straps. All of their luggage straps are a complete combine with high quality and excellent material. If you need more information about luggage straps, welcome to contact with Tay Young, they can supply satisfy customers require luggage straps size, material, color and logo available.

Tay Young Contact Information

 

Article Source: http://www.wisegeek.com/how-do-i-choose-the-best-luggage-strap.htm

Taiwan UAV Manufacturing Specialist – Carbon-Based Technology Inc.

Posted on by

Proved Core Values of Unmanned Systems in Fields of Anti-Disaster and Geographic Spatial Application.

 

UAVs Companies?

 

Carbon-Based Technology Inc. was established in March 2007 and devoted in complete system design, integration, manufacturing, and global marketing of Unmanned Aircraft System.

 

Carbon-Based Technology not only can offer high reliability Unmanned System as a platform for “Intelligence Gathering”, but also can offer total solutions for various aspects. Through this Hi-tech and Hi-reliability UAS platform which is 100% researched & developed in-house, it can integrate with techniques of data processing and analyzing for relative study fields such as GIS and Remote Sensing, Team Carbon-based can offer clients with totally intact and useful intelligence on the ground as well as in the air. Especially for fields of anti-disaster and geographic spatial application, they have assisted clients from various professions to acquire priceless feedbacks. This also has proved core values of Unmanned Systems of Carbon-Based Technology!

 

Below, I am going to introduce one of products in Carbon-Based UAVs to you – Real Time Surveillance.
Avian-S
Real-time Surveillance

Real-time Surveillance

Avian-S Real-time Surveillance

Avian-S unmanned aerial systems featuring the advantages of long endurance, hi-stability, turn-key operation, and payloads that are plug-and-play modular designed. Any individual with less or even no aviation experience can easily accomplish any mission.

 

Avian is an Unmanned Aircraft System (UAS) featuring compact design, multi-purpose, and modularized payloads which are interchangeable on-site according to the mission requirements.

 

If you are interested in learning further details about real time surveillance, welcome to check out product pages of Carbon-Based. And feel free to send inquiry or contact with them for more information.

 

Watch Video Below for More Details!

—————————————————————————————————————–

Carbon-Based Technology Inc.

Carbon-Based Technology Inc.

3F, No.30, Keya Road, Daya District, Taichung City, 42881 Taiwan

Tel: +886-4-2565-8558

Fax: +866-4-2565-8559

E-mail: info@uaver.com

Permanent Cosmetics and Permanent Makeup Accessories – Introduction to the Celebrities Choice

Posted on by

Face it, celebrities are icons. They are people that look flawless all of the time. They always have the right accessories, beautiful faces and their makeup is perfectly applied. Do you know the reason for that? Permanent cosmetics and quality permanent makeup accessories. This has been a secret to the stars for years and as of late, it has become an increasingly popular choice for average people looking for a way to look like their favorite celebrities!

 

You may have heard of permanent cosmetics before but do you really understand exactly what the procedure entails? That is what we are going to discuss next. Cosmetic tattooing is another name for cosmetics that are permanent and it does involve tattooing. It involves playing ink under the first few layers of skin in order to make things like eyeliner, lip liner or even eyebrows permanent, so you no longer have to use eye pencils, eyebrow pencils or liner for your lips. This in turn will save you quite a bit of money.

 

Whenever you choose to get permanent cosmetics and permanent makeup accessories, you certainly want to find a technician that is certified and you want someone that knows exactly what they are doing before you commit. Why would someone get a treatment like this? Well, it saves time, money and you will actually look more youthful and beautiful by the time the treatment is over! It is the ideal solution for someone that is looking to stay young and for someone that wants to stop wasting their money on makeup that never looks completely flawless.

 

Bella Co., Ltd. is the company of specializing in supplying high quality permanent makeup devices and permanent makeup accessories. If you are interested in learning more tips of beauty, please don’t hesitate to visit Bella’s website to find something suitable for you.

 

Article Source: http://EzineArticles.com/5168870

How to Use Metal Eyelets?

Posted on by

Sometimes you see projects and they just don’t look finished. They are probably fine the way they are, but a little dressing up never hurt anything, right? One of the ways you can dress up plain punched holes is with eyelets. They aren’t hard to use when you know how, so here are a few tips to get you started!

 

There are several sizes of scrapbooking eyelets, such as 1/8″ and 3/16″. This size refers to the hole in the center of the eyelet, not the outside diameter of the design. They come in all shapes and sizes, similar to scrapbooking brads.

 

One question I get asked a lot is, “are these for use on cloth or clothing?” Certainly we all see metal eyelets all the time on curtains, hats, belts, and on shoes & hoodies where the strings go through. Generally, these are a sturdier type of eyelet than scrapbooking eyelets and they have to be attached with a special setter that can go through thick materials. So while you might be able to use scrapbooking eyelets on cloth, they probably won’t stand up well to the harsh environment of wear and washing for very long.

 

Scrapbooking eyelets are usually a weaker metal than clothing eyelets and can easily be attached with a simple metal setter and a craft hammer. There are even eyelets that can be set with a ball point pen tip. They are called Quicklets and are made by Eyelet Outlet. The metal is very soft and is scored so that the back flattens easily when pushed on firmly with a pen tip.

 

Depending on your budget, there are several types of eyelet setters available on the market. There are silent setters which are a spring-loaded type of setter, the crop-a-dile, a squeeze type of tool, but most common and economical is the eyelet setter tool. An eyelet setter is a metal took about 5″ long with a special tip that fits into the hole on the back of the eyelet.

