How A Manual Chain Hoist Works?

Posted on April 30, 2018 by Camille F.

From What Parts A Manual Chain Hoist Consists

Manual chain hoist is a pretty simple device considering the large amount of weight such a tool can lift. Chain hoists are made from durable, high grade steel to ensure safety and reliability when lifting couple of tons heavy loads. Manual chain hoist can be separated in three different part categories: lifting chains, lifting mechanism and hooks.

Chain hoist has got two chain loops – hand chain and lifting chain. Hand chain sits on a wheel located in the lifting mechanism; it needs to be pulled by hand in order to lift a load. The wheel inside the lifting mechanism has got special pockets that allow the hand chain to move the wheel. Lifting chain also loops the lifting mechanism and lifts or lowers a load. At the end of the chain there is a grab hook, where you can attach lifting chains or slings, a load leveler or load itself. There is also a hook on the top of the chain hoists housing. This hook is used to attach the hoist to a ceiling mount, trolley system or other construction that can withstand the weight a hoist will lift. Most chain hoists have swivel hooks, meaning that they can be turned 360 degrees around to allow for easier mounting. The lifting mechanism consists of a cog, axle, drive shaft, gears and sprockets. There is also a chain stopper or brake on most chain hoists that prevents load from lowering under a load.

How A Manual Chain Hoist Works

The physics behind a chain hoist are very simple and have been used for lifting heavy objects for a long time. Chain hoist uses a mechanical advantage to transform small force over a long distance to large force over a short distance; this is possible by using multiple larger and smaller gears in the chain hoist mechanism.

To lift a load, chain hoist operator needs to pull down the hand chain; this turns the cog and axle which goes through the lifting mechanism. Inside the lifting mechanism are multiple gears which increase the mechanical work applied when pulling the hand chain for dozen times using gear ratio, allowing to easily lift loads with multiple ton capacity.

So when the hand chain is pulled, the cog which is rotated by the hand chain turns the drive shaft and gears which turn the load chain sprocket, this also rotates the load chain that is looped over the load chain sprocket and lifts a load. Larger gears move slower than smaller gears, but create more force; this is why chain hoist lifts load very slowly when compared to a hydraulic hoist. At the end of the lifting chain is a grab hook, which allows easily attaching and detaching a load. Also, most chain hoist lifting mechanisms have a ratchet or braking system that prevents the load from slipping back, but allows lowering a load by pulling the other side of the hand chain.

Manual Chain Hoist In Comparison With Other Hoist Types for Engine Lift

Chain hoists have different uses, for example in construction sites, shops, warehouses, also in car service stations and other application, where precise lifting is required.

The Disadvantages Of Manual Chain Hoists For Engine Lifting Are:

They are slower than other type of hoists;
They have special requirements for installation areas, which limit places these hoists can be used, in opposite hydraulic hoists just need a solid and level ground.

However, There Are Also Some Advantages For Using Manual Chain Hoists For Engine Lifting:

They don’t need electricity, oil or other additional resources to work;
They are cheaper than electric or hydraulic hoists;
They are simple to use and easy to repair and maintain.

If you need more information about manual chain hoists, try to visit Cheng Day Machinery Works Co., Ltd. – the company specializes in producing wire rope hoist, electric chain hoist, crane components, chain hoist trolley, etc. Get more details please send inquiry or contact with Cheng Day Machinery.

Article Source: http://www.knockoutengine.com/how-a-manual-chain-hoist-works/

Advantages and Disadvantages of VNA Trucks Design

Posted on January 12, 2018 by Camille F.

Determining the ideal aisle width for your application means you need to look at a lot of factors. Is Very Narrow Aisle, or VNA, right for your warehouse? In this article, I am going to go over the advantages and disadvantages of VNA truck design, and when you would use it.

First of all, Very Narrow Aisle is defined as less than 6 feet between the racks, and is usually used with selective pallet rack. Often, guidance systems like guide rail or wire is used to keep the trucks on track. The main component that decides your aisle width is your lift truck. If you are doing VNA, you will need a special forklift to navigate the aisles, you can’t use a standard forklift. VNA trucks (turret trucks) usually only turn the load instead of the whole vehicle, and isn’t dock working trucks.

Will VNA Trucks Work For You?

