Choose The Right Paper Towel Dispensers!

Posted on by

A paper towel dispenser is an essential element in any sanitary restaurant kitchen or office restroom. The mounting style and type of dispenser will affect how paper towels are stored, as well as how they are dispensed. Choosing the right paper towel dispenser for your business may seem difficult, but this guide will explain the different designs and types of dispensers so you can make the best choice!

 

Mounting Styles

If there isn’t much room in your bathroom or kitchen, then a surface-mounted or recessed paper towel dispenser would be the best fit. By mounting it to the wall, you save precious counter space and provide convenient access to paper towels right by the sink. The sleek design of recessed models is perfect for tight bathrooms and kitchens where it is best to avoid bulky or cumbersome paper towel dispensers. Both surface-mounted and recessed dispensers are ideal for dispenser / trash can combinations.

 

Countertop paper towel dispensers work well for more spacious bathrooms. With the freedom to pick up countertop dispensers and move them around your hotel or office bathroom, your options are virtually limitless.

 

Dispenser Types

When choosing the right type of dispenser, it is best to think about what type of paper towel you will be dispensing in your commercial kitchen or bathroom. Each dispenser has its benefits and certain paper towels are better suited to fit each dispenser. Paper towel options include standard rolls, center pull rolls, perforated rolls, and folded paper towels.

 

Standard Rolls

Large, standard rolls are perfect for high traffic areas. See the chart below for the dispensers most compatible with this type of roll.

 

DISPENSER TYPE DESCRIPTION BENEFITS
Lever / CrankSB-8522 Paper Towel Dispenser This style is a convenient way to dispense a variety of paper towel lengths; however, these dispensers are not as sanitary as hands free dispensers due to the physical contact between each user and the lever or crank.
  • Allows you to dispense the desired length of paper towel
  • Ideal for light-traffic environments

Hands Free

SB-9523 Auto Paper Towel Dispenser

 This dispenser allows customers to pull or tear a desired length without touching the exterior of the dispenser. Motion sensors eliminate the need to pull on a lever or crank, ensuring that each paper towel is only touched by one user and germs are not transferred from user to dispenser.
  • Most hygienic solution
  • Dispenses a set length of paper towel to limit waste

 

 

Center Pull Rolls

Center pull paper towels are a cost-effective and sanitary option. The large roll accommodates high-traffic environments, while the pull-down dispensing method ensures that each paper towel remains clean and unused until it is dispensed by each customer or employee. By removing the center roll, you can then pull each paper towel down from the inside out, further contributing to the sanitary qualities of this paper towel roll.

 

DISPENSER TYPE DESCRIPTION BENEFITS
Center PullCenter Pull Paper Towel Dispenser Customers and employees can pull a single paper towel straight down from the center of the unit. Featuring a large capacity barrel, this dispenser is ideal for high traffic environments.
  • Dispenses single sheets to minimize waste
  • Each user only touches 1 towel
  • Great for high-traffic kitchens or bathrooms

 

Perforated Rolls

With perforated sections, customers and employees can easily tear the desired amount to clean up spills. These rolls are ideal for soaking up messes around your school, office, break room, or kitchen. Soft-to-the-touch, perforated rolls feature a combination of strength, absorbency, and comfort.

 

DISPENSER TYPE DESCRIPTION BENEFITS
CountertopCountertop Paper Towel Holder Made of rustic-looking wrought iron, this paper towel holder is a sturdy yet stylish option for your restaurant or bar.
  • Perfect for individual tables at busy bars and restaurants that serve crab legs, barbeque, and wings
  • Great for countertop applications
Surface-MountedSurface Mounted Paper Towel Holder Easy to mount, this paper towel holder is perfect for dispensing standard, perforated paper towel rolls at the back of the house for commercial kitchens or next to sinks in healthcare facilities.
  • Mounts to walls for convenient placement near sinks

 

 

Folded Paper Towels

Folded paper towels can be used for both countertop and surface-mounted dispensers. Folded paper towels include C-Fold and M-Fold styles. Centerfold paper towels are made to lie on top of each other, while multifold paper towels are made to interlock with each other. The interlocking nature of M-Fold paper towels allows you to fit more paper towels in each dispenser, whereas C-Fold paper towels are easier for guests to separate. Great for dispenser / trash can combinations or countertop baskets and holders, the chart below includes additional information on the benefits of each folded paper towel dispenser.

