Category Archives: Sport

The Advantages of Using an Adjustable Seatpost with Your Cycle

Posted on by

One of the most highly demanded and a favored product by cyclists around the world is the adjustable bicycle seatpost. In the past, cyclists relied on fixed seatposts, where the height of the seat could only be increased or decreased by adjusting the seatpost clamp through the manual operation of wrenches. But, the use of it has brought a sort of revolution in the world of cycling. Only a simple push of a remote button switch mounted around the handle that is connected by a wire enable riders to increase or decrease the height of the seat, even while riding. Also known as a dropper seatpost, the innovative product is steadily winning the hearts of cycling enthusiasts.

 

Easy to Fit in Your Cycle

 

Riders do not need to buy a new special model of cycle so as to put a new adjustable seatpost. Manufacturers commonly produce adjustable seatposts in the BMX industry standard outer diameter of 27.2mm, making it usable across several varieties of bicycles. Adjustable seatpost with outer diameters of 30.4mm, 30.9mm and 31.6mm are also widely available in the markets.

 

Unparalleled Comfort

 

Different seating positions are required for easy maneuvering of the cycles across different terrains. All cyclists must have experienced that the position which would seem to be absolutely comfortable on a straight road could be really be hard around difficult uphill or downhill terrain. But being able to control the size of the seat with an adjustable seatpost, offers riders the flexibility to comfortably navigate across different terrains.

 

Higher Efficiency and Stability While Riding

 

When the adjustable seatpost is up, pedaling becomes more efficient as cyclists can use the whole range of motion of their leg muscles. When the trail points downhill, dropping the seat allow cyclists to lower their center of gravity, in turn providing more riding stability. Thus, the rider has the freedom to choose the best seating position, based on their need to either ride faster or roll comfortably. All ‘Tour de France’ riders use adjustable seatpost with their cycles because of this very reason.

 

Different Variations Available in the Market

 

Several manufacturers currently produce different variants of adjustable bicycle seatposts based on different technologies. The most advanced as well as costly versions are operated by hydraulics. Similarly, there are also seatposts that are operated by air pressure. But the most commonly available ones are spring based variations. Hydraulics and air pressure operated seatposts require higher maintenance and are vulnerable to leaks, while spring operated versions often last longer and are easier plus cheaper to maintain.

 

Buy the Adjustable Bicycle Seatpost That Gives You the Best Value

 

Whether you are an urban rider or an adventurous mountain bike rider, seek the dropper seatpost that provides you the best value. Choose a product that is comfortable to use but isn’t too expensive to buy and maintain either. Spring operated versions could be one of the better choices. However, in case of heavy duty mountain bike riding getting a hydraulic version can be worth it as well.

 

G-MA Engineering Co., Ltd. is the leading and professional titanium bike parts manufacturer in the industry. If you are interested in learning more information about bicycle seatpost and other bike parts series, welcome to visit the website of G-MA to obtain further details. Any questions you have are also welcome to contact with us.

 

 

Article Source: http://EzineArticles.com/9238895

 

How to Choose a Wonderful Racing Bike

Posted on by

The racing bike is one of the best options to improve physical fitness by long-distance riding and high-speed movement on lines with a smooth finish. Regular driving on a highway or model contributes to the harmonious development of all muscle groups. That is why experienced cyclists are increasingly choosing it. So, how to choose a wonderful racing bike?

 

Above all, let’s consider briefly the differences between road racing models and other types of two-wheelers, including:

 

  • Lightweight frame, wheels, and components
  • Narrow tires
  • The front fork is often made of carbon fiber
  • Without back or front suspension

 

Frames

 

When buying such a bike, future owners have to choose between the frames, made of carbon fiber and aluminum. Most of the aluminum frames excel at driving on a flat surface. However, this option is much cheaper as compared with carbon. Racing bike frame made of carbon fiber exhibit improved resistance to stress and maximum effective cushioning during the transport.

 

Wheels

 

As already mentioned above, the racing bikes are often equipped with narrow high-pressure tires. The surface of the latter contains a minimum quantity of protectors. Wheels that are tailored to these features would provide a low-level friction from the road surface, which contributes to the development of a high speed.

 

Pedals

 

Most of such bikes have no pedals as standard. This is due to the need of suiting the characteristics of riders’ shoes. Competent approach to the choice of the pedals is largely reflected in the comfort of driving and achieving the desired results.