Advantages:

Improves space, you can store 40%-50% more inventory
Good for applications with less than pallet storage
High productivity in full pallet retrieval

Disadvantages:

Requires a certain lift truck which is more expensive
Two vehicles cannot pass at the same time
Lower flexibility, you usually have to store the same SKU
Requires a “hand-off” of inventory from the VNA forklift to a dock working forklift on outbound, and the opposite for inbound

If the pros outweigh the cons, then utilizing Very Narrow Aisle would be beneficial to your warehouse.

Need more VNA Trucks information, try to visit the well-known forklift truck manufacturer – Tailift Material Handling Taiwan Co., Ltd. The company provides kinds of material handling equipment, including counterbalance trucks, electric pallet truck, electric towing tractor, VNA trucks, and much more electric forklift trucks. For further details, please check Tailift product pages and send inquiry to them.

Article Source: https://www.steinservicesupply.com/blog/advantages-and-disadvantages-of-vna-design

Forklift Truck Safety Training is Critical

Posted on August 16, 2017 by Camille F.

Forklift Trucks are commonplace around construction sites, warehouses and factories. But these powered industrial trucks can be deadly if used improperly, and they require respect and diligence for safe operation.

About 35,000 serious injuries and 62,000 non-serious injuries involving forklifts occur every year in the United States, according to the Washington State Department of Labor & Industries. Forklift operators at heightened risk of injury or death include those who:

Have not been trained in the principles of physics that allow forklifts to lift heavy loads
Are unfamiliar with how a particular forklift works
Operate a forklift carelessly
Use a forklift despite the machine having missing parts or unapproved alterations

Forklifts may be powered by batteries, gasoline, diesel or propane, and come in multiple sizes. Some forklifts have drawbars so they can pull weighty loads, and others have booms and attachments that allow them to lift heavy objects.

Regardless of the type of forklift, one thing holds true: All forklift operators must be trained. “An untrained forklift operator can be as dangerous as an unlicensed driver of a motor vehicle,” Washington L&I states, adding that “state regulations require the employer to ensure that a forklift operator is competent to operate the forklift he or she is assigned to use.”

Follow The Rules

Drivers must know and adhere to all safety rules when operating a forklift. One critical rule operators should never forget? Always wear your seat belt. Failure to do so can result in an operator being thrown outside a forklift’s protective cage in the event the truck overturns.

To help prevent a forklift from tipping over, falling to its side or dropping its load, Washington L&I recommends a number of tips:

Ensure a load is completely stable and safely secured on the forks before operating the forklift.
Keep loads low to the ground when traveling.
Keep a load uphill when moving up or down an incline.
Drive slowly when conditions are wet or slippery.
Slow down when making turns and honk the horn if traffic is encountered.
Never allow unauthorized workers to ride on a forklift, and refrain from engaging in horseplay when operating one.

Learn more information on how to safely operate a forklift, including how a forklift works, a pre-use inspection checklist, and rules for loading and unloading to have a safe working environment.

Article Source: http://www.safetyandhealthmagazine.com/articles/15812-forklift-safety-training-is-critical

Protect Your Diesel Forklift Trucks from ‘Bad’ Fuel

Posted on May 22, 2017 by Camille F.

Tackling chemical effects, water and microbes

Diesel is one of the materials handling industry’s most basic requirements, but like other fuels it deteriorates with age. Chemical degradation, contamination with water and infestation with microbes can turn it into an unhealthy cocktail that damages your forklift trucks and your operation.

At best, ‘bad’ diesel reduces the efficiency of your lift trucks’ performance. At worst, it causes serious and expensive damage. If you think you can avoid this by buying only ‘good’ diesel, you are mistaken. The changes that turn good diesel bad usually take place on your own premises.

Suppliers of diesel in the EU and other economically developed regions are governed by rules on its quality, content and storage, so you can expect it to reach you in good condition. Always buying from a supplier with a good reputation lessens the risk of careless handling and storage in the supply chain from the refinery to your business. The differences between brands of diesel tend to be in the mix of additives used.

The problems

Even under the best conditions, chemical activity will eventually change the nature of stored diesel. The products of that chemistry include solid materials which form a slimy layer on surfaces and sludge at the bottom of tanks. Water is bad news for engines on its own, but it also encourages microbial growth which speeds up the chemical degradation.