 

DISPENSER TYPE DESCRIPTION BENEFITS
C-Fold / M-FoldC-Fold / M-Fold Paper Dispenser Conveniently dispenses paper towels one at a time to cut down on waste.
  • Paper towels remain enclosed and sanitary inside the dispenser
  • Easy to separate paper towels
Holders / BasketsPaper Towel Holder / Baskets Guests can easily reach in to access the top paper towel from the holder or basket. Holder/baskets allow for convenient placement near bathroom sinks and they can be easily moved to wipe down counters.
  • Great for countertops
  • Easy mobility
  • Ideal for light-traffic environments
Dispenser / Trash Can CombinationsDispenser / Trash Can Combination This style dispenses paper towels and collects waste. Guests can easily grab one paper towel at a time and quickly dispose of it in the trash can space below. With the ability to dispense and dispose of paper towels in one convenient location, you’ll save space and promote a sanitary environment
  • Great for restrooms
  • Saves space
  • Promotes the highest level of sanitation

 

If you need more information about paper towel dispensers, I recommend that you can try to visit Kingsway Technology Inc.

 

Kingsway, as a professional sanitary products manufacturer, it provides high quality sensor taps, foam soap dispensers, toilet flush valves etc. for you to choose. Also, it manufactures series of washroom accessory, which including paper towel dispensers, roll paper tissue dispensers, and standard soap dispenser. For more details, please feel free to check Kingsway website: www.kingswaytech.com

 

 

Article Source: https://www.webstaurantstore.com/guide/698/types-of-paper-towel-dispensers.html

Advantages and Disadvantages of VNA Trucks Design

Posted on by

Determining the ideal aisle width for your application means you need to look at a lot of factors. Is Very Narrow Aisle, or VNA, right for your warehouse? In this article, I am going to go over the advantages and disadvantages of VNA truck design, and when you would use it.

 

First of all, Very Narrow Aisle is defined as less than 6 feet between the racks, and is usually used with selective pallet rack. Often, guidance systems like guide rail or wire is used to keep the trucks on track. The main component that decides your aisle width is your lift truck. If you are doing VNA, you will need a special forklift to navigate the aisles, you can’t use a standard forklift. VNA trucks (turret trucks) usually only turn the load instead of the whole vehicle, and isn’t dock working trucks.

 

Will VNA Trucks Work For You?

NA2.0 VNA Truck

Advantages:

  • Improves space, you can store 40%-50% more inventory
  • Good for applications with less than pallet storage
  • High productivity in full pallet retrieval

 

Disadvantages:

  • Requires a certain lift truck which is more expensive
  • Two vehicles cannot pass at the same time
  • Lower flexibility, you usually have to store the same SKU
  • Requires a “hand-off” of inventory from the VNA forklift to a dock working forklift on outbound, and the opposite for inbound

 

If the pros outweigh the cons, then utilizing Very Narrow Aisle would be beneficial to your warehouse.

 

Need more VNA Trucks information, try to visit the well-known forklift truck manufacturer – Tailift Material Handling Taiwan Co., Ltd. The company provides kinds of material handling equipment, including counterbalance trucks, electric pallet truck, electric towing tractor, VNA trucks, and much more electric forklift trucks. For further details, please check Tailift product pages and send inquiry to them.

 

 

Article Source: https://www.steinservicesupply.com/blog/advantages-and-disadvantages-of-vna-design

HMF Invests To Boost Production Capacity

Posted on by

Danish family-owned crane manufacturer HMF has invested heavily in automated production processes to meet increasing international demand.