 

Recommendation

 

If you are in need of a racing bike, I would recommend the 700C racing bike. This bike comes with the ultra-light aluminum alloy frame, which is anti-static coated. Thus, it looks nice and is durable for use. And the three aluminum alloy spokes provide high strength and speed improvement. What’s more, the racing 46T crankset with exquisite workmanship keeps fast riding.

 

Summary

 

When choosing the first racing bike, special attention should be paid to the racing bike frames, wheels, and pedals, as all this would affect the future riding experience. And I think the 700C racing bike will be a good option for ordinary sports fans and those who are planning to improve physical fitness and develop all muscle groups by long-distance riding and high-speed movement.

 

Maxway Cycles Co., Ltd. is a bicycle frame manufacturer and has been in this industry for over 20 years. We specialize in producing various types of Top-End frames in steel, aluminum and carbon fiber composite materials.

 

We currently supply to global customers. Many of them are reputed bicycle assemblers, such as Jamis, DMR, Ritchey, Surly, Salsa, Dawes, Greenspeed, Rans, VooDoo and so on.

 

We are fully confident about doing the greatest job for our customers. We know what it takes to provide the best quality of product at very competitive pricing, and get it fast delivered fast to customers. As a customer of Maxway, you are assured of receiving the highest quality product at a reasonable price in short lead-time. Welcome to visit the website of Maxway to learn more information about racing bike frame series and other bicycle parts. Feel free to contact with us.

 

Article Source: http://EzineArticles.com/9532951

 

How Important Are MTB Bicycle Frames?

Posted on by

MTB bicycle frame is the basis for the bicycle’s sturdiness, weight and general appearance. This is why when purchasing new mountain bikes, most cycling professionals and enthusiasts give the frames a thorough check instead of just giving it a casual or cursory look. Though it may appear similar to a casual observer, each frame has different sizes, symmetry and materials used which is tailored for a particular body structure of the cyclist who will be riding it.

 

Most of the mountain bike frames available in the market today is usually made up of aluminum steel. This makes for a sturdy, yet very light structure, making it easy for the cycling enthusiast to maneuver. Although there are still frames that are made up of galvanized iron or steel, these are rapidly fading fast into oblivion and is being replaced by aluminum and some other lighter materials like titanium.

 

Naturally, if you are a cyclist, you always undoubtedly would prefer the lightest material to make up your frame. This is where the ultra-lightweight metal call titanium comes in. Bike frames that are made of titanium are almost weightless, yet are sturdy enough to withstand the rigors of cross country cycling. The only problem with titanium as of the moment is the exceedingly high cost which only a few cycling enthusiasts can afford. This is why most cycling enthusiasts still prefer their bikes to have aluminum frames because they are very affordable. Though they may not be as light as those frames which are made from titanium, aluminum frames do exceedingly well in various types of tracks.

 

Another area of consideration which you must carefully check out is the size of the frame. Bear in mind that MTB bicycle frames have different sizes which correspond to the height and body physique of the cyclist who would be riding it. The size of the mountain bike frame is usually determined by measuring the expanse of the frame from the center of the base bracket to the uppermost portion of its top tube.

 

Getting the right bike frame is very important since it can affect the way you maneuver your bicycle. Remember that all frame sizes are influenced by the unique body structure of the cyclist who will be riding it which is why you have to carefully select the MTB bicycle frame with a size that closely matches your own body physique.

 

Once you have correctly determined the weight and the size of the mountain bike frame that you consider perfect for your body structure, you can now begin that exciting cross country journey that you have been longing to indulge into. If you need further information about MTB bicycle frame, welcome to visit the website of MAXWAY and feel free to contact us!

 

Article Source: http://EzineArticles.com/expert/Suzie_Sanchez/456211

Article Source: http://EzineArticles.com/4683080

How to Choose the Right Bicycle Saddles for Riders

Posted on by

Finding the right bicycle saddle is crucial since this greatly affects the rider’s comfort and performance in their ride. Picking the right saddle is actually challenging for all riders regardless of their weight and size. For heavy riders however, the additional weight and pressure put on the seat may cause discomfort and strain. Here are a few things heavy riders may want to consider in choosing a saddle for cycling comfort.

 

Consider the width of the saddle. The idea of the saddle is to support the two “sit bones” to keep the rider balanced on the bike. Heavy riders may want to consider choosing a slightly wider saddle for better support and comfort on their backside but not too wide as this may cause chaffing or rubbing.