Let’s look at each of those interacting factors in turn to see where they come from and what effect they have. As soon as diesel is exposed to air it reacts chemically. This starts off chain reactions that result in more and more undesirable molecules and solid breakdown products. As well as causing blockages, these substances are often corrosive. If you store diesel, they can become a problem within a few months – and even sooner if water and microbes increase their production.

Diesel can become ‘wet’ through leaks in storage tanks and absorption from a moist atmosphere. Water in diesel is directly damaging to some engine components and it interferes with fuel combustion. It also reduces the fuel’s lubricating effect, exposing engines to excess wear and damage. In a metal storage tank, water can lead to corrosion and further contamination. In addition, the presence of water helps microbes to thrive.

Diesel is an organic substance which can be used as food by a variety of bacteria, fungi and yeasts. Arriving via the air, in moisture or from a contaminated supply, these microbes can multiply hugely. Their acidic by-products, along with the slime created by their own biomass and by breakdown of the fuel, can be highly damaging. They form a layer or biofilm on surfaces, often collecting in pits and crevices where their corrosive effect becomes even more concentrated.

Slime and sludge produced by these factors blocks filters and fuel lines, while the acids affect engines, fuel systems, storage tanks and any other vulnerable surfaces coming into contact with them. Combustion efficiency decreases, engine life is shortened and bills for replacing components become more frequent. Once microbes have infected a diesel forklift truck they are very difficult to eradicate.

For completeness, it should be mentioned that other materials can contaminate fuel. Abrasive particles of rust, dirt and sand are particularly to be avoided in engines.

Before discussing solutions to diesel problems, it is worth noting that the composition of this fuel has changed over the years and is likely to continue changing.

Regulations on reduction of sulphur, to clean up exhaust emissions, have led to the use of ultra-low sulphur diesel (ULSD). Sulphur increases the lubricant properties of diesel, so engines using ULSD may wear more quickly.

Throughout Europe, biodiesel (biologically produced diesel) is now blended with the fuel to improve lubrication. Unfortunately biodiesel breaks down more quickly, absorbs more water and is more hospitable to microbes. With biodiesel, even greater care must be taken to protect the fuel from contamination.

The solutions

The first steps toward avoiding diesel quality problems are to buy it from a reputable supplier, as already mentioned, and to store it in suitable, well-maintained tanks. Regulations on storage of diesel vary a little between countries in Europe and mainly concern the potential environmental impact of leaks reaching water bodies and other natural habitats. For diesel users, avoiding the loss of expensive fuel should be a strong enough incentive to ensure vigilance against leakage.

Safety legislation is stricter for petrol than for diesel, but it must always be remembered that all fuels are flammable. Keeping storage tanks away from sources of heat is essential, and a cool environment also helps in maintaining the diesel’s condition.

Some people may believe that the fuel filter in their diesel forklift truck’s engine will remove any contamination. This is unlikely. The fuel you put into the truck must be kept clean and in good condition within the storage tank. If diesel is stored at a low temperature, and certainly below 70 ºF (21 ºC), and care is taken to avoid contamination, it should last for a few months. To extend its life further, fuel stabilisers, biocides and other treatments may be needed.

A storage tank should be regularly checked for any defects that could let diesel leak out or water leak in, while openings should be water-tight and caps should be secured. The space between the fuel and the top of the tank is filled with air, which can be a source of moisture. Ideally that space should be kept to a minimum, allowing only enough for expansion of the fuel. This is another good reason for topping up frequently with fresh diesel from the supplier rather than storing large amounts.

A variety of fuel stabilisers can be bought for use if diesel has to be stored for relatively long periods. Regular, routine testing of stored fuel for water and microbial contamination is a sensible precaution. Simple-to-use test kits are available for this. The sooner these problems are detected, the easier and less costly they are to tackle.

If fuel is heavily contaminated by microbes, a large dose of biocide can be used to kill them. The dead bodies of the microbes, along with the solid material they have helped to create, need to be filtered out before the fuel is fit to use. Killing all of the microbes is difficult when they are living deep within slime and sludge, so biocide treatment will not work unless the storage tank is thoroughly cleaned.

Simple measures to reduce contamination risks include using a filter whenever moving fuel from one storage vessel to another, or into the tank of a forklift truck, and always doing this in a dry, dirt-free place. At the other end of the scale, for operations that really do require long-term storage of diesel in large quantities, there are specialists who can supply automatic systems for cleaning and removal of solids, water and microbes. Having invested heavily in your diesel forklift trucks and your business, it makes absolute sense to protect them.