HMF Pipe Bending Machine

The company has invested in a brand-new production line for knuckle booms, where the optimized flow ensures that knuckle booms are ready-manufactured in one single workflow, before sending them directly into the fully automatic paint facility.

 

In connection with the new production line, HMF is also implementing a brand-new welding robot that uses leading technology with adaptive welding and a fully automatic conveyor system. A new drilling center capable of handling very big items has also been added to the new production line for knuckle booms.

 

“In general, HMF experiences an increasing demand especially for larger cranes. Thereby the need for more jib extensions increases correspondingly as does the need for hydraulic pipes,” said HMF.

 

In response to this demand, the company has ordered a new fully automatic pipe bending machine for hydraulic pipes, which is to ensure the necessary capacity and delivery time. At the same time, the test capacity for large range cranes has been increased by 50%.

 

Concurrently with the increasing order intake, the number of employees has now exceeded 550 and in March HMF started using two newly refurbished office buildings. This made room among others for an extension of the R&D capacity with more than 25%.

 

The manufacturer is introducing a welding robot at the HMF Welding Academy as well, where the purpose is to train young metalworkers as well as upskilling their existing employees. Here HMF has also invested in analysis equipment for securing the quality of the weld seams.

 

“At the same time as we are investing heavily in new processes, facilities and staff, it goes without saying that we also optimize where we can. For example, we have gone through our entire range of sub-suppliers, and among others we have changed from yellow chromate to zinc-nickel treatment on sub-components to further enhance quality, just as we ensure capacity with our sub-suppliers – among others by Northern Europe’s most modern laser cutter,” said CEO Brian Stage.

 

Recommend Pipe Bender Machine Manufacturer – Shuz Tung Machinery

CNC16 Bending Servo Control Bender

Established in 1978, Shuz Tung has been dedicated to manufacturing of various machinery and automation equipment. More than 30 years, Shuz Tung has accumulated advanced and professional techniques for superior production quality on practical and solid ground. The efforts and achievement are high recognized by all the customers.

 

Based on the long experience in pipe bending field, Shuz Tung has won the great confidence from customers who count on the precision and effectiveness the pipe bending machines deliver. The company will show you how you can utilize your pipe bending machine in your store for a high quality service to your customers. If you have any interest in pipe bender series, try to visit Shuz Tung and send inquiry to let them know your requirements.

 

 

Article Source: Cranes Today Magazine

Article Source: Industry News

Die Casting Parts Around Your Lives – Learn What Die Casting is.

Posted on by

Die casting is an important manufacturing technology used in many industries. Companies can make nearly all parts using different casting processes.

 

What is Die Casting?

 

According to The Engineer’s Handbook, this is a manufacturing process where solid metals are melted and heated to a desired temperature after which, it is poured into a cavity or mold with proper shape.

 

The melting and heating process may require different furnace heating temperatures. Moreover, different chemical substances may be added to modify chemical composition of metals.

 

The process may be a single step of a series steps depending on the complexity of the metal substance. Cast parts may range from fraction of inches to over 35 feet. And final product can have virtually any size depending on what designer desires.

 

Apart from these, it is also crucial to highlight the major metal casting processes that have been used in this industry.

 

  • Sand casting
  • Lost Wax casting
  • Permanent mold casting
  • Centrifugal casting

 

What Makes Die Casting a Distinct and More Importantly Intriguing?

 

All the other processes I have listed above are collectively referred to as “foundry processes” except die casting.

 

Let’s zero into what die casting is.

 

The Engineering.com defines die casting as a manufacturing process that produces metal parts of virtually all designs by forcing molten metal under high pressure into a die cavity. The underlying factor here is exerting high pressure through a die.

 

It is a key factor that distinguishes this metal fabrication process from the other metal casting procedures listed above.

