Forklift Truck Safety Training is Critical

Posted on by

Forklift Trucks are commonplace around construction sites, warehouses and factories. But these powered industrial trucks can be deadly if used improperly, and they require respect and diligence for safe operation.

 

About 35,000 serious injuries and 62,000 non-serious injuries involving forklifts occur every year in the United States, according to the Washington State Department of Labor & Industries. Forklift operators at heightened risk of injury or death include those who:

 

  • Have not been trained in the principles of physics that allow forklifts to lift heavy loads
  • Are unfamiliar with how a particular forklift works
  • Operate a forklift carelessly
  • Use a forklift despite the machine having missing parts or unapproved alterations

 

Forklifts may be powered by batteries, gasoline, diesel or propane, and come in multiple sizes. Some forklifts have drawbars so they can pull weighty loads, and others have booms and attachments that allow them to lift heavy objects.

 

Regardless of the type of forklift, one thing holds true: All forklift operators must be trained. “An untrained forklift operator can be as dangerous as an unlicensed driver of a motor vehicle,” Washington L&I states, adding that “state regulations require the employer to ensure that a forklift operator is competent to operate the forklift he or she is assigned to use.”

 

Follow The Rules

Drivers must know and adhere to all safety rules when operating a forklift. One critical rule operators should never forget? Always wear your seat belt. Failure to do so can result in an operator being thrown outside a forklift’s protective cage in the event the truck overturns.

 

To help prevent a forklift from tipping over, falling to its side or dropping its load, Washington L&I recommends a number of tips:

 

  • Ensure a load is completely stable and safely secured on the forks before operating the forklift.
  • Keep loads low to the ground when traveling.
  • Keep a load uphill when moving up or down an incline.
  • Drive slowly when conditions are wet or slippery.
  • Slow down when making turns and honk the horn if traffic is encountered.
  • Never allow unauthorized workers to ride on a forklift, and refrain from engaging in horseplay when operating one.

 

Learn more information on how to safely operate a forklift, including how a forklift works, a pre-use inspection checklist, and rules for loading and unloading to have a safe working environment.

 

Article Source: http://www.safetyandhealthmagazine.com/articles/15812-forklift-safety-training-is-critical

Looking for The Best Archery Equipment Supplies

Posted on by

Archery equipment comes in all shapes and sizes and it is important for you to get the right kind for your needs. You can purchase a bow and arrows as well as all the other archery supplies and accessories online. This is a great way to shop because you can do it from the comfort of your own home. Before you do that however, you have to make sure you are getting the right products to avoid wasting money.

 

One of the first things you need to think about before you buy archery supplies online is compatibility. Different manufactures make different archery related products that follow the industry rules without necessarily being exactly similar. As a result, you may end up purchasing a bow and arrows or any other supplies that cannot be used together properly if you purchase them from incompatible brands. You bear the responsibility of making sure that such a thing does not happen because you may fail to get a refund and thus have wasted your money.

 

Another way of ensuring that you get what you need is to compare the prices of the items you are interested in purchasing. Plenty of online stores offer different brands of archery supplies at different price rates. You have to ensure that you shop around and get the best deal there is in terms of prices and brands. You can get products well within your budget this way.

 

In order for you consider yourself as having gotten the best financial deal possible as far as buying supplies for your archery equipment is concerned, you also have to consider the quality of items you are getting. Buying a low quality supply set for your archery equipment at a low price is not as good a deal as getting a high quality archery supply set at competitive market prices. This because high quality supplies and accessories last longer and have less maintenance costs as compared to their low quality counterparts which may need to be repaired or replaced often. As a result, high quality supplies end up being lower in terms of general associated costs in the long term, which is a great deal for any perceptive buyer.

 

Client reviews and testimonials will come in handy in ensuring you get the right kind of information if you want to buy archery supplies online. This is because they are written from the perspective of people who have experience dealing with different brands of products of this kind. You will be able to access the best products that are well worth your money if you pay attention to this information.