Tailift is the professional manufacturer of producing diesel forklift trucks. If you are interested in learning more information about forklift truck series, welcome to visit Tailift website to see what products we can offer you!

Article Source: http://eurekapub.eu/fleet-management/2015/04/14/protect-your-forklift-trucks-from-bad-diesel-fuel

Employing Lifting Magnets for Material Handling Operations

Posted on May 5, 2017 by Camille F.

Magnetic lifters are a lightweight and cost-effective way of transporting heavy materials in situations where another method of material handling would be difficult, dangerous, or expensive.

These lifters use magnets to hold heavy materials securely without requiring clamps, slings and other holding equipment. They are most beneficial in situations in which another method of material handling would be difficult, dangerous, or expensive.

Lifting magnets vary widely in size. Usually, the larger ones are hung from a chain on a crane that is able to move the lifting magnet into the location necessary to retrieve the material. This type of lifter can be used for a wide variety of purposes, including automobile junking, construction, and demolition and cleanup.

How Lifting Magnets Work

There are two types of lifting magnets: permanent magnets and electromagnets. Permanent magnets use permanently magnetized material to create a magnetic field. They can be used to lift loads up to 2,200 pounds. These lifters can be moved easily to various work locations. However, one disadvantage of permanent magnets is that they have a restricted lifting capacity. If a variable lifting capacity is required, the optimum choice is the electromagnetic lifter.

Electromagnetic lifters use an energized electrical coil wound around a steel core to orient magnetic domains within ferrous materials in a common direction, thus, creating a magnetic field. Unlike permanent magnets, electromagnets require a constant DC power source. Hence, a power failure can be a safety issue with electromagnets unless an emergency power or backup supply is integrated with this type of lifting system.

Permanent magnets are favored (1) when electricity is not available, (2) when power failures are a common occurrence, or (3) when adjustable magnetic force is not necessary. Electromagnets are the choice for applications where varying strength or remote magnet control is required.

Suitable Applications for Lifting Magnets

Smooth, Flat Surfaces: Permanent lifting magnets are manually operated. They create a very strong but low magnetic field so they are sensitive to air gaps between the magnet and the load. When an air gap increases, the magnetic force will be significantly reduced. They work best on smooth, flat surfaces rather than rough and irregular ones.

Type of Material: While ferromagnetic materials are inherently magnetize-able, paramagnetic materials, such as aluminum and magnesium are not. (Diamagnetic materials, such as copper, lead, and silver, do not magnetize.) For materials other than iron-based materials, a reduction factor must be calculated to determine the effective holding force.

Thickness of Material: The thickness of the material to be lifted also plays a role factor in selecting a lifting magnet. Thick materials are the best candidates. Materials thinner than the specification for the lifting magnet will have a much lower level of holding force.

Benefits

Lifting magnets save time by reducing and sometimes eliminating blocking and slinging. They can also eliminate or decrease waste. They reduce product damage commonly caused by chains, hooks, and other mechanical grabs. But the significant advantages of lifting magnets are ease of operation and cost-effectiveness.

Earth-Chain Enterprise Co., Ltd. is a professional manufacturer of specializing in lifting magnet, magnetic precision tools, magnetic clamping block, and etc. magnetic tools. If you are interested in learning further details about our lifting magnet series, welcome to browse Earth-Chain’s website or contact with us directly!

Article Source: http://EzineArticles.com/6074964

The Importance of Having a Reach Truck or Forklift

Posted on May 2, 2017 by Camille F.

A lifting truck is very much like a forklift, but there is a small difference. This kind of vehicle is like a small forklift, designed for small aisles. They are usually electric powered and are named reach trucks because the forks extend to reach a load. Having a lifting truck in your warehouse or facility can increase your work efficiency and overall warehouse performance. Apart from this, there are many more other benefits you should consider when purchasing a lifting machine. I recommend you speak to a dealer or manufacturer about the benefits a reach truck can add to your business. One of the many benefits of owning an electric powered lift vehicle is that it costs way less to maintain than other types of forklifts. This is because they do not contain as many moving parts and do not need any type of fuel. They cost less to operate on per hour compared to a diesel or petrol powered forklift.