 

For instance, if we look at a process such as lost wax casting, investment casting or sand casting procedures, the underlying factor in this case is the fact that, the process depends on gravity to fill the mold.

 

The Cambridge Dictionary defines gravity as a natural force that attracts objects towards one another, more so that force, which makes things fall on the ground.

 

This further reveals more properties of die casting in relation to other metal casting processes.

 

Here are three key points to note:

  1. Metal die casting process has a short cycle time
  2. Metal flow is faster in die casting due to existence of external force
  3. Molds in die casting are not as thick as those used in the sand casting or investment casting processes

 

Metal die casting process is used to produce various shapes from a number of non-ferrous metals such as brass, zinc, aluminum, magnesium and copper among other metals.

 

It is one of those manufacturing processes with the ability to produce high detailed and accurate parts. It is also preferred for mass production of components as opposed to other manufacturing processes. Take for instance, the faucet parts, door knobs, decorative parts, etc.

 

Die Casting Examples

Die casting is one kind of technology that we have lived to embrace in our day-to-day activities. This is a popular manufacturing process that is used to produce a number of metal parts both for industrial and domestic applications.

 

For this particular section, we’ll categorize these parts based on where they are used i.e. their industrial or domestic applications.

 

The most common die casting examples include the following:

 

Brass Die Casting Parts

These are common examples of die cast parts that we meet in our daily lives. They are available in different configurations. These lamp parts include brass fixture body parts, necks and breaks among others.

 

Most lighting distributors place their orders to different lighting parts suppliers, and give the brass lamp parts order to a casting manufacturer; this will save them a lot on cost.

 

Brass Parts May Include:

  • Brass electrical components such as the socket termination parts and coaxial cables.
  • Mechanical parts such as those that are used in the plumbing industry. These may include pipe joints, washers, nuts, flanges and T-joints just to mention a few.
  • House accents such as brass candle holders, vases, canisters, decorative pillows, etc.
  • Furniture hardware such as door knobs, locks, and handles.
  • Brass precision components such as clips, connectors and taps among other sections.

 

Zinc Die Casting Parts

Zinc is also a popular metal that is used in this industry. Normally, the manufacturers have to choose between the ZA and ZAMAK alloy. The choice of any alloy will depend on the desired physical properties of the end product. That is, parts cast using the ZA alloys have superior strength due to high mounts of aluminum. The Zamak alloys offer better castability.

 

The zinc die casting parts may include window hardware, electrical components, bathroom fixtures and office equipment, just to mention a few.

 

Steel Die Casting Parts

Like the other metals mentioned above, the steel cast parts also form an integral role of our lives. This involves casting different types of steels such as stainless steel.

 

Some of the most common components that are manufactured via this technique include valves, hydroelectric turbine wheels, tooling equipment and pumps among other parts in food, electrical and power industries.

 

All these parts must be manufactured as per the international standards and regulations.

 

Iron Die Casting Parts

This involves casting a number of iron carbon alloys. These metals have a carbon content that is more than 2%.

 

Again, the iron casting company should be able to choose that specific metal that can meet the requirements of the end users. This involves determining the carbon content, iron and silicon content.

 

Aluminum Die Casting Parts

Both aluminum and aluminum alloys are commonly used to cast different machine components. These alloys contain different elements such as copper, manganese, magnesium, silicon and zinc, just to mention few. These elements exist in different proportions thus; different procedures can be used to cast the aluminum parts.

 

These aluminum die casting parts are used in different industries such as aerospace, electronics, plumbing and chemical industries.

 

Summary

In summary, there are very many types of components and structured that can be manufactured through die casting. It is upon the end user to choose that kind of metal he/she desired for a given application. However, some may require additional secondary operations.

 

If you need further details about die casting, I recommend that you can visit the website of Champion H&C Inc.