 

Man Kung has manufactured archery equipment since 1988, and which make them an experienced archery supplies manufacturer in the industry. Mainly products include: crossbow series, crossbow accessory, archery bows, archery bow accessory and archery toys. Need more information about archery equipment series, welcome to visit the website of Man Kung and feel free to contact with them!

 

 

 

Article Source: http://EzineArticles.com/7892968

Lots of elastane in the products, and do you know why and how it effects the products?

Posted on by

Elastane was developed as an alternative to rubber in the 1950’s and is a thermoplastic polyurethane synthetic fiber. The unique property of this elastomer, as a result of its randomly coiled polymer structure made up of a mix of stiff and flexible segments, is that it can be stretched 500% or more without breaking or permanently deforming. Giving it the well-known characteristic of the ability to revert to its original shape after being stretched. The long amorphous segments in elastane create the elastic properties and the short rigid segments provide the structure when the fiber is stretched and released. Elastane has the highest stretch tension of all textile raw materials.

 

Elastane is soft, lightweight and abrasion resistant. Elastane is used where a high degree of permanent elasticity is required, as in tights, sportswear, swimwear and in woven and knitted fabrics. Adding elastane just for couple of percent makes fabrics more comfortable to wear. Elastane is always used in a blend with other fibers.

 

Elongation on an elastane yarn is much higher than on a more rigid yarn, like polyamide on Lymed fabric. When stretching a knit, the elastane yarn would practically never get to its limits of the elongation. This means, in most cases, that the elastane would not determine the ultimate elongation in the knit- determination is made by the rigid yarns in the fabric. Also, the construction of the knit has effect on the stretchability- looser the knit, stretchier the fabric.

 

More elastane content in a fabric does not mean that the fabric will have more stretch. By increasing the elastane content in the fabric, more resistance to stretch is created using the elastomeric material. More elastane means more powerful fabric.

 

Maw Chawg Enterprise Co., Ltd. can offer some related information about elastane yarn and other textiles to you. Welcome to visit Maw Chawg’s website to see what textile series they can offer you!

 

Article Source: http://lymed.fi/en/ufaqs/tuotteissanne-on-paljon-elastaania-miksi-ja-miten-se-vaikuttaa-tuotteisiin/

 

Article Source: https://www.wools.co.uk/elastane-lycra-.html

Main Features and Benefits of CNC Milling Machine

Posted on by

CNC (Computer Numerical Control) milling machine is one of the common machine tools in machinery industry. It is the popular form of CNC that can perform those repetitive tasks of drilling and turning that used to be human jobs long time ago.

 

CNC Mills are classified based on the number of axes that they have. Axes are labeled as x and y for horizontal movement, and z for vertical movement.

 

Basically, this milling machine has four axes which are Milling Head Z, Table Z, Table Y, and Table X. The quantity of axes it has is often presented in many different ways.

 

For example, there is a five-axis machine. The extra 5th axis is in the form of a horizontal pivot for the milling head that ensure the excellent flexibility of machining with the end mill at an angle follow the table.

 

It is usually programmed by using a series of standard commands that we named it as G-codes to represent specific CNC tasks in alpha-numeric form.

 

There are many different sizes for this machine based on the purpose and location of usage, as well as the materials that need to be cut.

 

Besides that, the size of motor affects the speed of cutting the materials. Normally, materials like plastic and wood are the easiest things to cut, unlike steel that need stronger milling machine and longer time.

 

To evaluate the performance of milling, we can look at its rigidity. For example, the more rigid a mill is, the more precisely it drills and cuts. CNC mills normally have better & tougher engines for higher rigidity compared to manual counterparts.

 

With CNC milling machine, we can improve the speed of cut compared to manual operation. It also reduced the rejection when rigidity results increased. Thus, in long run business, it will indeed save a lot of time and overhead due to less wastage happened.