However, not everyone can afford to buy all the machinery and equipment they would need to run business. Not every business is as successful. Luckily, there are things like truck hiring companies. Truck hiring companies enable smaller businesses that use heavy machinery and equipment like reach trucks. Reach truck hire have become extremely popular and small businesses find this type of service very helpful. Companies that might only use reach trucks every now and then for small, irregular projects also find reach truck hire companies useful.

One distinctive difference between regular forklifts and reach trucks is that reach truck has the ability to lift pallets in a vertical fashion. This is especially helpful if you have a warehouse that utilizes high storage racks that might be difficult to reach.

Forklifts and lifting trucks are used for a number of different reasons, as we know. They are a critical element to warehouses and distribution centers, so much so that the warehouse efficiency and overall performance of the business would be noticeably decreased if without one. Obviously, like with most vehicles and heavy machinery, a forklift or lift truck driver would need to have a license to be able to operate these machines. Often times, drivers of these machines will have to be guided into the warehouse or factory through guide rails laid out on the floor.

Forklifts, lifting trucks and any other type heavy machinery often come with a nameplate that indicates, amongst others, the weight the machines are able to handle: normally between one and five tons. Larger machines that have up to fifty ton loading capacity are used to load larger objects, like shipping containers. The information located on the nameplate is extremely important and should never be ignored or removed: loads must not exceed these limits, as it can be extremely dangerous. In many jurisdictions, it is illegal to remove or tamper with the nameplate without permission from the machine’s manufacturer.

Forklifts and lift trucks are essential equipment in some industries. If you are interested in learning more information about reach truck, welcome to browse the website of Global Power Co., Ltd. The company has been a specialist for the world’s brand of lift trucks from China. The models of CT POWER forklift truck are compact and have obtained the certification of CE and ISO 9000, which have so far won good reputation among customers from Europe, Middle East, U.S A., Canada, Southeast Asia, etc.

Article Source: http://EzineArticles.com/5942500

3 Major Types of Material Handling Equipment

Posted on March 29, 2017 by Camille F.

The process of moving the heavy goods around the warehouse is only possible with the right material handling equipment. This can include items like storage units, forklift trucks and tools that take an active part in the process of moving supplies in and out of the warehouse. Here are some of the major types of material handling equipment:

Storage equipment

Storage equipment relates to the racks, shelves, pallets or mezzanines that are used when goods are in temporary storage and waiting to be transported to an ongoing destination. A great benefit of using the purpose made pallets or racks is the ease in which they can be stacked to minimize the usable footprint. Many of the large warehouses rely on the proprietary packaging system to increase the ability to store a high volume of goods while conserving space. By creating the bespoke storage equipment it is possible to size them to match the exact dimension of goods that are normally handled.

Engineered systems

The engineered systems include a variety of automated tools that improve the ability to move heavier loads around the warehouse floor. One of the most popular engineered systems is the fully automatic storage and retrieval system. This type of system involves an automated structure that consists of shelves, aisles and racks that is controlled via a shuttle system. The actual shuttle system is a type of cherry picker and is operated via a fully automatic system or by a worker. This is a very fast and efficient method to locate and retrieve items in a large warehouse. Other similar equipment includes the automatic guided vehicles, robotic delivery systems and conveyor systems.

Industrial Trucks

The industrial trucks are essential tools used to move the heavy products and materials in and around the warehouse floor. This type of equipment can vary quite significantly and include several types of forklift trucks, pallet-jacks and hand-operated trucks. The trucks differ in size and function to make it possible to easily move the different types of loads. A common method for lifting items is a flat surface or forks like on a forklift truck. The operation of the forklift truck can also vary. For instance, there are trucks that have a person to manually operate the control, while other systems are more automated. Additionally, the trucks include the stack or non-stack design, with the non-stack unit solely used to transport goods and unable to help with loading.

Global Power Co., Ltd. is the professional and experienced manufacturer of specializing in forklift truck series. The models of CT POWER forklift truck are compact and have obtained the certification of CE and ISO 9000, which have so far won good reputation among customers from Europe, Middle East, U.S A., Canada, Southeast Asia, etc. Learn more information about forklift trucks, welcome to visit our website or contact with Global Power directly!

Article Source: http://EzineArticles.com/9461458

Electric Towing Tractors Exhibit Glamorous Look and Deliver Quality Performance

Posted on February 17, 2017 by Camille F.