 

This company provides various die casting processes for you. Such as aluminum die casting, zinc alloy die casting, etc. Moreover, they also give you CNC lathe machining, CNC turning, CNC milling services. Learn more information, please check Champion H&C website: www.hc-aluminum.com

 

 

Article Source: http://www.gatonbrass.com/die-casting/

Pro and Cons of Using a Malleable Iron Pipe

Posted on by

While malleable iron pipe fittings may sound old-fashioned next to lightweight PVC pipe, it has become valuable once more for solar heating systems, and other applications. Learn more about the pros and cons of malleable iron pipe below.

 

Pros of Malleable Iron Pipe

 

Malleable iron pipe fitting is the conduit system of choice for solar heating systems. Most solar heating systems for interior heat and hot water supplies use a dense fluid to trap solar energy. This fluid becomes much too hot for PVC pipes to tolerate, but malleable iron pipe is ideal to transport it. All the fittings of a solar heat system can be made of malleable iron pipe. Malleable iron pipe fitting is also best for cold water plumbing, as it retains its shape in the coldest conditions. Malleable iron is used for galvanized pipe fittings and can be zinc coated for rust and corrosion prevention prior to installation in a plumbing system.

 

Cons of Malleable Iron Pipe

 

Malleable iron pipe fitting without a galvanized zinc coating is unsuitable for factories and fluid transport facilities located near ocean and lake docks. It can rust and corrode on exposure to salt and other waterborne minerals. Heavy malleable iron pipe has been replaced by PVC for household plumbing.

 

If you need more information about malleable iron pipe fittings, visit the website of Golden Highope: www.golden-highope.com to find pipe fittings you need.

 

 

Article Source: https://www.doityourself.com/stry/pro-and-cons-of-using-a-malleable-iron-pipe

Permanent Makeup Vs Microblading – What’s The Difference?

Posted on by

When it comes to waking up with the perfect eyebrows to envy all others, there are two techniques that are used in the industry; traditional Permanent Makeup and Microblading. But what’s the difference between the two techniques and what fabulous results can each treatment offer? Read more below:

 

Permanent Makeup

Permanent makeup is the most common phrase used but terms such as Micropigmentation and permanent cosmetics are also used to describe the same procedure. For permanent eyebrows, as well as lip and eyeliner treatments, a cosmetic tattooing machine is used to gently implant pigment into the skin using a variety of fine needles. It’s different from a regular tattoo machine in that the frequency is much lower meaning the pigment is implanted closer to the surface. Some would say the sensation feels like an electric toothbrush pressed against the skin; a little uncomfortable but not too painful.

 

There are a variety of looks you can opt for when choosing your permanent makeup treatments. If it’s a dramatic powder brow you are looking for to mimic the look of makeup, you’ve got it. If it’s more realistic brows you’re looking for go for a procedure using individual strokes to create your desired brow shape, go for it. You can also opt for bright lips, natural lip blush, subtle lash enhancement or feline Latino eyeliner flicks – the choice is yours!

 

K.B Pro Brows: Microblading

Microblading is a slightly different technique that’s still firmly in the tattooing family, meaning pigment is implanted into the skin, but a precision hand tool is used instead of a machine. The beauty of microblading is that the hair-like strokes you can achieve are so fine that it’s the most hyper-realistic treatment yet, it’s no wonder that it’s often referred to as ‘eyebrow embroidery’.

 

A microblading technician meticulously draws each hair stroke onto the skin to follow the direction and length of the existing hairs. If there are no hairs present, not to worry, a skilled technician can create beautiful brows that suit your face shape and mimic that of a natural brow. The channels created by the microblading technique are closer to the surface then when using a machine and the needles used are even sharper, meaning even more precise and finer hair strokes can be created. If you want the most natural looking treatment that no one could ever guess you’ve had, this is ‘the’ treatment to go for.

 

Learn more information about permanent eyebrow makeup and permanent makeup machines, try to visit BELLA Co., Ltd. – the company is specializing in kinds of permanent makeup devices and accessories.