 

Another benefit is the accuracy of cut through CNC milling machine with a computer numerically controlled machine. In production line, it is very important to have all the parts produced exactly the same. However, nothing is perfect. CNC milling machine may also have a possibility of fault lies in the operator due to a mill can cut with absolute precision as close as.0001 of an inch.

 

In addition, many mills have beds that are able to move at different angles for easy cutting jobs, different angled cut as well as more difficult drilling operation. This is one of the benefits over manual mills.

 

Lastly, with the automated cooling systems, it is able to maintain the quality of raw material by spraying or blasting the hot metal or even tooling with specially formulated coolant.

 

With the benefits of CNC milling machine stated above, it is really worth the money to invest a CNC milling machine for your business use. And there are the popular brands that available in the market, such as Mori Seiki, Dahlih, CNC Takang, DMTG, Mastika, HACO, Takisawa, Okamoto, Creator, Agma, L & L, Hurco, Okuma, Extron, Enshu, Equiptop, Komatsu, Jiuh Yeh.

 

For more information about machine tools like CNC milling machine in Taiwan, please visit the website of Jiuh Yeh Precision Machinery Co., Ltd. They are the manufacturer of specializing in bed milling machine and other machinery.

 

 

Article Source: http://EzineArticles.com/5335304

Understand More Information About Gearedmotors

Posted on by

Adding a gear-train to the output of any motor will reduce the speed, while simultaneously increasing torque. Gearing can be added to any type of motor. There is no need to waste time designing a geartrain and sourcing all the parts. Chances are, there is a gearmotor solution that you can drop right into your design.

 

Gear train construction ranges from simple plastic drive-trains for toys to beefy metal gear-trains for extra-high-torque applications. Gear trains can be mated to brushed or brushless DC motors as well as steppers. Gear-train modules in a variety of gear ratios are available to fit standard NEMA sized steppers.

 

Applications:

  • Robot Drive Trains
  • Radio Control Vehicles
  • Cordless Tools

 

Advantages:

  • Speed Reduction – Many DC motors simply run too fast to be useful in direct-drive applications.
  • Increased Torque – A lot of work can be coaxed from a relatively small motor if fitted with a suitable gear train.

 

Limitations:

The potential downsides of adding a gear train to a motor include:

 

  • Friction – This is especially a problem with low-cost plastic gear trains used with low-voltage motors. The extra resistance can make these gear-trains balky at low speeds.
  • Inertia – This is more of a problem with metal gear-trains. All that additional rotating mass can inhibit rapid acceleration.
  • Backlash – Any sloppiness in the gear-train tolerances create slack that must be taken up whenever the direction reverses. This can be a problem in precision motion control applications.

 

High-end precision gear-trains can be optimized to minimize any or all of these disadvantages. But be prepared to pay a premium price for them!

 

Hsiang Neng’s geared DC motor is widely used by various applications, such as magnetic bike, vending machine, game player, instrument and appliance, massage tools, stage spinning light, auto shutter, auto mah-jongg table, medical equipment. The DC gear motor is designed and manufactured in high precision and superior quality. If you are interested in learning more information about gearmotors, welcome to contact with Hsiang Neng.

 

 

Article Source: https://learn.adafruit.com/adafruit-motor-selection-guide/geared-motors

Taiwan PVC Mesh Fabric Supplying Expert – Jiunn Jang Textile Co., Ltd.

Posted on by

Established in 1975, Jiunn Jang Textile Co., Ltd. is the company of primarily engaging in developing industrial textiles and fabrics in various forms and types. And we also accept customer orders for woven and knitted fabric meshes, primarily used by bag and shoe manufacturers.

 

At the time when the world market is demanding high quality products and in order to satisfy customers with innovating and outstanding product value, we have continued to develop new types of PVC mesh fabric, nylon mesh, polyester mesh, as well as many other industrial fabrics.

 

Today, we will tell you some information about Jiunn Jang’s PVC mesh fabric.

 

PVC Mesh Fabric As Shoes Material
Nylon Mesh for Shoe MaterialNylon Polyester Mesh for Shoe Material
There are three kinds of fabric used for shoes material.