 

To set a metal eyelet, simply make a small hole in your paper and place the eyelet through the hole. Then turn the paper & eyelet over onto a firm surface. Place the tip of the setter into the hole, Give the top of it a firm whack or two with a craft hammer. That’s it! The back of the eyelet will splay out holding the eyelet in place. If you need a neat appearance on the backside of your project, consider buying finishing washers or rivets. They are placed on the back of the eyelet before setting it.

 

Metal eyelets are often used for lacing ribbons just like on clothing. They make a great embellishment for the top of a tag and also work well for joining several pieces of paper together. They’re a great staple for any paper crafter’s supply closet, so hope you give them a whirl today!

 

Dyi Er Kang Enterprise Co., Ltd. is specializing in designing & producing all kinds of plastic accessories, metal accessory plastic snaps & buckles. If you are interested in learning more information about metal eyelet or other garment accessories, welcome to browse our website or contact with Dyi Er Kang directly!

 

 

Article Source: http://EzineArticles.com/5869445

Product Introduction: About PROCHASE’s Anti Static Film

Posted on by

Anti static film is a packaging material with property to disperse static electricity. Static electricity is accumulated on the surface of objects as a result of friction one over another. Extraordinary properties of the film enable to protect statics sensible objects from negative impact of the parasitic electromagnetic fields during continuous storage or transporting.

 

This film can be applied for protection products against dust and small debris, that obligatory will be attracted to other types of materials under the impact of static electricity.

 

Prochase provides FAP-8611-J model anti static PET protective film for customers. Our anti static films which coated anti-static adhesive onto PET film surface under clean room, there is anti-static effects in adhesive. Due to low adhesion, therefore it can be laminated with plain and smooth substrates, more further its appears will be no residue when you peel off and no static occurred.

 

Application:

Glass penal, LCD screens, protection of electronic products, protection of optical film, protect dust contamination or adsorption under manufacturing processing.

 

Prochase is the leading manufacturer of protective films in Taiwan. A variety of protective films such as anti static film, anti fingerprint film, anti fog film, anti glare films etc products can be found on our website. If you are interested in anti static film series products, welcome to visit our website and feel free to contact Prochase.

 

Prochase Enterprise Co., Ltd.

No.33, Yonglong Rd., Dali Dist., Taichung City 412, Taiwan.

TEL: 886-4-24066838

FAX: 886-4-24065180

E-mail: prochase@ms36.hinet.net

 

 

Article Source: http://plastmodern.com.ua/en/portfolio-view/anti-static-film/

Embroidery vs Printing: Choosing the Better Option

Posted on by

Promotional items are meant to advertise your company and its products. That means when you give away freebies like umbrellas and T-shirts, they must be branded with an unobtrusive yet attractive company logo.

 

Most companies choose to print their logo on promotional garments. Printing is cost-effective, fast, and cheap but there are so many different printing techniques used for apparel printing. Almost all of them suit different business strategies but not everyone knows about them in detail. We’ve listed a few of the more commonly used apparel printing techniques used nowadays that you should know about before you choose.

 

  • Screen printing – This is the most commonly used method of apparel printing. Inks and mesh screens are used to burn or expose an image on to cloth. The entire printing process is simple and easy and the same screen can be used multiple times to create several designs and images.

 

  • Vinyl printing – Heat transfer vinyl printing is the best option for printing lettering on T-shirts and small objects. A special vinyl cutter machine is required to cut out images from a vinyl sheet. The heated vinyl is then pressed on to the fabric to bond it on to the material. This process is labor-intensive and quite slow. Moreover, color selection is limited and inks are expensive.

 

  • Digital printing – Direct to garment digital printing or DTG printing is printing directly on to clothing using special inkjet printers. Textile inks are used and the clothing material absorbs the inks to create a unique design. The process is quick, easy, and images are clear with sharp borders and bright colors. However, the machine and its inks are expensive and small orders may turn out to be pricey.

 

  • Sublimation printing – This process involves transferring heat on to polyester apparel items. The process uses a special heated gaseous ink to open pores on the polyester material and create an image. This process can also be used to print on non-textile polyester items like mugs, key chains, mouse pads, and puzzles. The process is restricted to white or light colored polyester items. It is expensive but durable, and creates an attractive stable image.

 

As you can see, there are several more types of apparel printing you can choose from but most of them are too expensive for bulk printing.

 

Apart from printing, companies do choose embroidery to create their logos on promotional items. The process is simple as an embroidery digitizer creates the design and then the design can be stitched over and over again on an embroidery machine as many times as you need. The embroidery digitizing process is a very important stage to get good quality, outstanding looking designs. The machine can create a range of beautiful effects like appliqué, 3-D effects, shading and depth on your logo.

 

Embroidery vs Printing

 

Printing is a cheaper option than embroidery. Screen printing is the cheapest option. However, this should not restrict your choices, because embroidery is a long term option. Embroidery is definitely more durable and wash-worth.

 

In fact, you can choose to mix printing techniques and embroidery to create a unique promotional garment such as sublimation transfers printing embroidery. With embroidery, you can incorporate different types of appliques, 3d embroidery, embroidered badges and so much more.

 

The bottom line is that as a businessperson, you want to create promotional garments that combine quality and effectiveness with price. Yes, printing is cheaper but embroidery creates a unique 3-D effect that remains in place even after multiple washes.

 

So make a decision to showcase your business using elegantly embroidered promotional garments, welcome to get in touch with Dah Jeng Embroidery – not only providing high quality embroidered patches but also provide direct embroidery and sublimation transfers printing service. With more than 30 years’ experiences, Dah Jeng Embroidery is always the best embroidery suppliers for you.

 

Article Source: http://EzineArticles.com/expert/Rishi_S_Shah/1966922

Article Source: http://EzineArticles.com/8892848