 

 

Article Source: http://www.karenbetts.co.uk/blog-post/24-permanent-makeup-vs-microblading–whats-the-difference.html

Alloy-Specific Band Saw Setup Improves Finish Quality at Everising

Posted on by

Saws like band saws and circular saws are the time-honored way to cut raw material into useable forms for further machining in industrial applications. Saw cutting is not a simple process. However, as each alloy has different speed and feed requirements to maximize surface quality and minimize waste.

In the video above, we learn how Taiwanese companies like EVERISING MACHINE CO. are advancing industrial saw technology, with company president Shu-Chai Chiao.

 

“We collect many country’s standards,” Chiao said, explaining how the company stays aware of the cutting requirements of different alloys.

 

“Every country, every manufacturer, has one number. This is a lot of data that we must collect in our computer side, which we can then put in our machines to choose materials. For example, if we’re using a United States standard, we can use that to get information and know what standard component is inside. This information includes cutting data, so we can make it easy to cut the material.”

 

EVERISING builds their own machine tools in-house, and so designs them to minimize vibration, noise and temperature.

 

To achieve the smoothest of cuts, EVERISING joined together with a saw blade manufacturer and developed their machines to properly lubricate the saw blades while in contact with the material.

 

“The cutting surface, whether it becomes smooth or rough is also really important,” Chiao continued. “Our band saws are strong enough and have enough reach that it’s easy to get that smooth cut. We joined together with a saw blade manufacturer and we worked on a solution to lubricate the blades during the cut. We need this for an improved cutting surface. The saw blade, the teeth angle and the way the teeth cut are really important for us.”

 

For more information about band saw series, please visit the EVERISING MACHINE CO. website.

 

 

EVERISING MACHINE CO.

No.1, Jingke 1st Road, Nantun District, Taichung 408, Taiwan R.O.C.

Tel: +886-4-2350-5300

Fax: +886-4-2350-5420

E-mail: evrs@everising.com.tw

 

Article Source: https://www.engineering.com/AdvancedManufacturing/ArticleID/15903/VIDEO-Alloy-Specific-Bandsaw-Setup-Improves-Finish-Quality-at-Everising.aspx

Self-Tapping Screws: How They Work and How to Use Them

Posted on by

When looking for fastening solutions, one common solution to use for routinely maintained products is self tap screws.

 

What Is A Self Tapping Screw?

 

Self tapping screws are fasteners that are designed to drill their own hole as they are screwed into wood, plastic or metal. By using a screw driver and self-tapping screws, precisely fitted threads are created. Self tap screws are ideal for items that require regular maintenance and work well when working with two different kinds of material being fastened together.

 

These screws either come with a blunt, flat, sharp or piercing tip. Sharp-tipped self tapping screws drill their own holes in softer wood and plastic. However, it is helpful to drill a pilot hole when working with harder material. When drilling a pilot hole, make sure to use a smaller bit than the screw so it may still serve its purpose.

 

What material is involved can help determine what type of self tap screw will work best. There are two types: thread-forming and thread-cutting. Thread-forming screws are usually used when working with plastics. Thread-forming screws are designed to stay in place tightly, but over tightening the screw could result in materials breaking under too much pressure. Thread-cutting screws are used mostly when working with metal and wood. One drawback to using thread-cutting screws is that the threads may strip if the application is disassembled. This prevents reuse of the fastener and requires a new, slightly larger self tapping screw when it is time to reassemble.

 

However, there is a solution to prevent stripping. A metal insert can be installed from the beginning that would allow the self tapping screw to be regularly fastened and unfastened. These metal inserts also work to help minimize stress and expand as the fastener is screwed in.

 

Just like other types of fasteners, self tapping screws are available in all shapes and sizes and are also available in numerous different head types. When choosing the right self-tapping screw for any given application, it is important to consider the length of the screw tip. In order for the screws to serve their purpose and work properly, the screw must be drilled fully into the material before threading can begin.