Tow tractors and electric stackers offer extensive usability in industrial sectors. The main difference between traditional and modern engineering equipment is that the modern items are more developed and can deliver better performance at faster pace. The market of electric stacker and electric towing tractor is very competitive and that is why manufacturers of such items keep the prices at reasonable level.

Electric stackers come in different designs. Their price range varies in accordance with the sophistication of their configuration. Of the top-notch stackers, pallet movers are supplied along with powered drive and lift. As far as carrying loads is concerned, electric stackers are empowered with enhanced capacity. The lift that is attached with it is tall in height and measures 840mm. Some of their breeds are specifically manufactured for moving pallets. In such cases, electric stackers are so designed that they can lift up variants of pallets.

They are fitted with cramped and narrow aisles to maneuver pallet loads. These intricately designed items are armed with many advanced features. One of the prominent features of electric stackers is that users can not only lift up items but also have infinite control over lifting with the help of smooth hand controlled powered system. This system facilitates the smooth functioning of the machine. These electric stackers are heavy weighted items. Adding to its popularity is the addition of compact and new features.

Electric towing tractors are an outcome of constant efforts on part of the manufacturers to devise new ideas and develop them into newest models. They have found users at different work places. Warehouses, factories, laboratories, hospitals are some of the places where they are extensively used. They have long life span as they are powered by traction battery of high capacity. They are capable of standing wear and tear of time. To operate this high-tech machinery, one needs to hook up the tow hitch to the required trailer. There is no problem in working with these bulky items in a tight area.

Electric towing tractors are capable of moving in upward and backward directions with control over their speedy movement. The inclusion of advanced breaking system lends the items complete look.

From the aforesaid overview of both of the items, it has become quite evident that they are capable of outsmarting their peers in every aspect of performance. Electric stackers as well as tow tractors have earned much appreciation among users due to their high-end performance. The fact that they can be used for a prolonged time period has also made a strong appeal among the users. The last but not the least is the glossy looks of electric stackers and tow tractors.

Established in 1973, Tailift is an expert of specializing in research and development of material handling equipment. Our forklift trucks are sold to more than 50 countries around the world, and enjoy the considerable success in several markets. Tailift manufactures serial types of materials handling machines include ICE counterbalance trucks, electric counterbalance trucks, pallet trucks, stacker, reach truck, tow tractors and VNA trucks. If you need more information about electric towing tractor and more forklifts series, welcome to visit our website and feel free to contact with Tailift.

Article Source: http://EzineArticles.com/3667394

What is The Different ‘Types’ of Forklift Truck?

Posted on January 13, 2017 by Camille F.

Whether you have considered what are the different types of forklift truck, and what do they do? If you don’t quite understand the differences between forklift trucks, read on below as we talk you through the major forklift truck types, along with their primary uses.

Counterbalance Forklift Trucks

Counterbalance forklift trucks are the most common type of forklift truck, and the type most people instinctively think of when thinking of forklifts.

On counterbalance trucks, the forks protrude from the front of the machine, with no outrigger legs or arms, meaning the truck can be driven up to the exact location of the load or racking. This means that no reach facility is required, and lends itself to straightforward operation.

Counterbalance machines are available as electric, gas or diesel powered. Many have sideshifts, a mast tilt facility, and often driver cabs.

As the name suggests, counterbalance trucks operate a counterbalance weight design, with a weight at the rear of the truck off-setting the load to be lifted at the front. Electric counterbalance trucks are able to operate with a smaller counterweight as the battery serves as ballast as well as a source of power.

3 Wheel Counterbalance Forklift Trucks

3 wheel counterbalance forklifts work to the same premise as regular counterbalance machines however the inclusion of a single drive wheel in the centre of the rear of the machine ensures maximum manoeuvrability.

3 wheel counterbalance trucks are perfect for use in applications where space is limited due to their tight turning circles and excellent manoeuvrability. They are also ideally suited to applications that require inside and outside use and racking loading. The combination of counterbalance under-clearance and tight manoeuvrability ensures maximum productivity.

Powered Pallet Trucks

Powered pallet trucks operate to a very similar principle as hand pallet trucks. The operator slides the forks into the pallet to allow for load bearing. On a powered pallet truck however, the lifting of the load, and truck movement, is powered by the electric motor within the machine.