 

Consider the bicycle saddle pad. It is a misconception that the best saddle pads are those that are soft and thick. While these types of pads can be comfortable in the beginning, these can cause excessive heat as these absorb much pressure from the rider’s weight and movement and thus create discomfort during the ride. Experts suggest that heavy riders get a saddle seat with firmer foam since this doesn’t quickly compact compared to a foam or gel cushion. Also, experienced heavy riders agree that it is wise to choose bicycle saddles with the least cushioning but still is comfortable for the rider to sit on. It may take some time to get used to riding a firm saddle but over time, the ride would be more pleasant.

 

Consider durability. Because foam saddles easily wear out for heavy riders, these have to be replaced more often than a lighter cyclist would. Experts suggest that leather saddles can be a great option for heavy riders since these are more durable. Also, the longer the rider stays on the saddle; the seat becomes molded to the rider’s anatomy.

 

Shop wisely. It is advisable that a rider give the bike a test ride before buying it. During the test ride, the rider may vary positions on the saddle, ride on different speeds, hit some bumps and try some uphill terrain. This way, the rider can test the comfort of the saddle seat and the sturdiness of the saddle seat. Also, it is suggested that the rider also inspect the rails of the saddle. Although chromoly is the most affordable and suitable for most riders, titanium rails are more durable and long-lasting.

 

Considering all the factors, the key to finding the right bicycle saddles is optimum support and comfort for the rider.

 

BEV was established in1992 and is one of the bicycle industry’s leading component manufacturers. We are proud to offer the finest quality bicycle saddles, frames, forks, handle bars, bar ends and much more to customers and OEM producers around the world. If you are interested in and need further details about bicycle parts, welcome to visit our website and feel free to contact BEV now!

 

Article Source: http://EzineArticles.com/expert/Joan_Bishop_Denizot/2223664

Article Source: http://EzineArticles.com/9364794

 

Cyclocross Bike Frame and Its Related Simple Introduction

Posted on by

What is cyclocross?

 

Cyclocross is a discipline that combines both off-road and on-road cycling. Typical cyclocross terrain includes grass, woodland trails, pavement, mud and even sand!

 

Rapidly growing in popularity, cyclocross racing is primarily an autumn/winter sport – with tens of thousands of fans attending races in Northern Europe. The attraction of cyclocross racing is the fast and frantic pace, around a lapped circuit of 2-3km in length.

 

The good news is, you can do cyclocross all year round! A cyclocross bike is incredibly versatile, and can make the perfect commuter, touring bike or do-everything ride.

 

What is unique about a cyclocross bike?

 

At first glance, a cyclocross bike can appear to look like a road bike; however there are many features that make them uniquely different and more suited to the specific purpose of multiple terrains riding.

 

These differences include the tires, frame design, brakes, gears and pedals. Below we only introduce the cyclocross bike frame designs.

 

Cyclocross bike frame design

 

The frame of a cyclocross bike has been adapted from a standard road bike frame, in a number of ways:

 

  • Increased tire clearances on the frame and fork – A cyclocross bike frame have increased clearance for tires on the front and rear of the frameset. This is so that you can use larger volume tires, for increased grip and traction; as well as allowing the wheels to keep turning, even when they are carrying significant quantities of mud or trail debris in the tire tread.

 

  • Frame geometry – Cyclocross bikes often have more relaxed geometry angles, to give them a more upright riding position than a road racing bike. This position helps with shock absorption off-road, but it also allows you to utilize the bike across multi-disciplines, such as touring and commuting.

 

  • Frame material – Many modern high-end road bikes are now made of carbon fiber, due to its light weight and vibration absorbing characteristics. Cyclocross bikes have followed this trend too, with many high end models made of carbon. However, aluminum and steel frames are also still popular; because they provide a lower cost option, and provide a more durable frame if the rider wants to use the bike for touring or commuting.

 

Frame sizing on cyclocross bikes

 

As with all bikes, the sizing of cyclocross bikes is vital to maximizing comfort and performance when you are riding. This is especially important if you are going to be using the bike for long distance touring or winter training as well.

 

 

What else can I use a cyclocross bike for?

 

Cyclocross bikes are not just reserved for use off-road. The relaxed geometry, strong frame, powerful braking and good tire clearance, mean a cyclo-cross bike is highly versatile machine. ‘Cross bikes can easily be used for other disciplines within the sport; such as commuting, winter training, cycle touring and off-road adventures.

 

When you are considering our range of cyclocross bikes, you may want to consider what other uses you may have for the bike; some bikes have mounts for pannier racks and mudguards, as well as more powerful disk brakes that are ideal for touring with heavy loads.

 

If you need more details about cyclocross bike frame and other bicycle frames, welcome to visit our website and feel free to contact MAXWAY – the professional bike frame manufacturer in Taiwan.