 

Although self tapping screws are typically more in terms of price, they can help cut down on time and labor costs and combine the steps of drilling and fastening.

 

To learn more about where to find high quality self tap screws, please visit Fu Yeh, the professional screw manufacturer in the industry.

 

 

Article Source: http://provenproductivity.com/self-tapping-screws-work-use/

3 Must Have Woodworking Machines for Every Workshop

Posted on by

If you are an aspiring woodworker, who wants to take up woodworking professionally you should give ample thoughts to buying essential woodworking machines that you will need to carry out woodworking projects efficiently. Just like any other craft, woodworking begins with mastering the basic skills and knowledge to use the fundamental tools efficiently. Of course, a lot depends on the kind of projects you want to take up. But make sure that you invest in the essential woodworking machinery gradually. This way you will be able to assess if you really need a particular machine or not. As you gain more experience in the field, you will be able to find more specialized tools that allows you to do more things efficiently.

 

In this article we will not discuss about the basic hand tools that you will need to get started in woodworking, rather we will concentrate on choosing the power woodworking tools, which will take your woodworking experience to a whole new level. The first three woodworking machinery, that we would recommend any aspiring woodworker are: a table saw, a portable planer and a plunge router. With these, you will be able to carry out a number of tasks, right from milling, joinery and shaping.

 

These Three Different Pieces Of Woodworking Machinery Are Very Important:

 

  1. The Table Saw:

 

A table saw is at the heart of every woodworking workshop. There are several reasons why it has that coveted place among the woodworking machinery you have in the workshop– it not only allows great precision in ripping a stock in straight lines but is also useful in cutting it at various angles. It does the basic milling of a stock with ease and is well suited for joinery works.

 

When choosing a table saw, there are a number of factors that you need to consider. The first thing you need to understand is that – it is going to be one of the most used machinery in your workshop, so you must always buy a quality one. The work surface of the table saw should be rigid and strong, and should be able to sail through all types of projects. Ideally, you should buy one that has a handle to raise and lower the blade easily, and another handle that will enable you to adjust the angle of the blade. Another essential feature that it must have is the connection for dust collector. It should have powerful motor that will let you cut through hard wood and make deep cuts. The blades of the table saw are incredibly sharp, so they should come with a blade guard and a power switch that is within easy reach while working on it. Many table saw today come with a paddle switch that can be pressed with your knee or foot if you need to shut it down in an emergency.

 

  1. The Surface Planer:

 

A surface planer is another indispensable woodworking machinery to have in a woodworking workshop. It can help you to be incredibly creative in the work you do by smoothing any rough saw stock to your desired thickness. Gone are the days when a stock was hand planed tirelessly to get the designed thickness and smoothness, a surface planer can help you get the same result in a short time. Typically, a planer has a table of the dimension between 10” to 14” on which you can feed your stock. There are a set of blades that rotates, thereby cutting the wood as it is fed through it. You can adjust the depth of the cut b using the crank at one end of the planer.

 

Another important feature that you should consider having in your surface planer is a dust vacuum. This machine generates a lot of dust, so having a dust collection system in place with lengthen its life. This machine is quite noisy when it is at work, so always wear hearing protection when you are using it. If not used with care, it can be dangerous too. So, adhering to the safety precautions is of prime importance.

 

  1. The Router:

 

Every professional woodworking will have a router in his workshop. It is one of those wondrous pieces of woodworking machinery that can carry out a number of tasks for you – not only trimming and decorative edge treatments but also various joints like mortises, rabbets, and dadoes. By having a router in your workshop, you are adding versatility in your woodwork. By making use of patterns, you can create identical parts from wood.