 

First, the mesh fabric which is made of nylon or polyester yarn is very breathable. Besides the normal color, some of them can also be metallic silver color.

 

The second one is similar carbon fabric. It looks like carbon, but it is made of nylon or polyester yarn. So, it is called similar carbon fabric.

 

The third one is spandex fabric. Its characteristics are flexible.

 

As the leading industrial fabrics manufacturer, Jiunn Jang insists to supply you the best products. You can believe our product quality. If you need further details about PVC mesh fabric or other mesh fabrics, welcome to visit Jiunn Jang’s website to see what excellent quality fabrics we can offer you.

 

 

Jiunn Jang Textile Co., Ltd.

No.422 Sec.1Doou Chong RD. Tien Chung Chen Chang Hua Hsien Taiwan R.O.C.

TEL: 886-48762686, 8742082

FAX: 886-4-8742780

Hydraulic Modular Valves and Manifolds

Posted on by

Valves are normally mounted onto a valve skid with piping at the rear, or underneath, to allow quick changes to be made for maintenance purposes. Piping can, however, be dispensed with almost totally by mounting valves onto a manifold block- with interconnections formed by drilled passages in a solid block or by cut-outs on a plate-formed manifold.

 

Modular valve assemblies allow piping to be reduced still further. These follow standards laid down by the Comit~ European des Transmission Oleophydrauliques et Pneumatiques and are consequently known as CETOP modular valves.

 

Modular valves consist of a base plate, shown in Figure 4.45a, and a wide variety of modules which may be stacked up on top. Figures 4.45b to d show some modules available. At the top of the stack a spool valve or crossover plate is fitted. Quite complicated assemblies can be built up with minimal piping and the ease of a child’s building block model.

CETOP Modular Valves

 

Mentioned modular valve, I can recommend you to visit the website of ASHUN if you are interested in learning more information about valves. Ashun was established in 1984 as a manufacturer for hydraulic and pneumatic products. For the hydraulic valves, they have 01 series modular valves, directional control valves, pressure control valves and flow control valves. Especially 01 series modular valves which can be afforded high pressure (31.5MPa) and large flow (40L/min).

 

Need further details about modular valves, please feel free to contact with ASHUN.

 

 

Article Source: http://www.valvehydraulic.info/valve-2/hydraulic-modular-valves-and-manifolds.html

Guide On How To Buy A Laser Cutting Machine

Posted on by

A laser cutting machine is a machine that uses laser lights to cut through different materials such as metal, wood, textiles, acrylic among many others. When it comes to metal cutting, you can use it to cut different types of metals such as stainless steel, steel, and aluminum.

 

Laser cutting is preferred by many people as its accuracy, has a very small kerf width, yields excellent cut quality, and has a small heat effect zone.

 

For you to buy the right machine you need to consider a number of factors:

 

Function

 

How will you be using the machine? You can use the cutting machine for two main functions: cutting and engraving. As mentioned, you can use it on different materials. The materials have different specifications; therefore, before you head to the stores you should decide on how you will use your machine.

 

Bed size

 

The bed size of the machine determines the amount of work you can do. The bed size varies from A3 to A1 where the bigger the size, the more the work that your machine can handle. The bed size is a permanent feature; therefore, you can’t change it in the future.

 

The decision should be based on the amount of work that you are planning of handling. For example, if you are planning of handling large projects you should go for a machine with a large bed.

 

Optic quality

 

The quality of the optics is the one that determines how well the machine performs. Many unknowledgeable people think that the wattage is the one that determines how effective the machine works, but this isn’t true.

 

When making the purchase you shouldn’t bother with the amount of power that the machine consumes-you should concentrate on the quality of the optics.

 

To determine the quality of the optics you should ask the seller to demonstrate how the machine works on different materials and settings.

 

Ease of use

 

If you are a new buyer you most likely don’t know how to use the laser cutting machine. A good machine should come with an easy-to-follow manual. The manual should not only show you how to use the machine, but also how to undertake minor repairs.