Typically, there is a ‘paddle’ control to select forward or reverse direction, and button control to raise or lower the forks.

As with all electric powered trucks, the batteries contained within need to be charged. Often, with a powered pallet truck, the truck has an integral charger meaning that it can be plugged straight into the mains without the need for a stand-alone charger.

Powered pallet trucks operate best on flat and smooth surfaces.

Established in 1973, Tailift Forklift trucks are sold to more than 50 countries around the world, and enjoy the considerable success in several markets. Tailift manufactures full series of materials handling machines include ICE counterbalance trucks, electric counterbalance trucks, pallet trucks, electric stacker, reach truck, electric towing tractors and VNA trucks. If you are interested in counterbalance truck series or other forklifts, welcome to visit Tailift’s website to learn more details and feel free to contact with us.

Article Source: http://www.bendigomitchell.com/kb/forklift-truck-types

Purchasing a New Forklift Truck vs Forklift Truck Refurbishment

Posted on August 17, 2016 by Camille F.

A forklift truck is an extremely important and key piece of machinery in any materials handling business, or indeed any trade requiring the lifting and moving of heavy loads. Any business owning and running a truck and relying heavily on its use in day to day business will be keen to ensure access to a reliable machine at all times.

Should the circumstances arise where one is required to consider the purchase of a new forklift truck, it is important to review all the available options in order to decide on the best course of action for your business?

Consider the requirements of your business, the amount of load and the number of hours you require your machine to work. There are many advantages of purchasing a new machine; however it is important to weigh up all the options carefully before coming to a decision. For some businesses with an existing truck, it may be prudent to consider the option of forklift truck refurbishment.

If you are considering purchasing a new truck, ensure that the specifications of any machine suggested are suitable for your requirements. If you are already running a machine you will be clear with regards to this. Any reputable dealer will be keen to supply you with the correct machine for your application and you should be asked to provide pertinent information, such as type and weight of load to be lifted, height requirements, and the environment the machine will be working within. If you are still unsure or new to using a forklift truck consider hiring a machine, before purchasing, to ensure you have selected the correct truck for the job.

Buying new can be an advantage when the machine is to be utilized for 40 hours or more, and it also allows one to take advantage of the latest technological advances. Some machines are more affordable than others so it is important to shop around and explore all the options. It may also be possible to obtain a lease purchase agreement to spread the cost of your forklift truck, thus making buying new a more affordable option.

For those looking to improve the reliability of their machine without replacing it, the utilization of a forklift truck refurbishment service may be a preferred option. Again it is important to make sure you entrust your machine to a reputable firm. Enquire as to the type of inspection that will be carried out and what it will cover. A common list of areas that should be included in an inspection is:

Mast carriage and load forks

Engine transmission

Over head charge and chassis

Steer axle and steer ram

Hydraulics

Electrics, batteries and motors

Wheels and tires

Operators seat and cab area

Exhaust system

Brakes and drive axles

Some companies will also carry out a Thorough Examination Inspection on completion as well as a complete re-spray of the machine as part of the service.

In summary buying a new forklift truck can initially be an expensive purchase, but in the long run it can be a key asset in improving the productivity of your business. Buying new allows one to obtain a machine that is perfectly tailored to the job it is required for. However for those companies, with an existing machine, who are on a tighter budget, forklift truck refurbishment can offer another solution, improving reliability and longevity of an existing forklift truck.

Taiwan Tailift is a professional forklift truck manufacturer and supplier. Please look around the site and if you like, contact us for more information about our company, tool catalogs, equipment and services or with any other questions you need addressing. Our experience provides us with the capability to develop solutions. Developing partnerships with our customer is important in our commitment to provide total customer satisfaction.

Tailift Material Handling Taiwan CO., LTD.

Forklift Truck Department

OEM & ODM Business Cooperation

5, ZiLi 1st Rd, Nankang Ind. zone, NanKang, NanTou. Taiwan, R.O.C

TEL : +886-49-2263800

FAX : +886-49-2252919

Contact: Mr. Bruce (ext. 127)

Mr. Johnson (ext.103)

Sales Mail : insales@tailift.com.tw

Head office

269, Sec 1, Shein Lin Rd, Taya, Taichung. Taiwan, R.O.C

TEL : +886-4-25666100

FAX : +886-4-25671670