 

Article Source: http://guides.wiggle.co.uk/cyclocross-bike-buying-guide

 

An outstanding Archery and Crossbow manufacturer – Man Kung

Posted on by

About Man Kung

Established in 1988, the Man Kung Company is dedicated to the design and manufacture of a wide range of crossbows, knives and related products. Man Kung is specialized in crossbow, archery bow, toy archery, slingshot, blowgun, baton, and other bow accessories. We have always been dedicated to the research and development of new products to meet current market demands.

As a professional archery manufacturer and crossbow manufacturer, Man Kung’s outstanding quality has won us a high reputation from both domestic and international customers. Man Kung’s permanent makeup supply has obtained diverse certifications.

In addition, we have a strong commitment for providing customers with the most competitive prices and fast delivery. These have established Man Kung as a dependable brand name in both domestic and foreign markets.

 

Main Products:

—Crossbow—
Crossbow MK-300RCCrossbow MK-380

Crossbow MK-300ACCrossbow MK-80A3

 

—Archery Bow—
Archery Bow MK-CB75BArchery Bow MK-CB009AC

Archery Bow MK-CB008Archery Bow MK-RB007B

 

—Accessories—
Crossbow Accessory MK-AL16-BKCrossbow Accessory MK-AL

Crossbow Accessory MK-4x32Crossbow Accessory MK-3BAL

 

—Slingshot—
Slingshot MK-SL06/OSlingshot MK-T11

 

—Baton—
Baton MK-NS-16FBaton MK-LCH-602

Poe Lang Crossbow Manufacturer

Posted on by

Established in 1986, Poe Lang Enterprise Co., Ltd. is a leading crossbow manufacturer in Taiwan. Poe Lang Enterprise has a great reputation based on the superior product research development expertise excellent quality and high-end crossbows and compound bows. Our crossbow products are the following: self-cocking pistol crossbow, recurve crossbow, fixed stock recurve crossbow, compound crossbow, medium sized crossbow etc. We invent many remarkable crossbows and bows equipment to meet up the demand of various markets around the world. And we cooperated with many good reputation enterprises to create competitive bow products and relating accessories. And we have a strong commitment for providing customers with the most competitive prices and fast delivery. We also hope that we could build up close partnership for mutual profit. Please browse our crossbow manufacturer website and send your inquiry immediately for creating your own brilliant business.

crossbow

crossbow

 

Poe Lang Enterprise Co., Ltd.
No. 17, Alley 46, Lane 484, Sec.2, Feng Shih Road, Feng Yuan, Taichung 42081, Taiwan,R.O.C
Tel :+886-4-25273604, +886-4-25232496
Fax:+886-4-25278253
Email: sales@poelang.com

The Best Archery Manufacturer: Poe Lang Enterprise

Posted on by

Poe Lang Enterprise was founded in 1986, is one of the best archery manufacturer in Asia. Poelang’s products are the following: archery, crossbows, bows, aluminum archery, wooden archery and carbon archery and archery accessory. Our profound R&D skills on archery equipment and international marketing experiences are what made us renowned internationally. Moreover, we cooperated with many good reputation enterprises to create competitive archery products and relating accessories. Our reputation is based on the superior product research development expertise excellent quality. We invent many remarkable crossbows and bows equipment to meet up the demand of various markets around the world. To provide the most competitive price, fast delivery and customer satisfaction are our business principle. We have confidence that we can be your reliable business partner to work with. Please browse our archery manufacturer website and send your inquiry immediately for creating your own brilliant business.

archery

archery

Poe Lang Enterprise Co., Ltd.
No. 17, Alley 46, Lane 484, Sec.2, Feng Shih Road,Feng Yuan, Taichung 42081, Taiwan,R.O.C
Tel :+886-4-25273604, +886-4-25232496
Fax:+886-4-25278253
Email: sales@poelang.com

Q Group – Sports Eyewear Supplier

Posted on by

Q Group CO., LTD is a specialized manufacturer of professional sports eyewear and safety eyewear in Taiwan. Its product offerings include safety goggle, sports goggle, safety eyewear, sports safety eyewear, aluminium sunglasses, metal eyewear, SKI goggles and more. We have confidence that we can provide the 100% service and high quality products. The most of all, we are proud of our design team, we can design the goods according to your ideas and opinion. Also, our goods are meet with the standard requirements for the ANSI, CSA, AS and CE etc. High quality is our always promise! If you are looking for high quality safety goggle, sports goggle or other products of sports eyewear and safety eyewear, please do not hesitate, just contact us now.