 

Conclusion

 

These are tips on how to buy the right laser cutting machine. Although, the machine is designed to cut different materials, you should avoid cutting plastic with it as plastic tends to give off chlorine gas which is harmful when you breathe it.

 

As a reputable manufacturer with over 35 years of experience, Tailift offers to our clients a wide range of Laser Cutting Machines. Their Laser Cutters are designed for a wide range of metal working applications. Learn more information about laser cutting machines, welcome to contact with Tailift right away.

 

 

 

Article Source: http://EzineArticles.com/9274665

Introduction of CNC Mini Lathe Machine

Posted on by

The CNC Mini Lathe is a perfect addition to any shop. It can be used to train employees on how to use CNC technology or how to just operate it manually. The mini lathe machine will usually incorporate both CNC technology and manual operation. Not only is this a great learning machine, but it also works well for the hobbyist.

 

Lathe machines are designed to operate with wood, aluminum or brass. The mini machines work on the same basis as its grown counterparts. Even though you will not be able to the type of work with a mini machine that you would with a large lathe machine, as in long runs, etc, you will still be able to create projects on the same basis. Carve, etch, taper, you name it, the CNC mini lathe can still do it.

 

The great thing about CNC technology is that with the software program you can recreate any project over and over. It could be years in between that same specific project and all you have to do is download the same software again and the project will turn out to the exact same measurements and specifications as the original.

 

Many people create their own versions of the mini lathe machine. Homemade DIY mini CNC machines can be created, but you must have some sort of knowledge about how the CNC technology works, computers, circuitry, the different axes that is used, etc. There is actually quite a bit of stuff that goes into a computer numeric controlled machine that incorporates robotic technology.

 

CNC mini lathes come in a variety of sizes, believe it or not. Some offer higher rpm rates. They usually operate on two or three of the axes and those are X, Y and sometimes X, Y, and Z. By knowing about the different axes and the type of movements that can be created using a combination of the axes, you will really be able to create some amazing projects.

 

Most of the time the program interface that is used with CNC mini lathes is very simple to operate and you can find the ones that even operate off of Windows. Different graphic programs can be used and then turned into a program that the machine will then duplicate. Just imagine all the different things that you can do with this sort of technology.

 

A variety of different manufacturers offer versions of the mini lathe machines and if you have any questions all you have to do is contact them. They can help you to even determine what size of the mini lathe machine would be perfect for you.

 

Jenn Wei Machinery Co., Ltd. is the company of specializing in CNC mini lathes and other lathe machines and turning centers. If you are interested in learning more information about mini lathe machines, try to visit Jenn Wei’s website, you’ll find out the details you want to know.

 

 

Article Source: http://EzineArticles.com/3057235

Denison Hollow Vane Manufacturing Specialist – Mountop Precision

Posted on by

Denison Hollow VaneEstablished in 1979, Mountop Precision began by providing clients with heat-treatment finishing work, specializing in heat-treatment of high-speed steel and steel molds. Denison hollow vane just is the products that we can offer you.

 

Denison Hollow Vane is one of the double lips vane series, which featuring high quality and durable. Customize Denison hollow vanes are also welcome. Try to check out Mountop’s website to find the information you need. Feel free to contact with us if you are interested in learning more details about double lips vanes or other pump vane series!

 

Show you Mountop’s Denison Hollow Vane Specification

 

  • Material: SKH51, M2, High Speed Steel
  • Hardness: HRC 60°~65°
  • Precision: 0.003~0.005mm or custom-made is acceptable.

 

 

Mountop Precision Industrial Co., Ltd.

No. 1, Alley 36, Lane 229, Chung Shan Rd., Sec. 1, Wu Jih Dist., Taichung City , Taiwan, R.O.C.

TEL: 886-4-23377188

FAX: 886-4-23370317

E-mail: vaneinfo@mountop.com.tw