 

A router makes use of various bits to produce a number of shapes. For beginners, a stationary base router is good enough. It will help you make cuts at a depth you make before making a cut. For advanced woodworkers, a plunge router can add a creative touch to the work. The plunge router bites into the wood, makes the cut and then allows you to lift it back. When choosing a router, choose one that is at least 2 HP or it won’t be powerful enough to carry out various tasks for you. You should also choose one that comes with variable speed. Collet size is another feature to consider. It is important if you want to use various bit sizes. It is important to remember that smaller bit can be put into larger collet size but not vice versa. The power should be within the reach of your fingers, and you should not need to take your hands off the router to switch it on or off.

 

Other than these 3 woodworking machinery, there are a few other power tools that you can consider buying. One is a good jigsaw. It is a very useful tool that can help you in varied tasks like cutting curves. When buying one look out for one that comes with blade guides as it will help in keeping the deflection of the blades to a minimum. Apart from that a handheld drill and a quality random orbit sander with a provision for dust collection are great power tools to have in your arsenal. Quality of these tools should always be of prime importance when choosing these tools and one should always remember to adhere to the safety norms while using them.

 

Learn more information about woodworking machines, try to visit TRUPRO-TEC: www.trupro-machine.com. The professional manufacturer of metalworking machines, woodworking machines, and metal forming machines etc.

 

 

Article Source: https://www.mikeswoodworkingprojects.com/3-must-woodworking-machinery-every-workshop/

How to Shut Off Your Home Gas Supply Valve

Posted on by

Shutting off utilities such as your home’s water supply or electrical power is fairly common—something you do whenever making a repair or upgrade. Shutting off your natural gas supply is not something that occurs very often, but there are still times you may need to shut off the gas supply in your home. Knowing how to do this is important, because when it’s necessary, it may need to be done in a hurry.

 

Reasons for Shutting Off the Gas

The main shutoff valve controlling you home’s natural gas supply may come into play during major construction or renovation involving gas lines, when closing up or shuttering a home, to prevent possible flood damage. Or, in rare instances, you may need to shut off the gas valve when a gas leak is suspected inside the home.

 

Once the valve is turned off, however, do not turn it back on by yourself. It must be turned on by a qualified person such as a gas company service technician or a licensed plumber. To be a “qualified person,” you must be able to confirm proper operation of all pilot lights and gas appliances once the gas valve is turned back on.

 

Location of the Main Shutoff Valve

The main gas shutoff valve is located next to the natural gas meter supplied by your utility company. Your gas meter may be located outside your home on an exterior wall, or it may be found inside your home on an outside wall—often in a basement or utility area, such as a garage or the mechanical room where the furnace or water heater are located.

 

How to Shut Off the Main Gas Valve

The main gas shut off valve is a large valve located next to the natural gas meter. If the valve handle is parallel to the gas pipe, then the gas supply valve is open and the gas is on.

 

  1. To close the valve, use a clamping plier, an adjustable wrench, or an open-end wrench, and turn the valve handle 90 degrees so it is fully perpendicular to the gas line. It is a good idea to keep a wrench handy for this purpose and keep it located next to the shutoff valve.

 

NOTE: Many natural gas meter valves provided by a utility company have a hole in the handle that will line up with a corresponding hole in the valve body when the gas valve is in the closed position. The utility company will use the hole to lock and/ or seal the valve in a closed position when the gas account is closed. When the holes in the valve handle are lined up, it indicates the valve is in the OFF position.

 

  1. To ensure sure the gas shutoff valve is, in fact, fully closed, note the dial numbers on the meter face and write them down. Then check back in about 10 minutes. If the numbers have not changed, then you know that the shutoff valve is fully closed.

 

If you want to gain more information about shut off valves, I recommend that you can visit Alpha Brass Controls: www.alphabrass.com. Their on / off valves are manufactured from the best quality Brass and verified and tested under the highest quality standards. All Alpha Brass Controls valves are 100% MIT and 100% leakage tested to ensure the standards of quality and safety. More details, try to send inquiry to them.

 

 

Article Source: https://www.thespruce.com/shut-off-home-gas-supply-valve-4125745