Introduction of TPU Coated Fabric – Jiunn Jang Textile Co., Ltd.

Posted on by

Nowadays, more and more people focus on the environmental issue. People use more products which are harmless than they did before. Also, due to the progress of technology, people try to do something that can be more efficient and more competitive. So, Jiunn Jang has developed a product, called TPU Coated Mesh.

 

Our product, TPU coated fabric, is used Polyester Yarn with TPU coating. TPU (Thermoplastic polyurethane) is a kind of environmental and harmless Thermoplastic Elastomers with many properties, including elasticity, rigidity, and wear resistance. Also, the polyester inside TPU is High Tenacity. So, the mesh made of TPU coated polyester is with good resilience, high abrasion resistance, and well shaping.

 

Also, TPU coated fabric is good material that can be used to automatically produce an integral plastic vamp. It makes production automated for manufacturing the light, breathable, and fit vamp. It will also replace the mass of manpower with machine and change the footwear industry from labor intensive to technical intensive level. That will increase the production efficiency, reduce the loss, and enhance the competitiveness.

 

TPU coated fabric is material that is good for the environment, and its well shaping property can let the production be economical and competitive.

 

TPU fabric is one of Jiunn Jang’s popular products, not only environmental but fashion on shoes. Many customers are asking about this material. If you are also interested in TPU coated fabrics, welcome to contact us for more information.

 

 

Jiunn Jang Textile Co., Ltd.

No.422 Sec.1Doou Chong RD. Tien Chung Chen Chang Hua Hsien Taiwan R.O.C.

TEL: 886-48762686, 8742082

FAX: 886-4-8742780

Features and Overview of Polygon Machines

Posted on by

Polygon machine is a unique machine tool designed to machine polygonal components or to enable multiple grooving by turning a cutter and a workpiece at the ratio of 2:1 based on the cutting principle of specific characteristics.

 

For hexagonal machining, for example, three cutters are mounted on the hexagonal machining cutter holder, a blank is chucked, and then the starting button is pressed. Afterwards, all procedures are performed automatically in one process, and the machine stops quickly in its original position.

 

Likewise, for polygon machining of one face, two faces, rectangles, octagons, etc., as well as multiple grooving are efficiently performed. Odd numbers of faces and clutch machining are also possible.

 

Features of Polygon Machines:

 

  1. Quick machining

No indexing is required. Compared with milling machines, polygon machines can process 3-5 times faster, while achieving a more accurate index angle.

 

  1. Beautiful finish

A beautiful surface finished with straight cutting lines can be achieved by cutter bits, thereby improving and the commercial value and quality of machined components.

 

  1. Accurate machining

A collet chuck is generally used, ensuring a high dividing accuracy.

 

  1. Simple operation

All you have to do is chuck a blank and press a button to start the machine, and then all operations are performed automatically.

 

  1. Speedy setup change

Easy and quick setup change. Also suitable for producing a wide variety of components in small quantities.

 

  1. Unmanned operation also possible

An automatic blank feeding system can be installed for mass production, and unmanned operation is also possible.

 

  1. A well-organized after-sales service system

Polygon machines have proved successful, have been favorable evaluated, and are relied upon by many users in Japan, and around the world including Europe, North America, South America, Taiwan, Korea, and other Asian countries.

 

Established in 1987, Chien Yih Machinery Co., Ltd. is the manufacturer of special purpose machinery and automatic polygon machines, including both ends simultaneous cutting CNC lathes (fastcut lathe), polygon CNC lathes, CNC polygon machine with turning function, twin spindle CNC lathes which attracting.

 

One of Chien Yih’s high quality machinery is CY-6501/6511 model polygon machine which is with rigid construction, high performance, and functions all in one. And its wide cutting range applies to even number polygon cutting, eccentric cutting, profiling cutting and 2 phase cutting etc.

 

If you need more information about our polygon machines or other cnc lathes, welcome to contact Chien Yih. We are very pleased to be of service to you at any time.

 

Article Source: http://www.nittopolygon.com/11polygon.html

 

8 Unbelievable Things You Never Knew About the Best Water Purifiers for Home

Posted on by

The fact 70% of our body is made up of water is enough to make us realize that how important this element is for our health. Apart from carbohydrates, proteins, lipids, vitamins and minerals, water is that sixth essential nutrient which our body needs the most. That is why it is said that one must have eight glasses of water in a day. Since everything has gone impure these days, so it is imperative to consume clean water by any means and this is the reason why people want the best water purifier for home.

 

Today, there is no need to move from shop to shop in search of the best quality filters as now you can buy water purifiers online. Although web gives you complete product review, but even then people consider price over quality. They don’t know what they are leaving just for the sake of its high cost. Here are some of the incredible things that the best water purifier will offer you:

 

  1. Improved Digestive System: The biggest benefit of bringing home the best water purifier is that it protects you from those acute stomach problems and improves your digestive system. It makes it easier for the food to move through your intestine, in a way keeping your stomach light and soft.

 

  1. A Glowing Skin in Just Two Glasses: Water purifiers are designed to remove the unwanted impurities from polluted water and make it safe for drinking. Just two glasses of pure water will impart a gleaming look to your face, ending your entire acne and blemish problem in just few days.

 

  1. Bulkiness is Not an Issue Now: With the best quality water purifier in your home, there is no need to go to the gym for those strenuous physical exercises and now you can lose weight by just drinking purified water only. This zero calorie liquid will excellently curb your desire to eat more, thus reducing your appetite in an interesting way.

 

  1. A Strong Immune System: A clean drinking water not only makes you physically fit, but internally strong as well. It strengthens up your immune system by flushing out all the toxins and various body illnesses, starting from the common cold to kidney stones. Thus, filtered water is the best way by which you can purify the blood in your body, excreting out all the harmful wastes.

 

  1. Healthy Muscles: Intake of pure water will lend you healthy and happy muscles. As your muscles comprises of 75% water so these water purifiers are simply the blessings for all those who are in love with their body. So no more muscle cramps, sprains or other pains in the body, just a fit physique.

 

  1. The Right pH Balance: It is only the water, which can maintain the pH balance of your body. Drinking purified water can definitely make things better. Since any rise or fall in the pH levels can lead to serious consequences, so drinking water from the water purifier will protect your body from such pH imbalances.

 

  1. No Headaches! No Fatigue: Pure water is a sure shot solution to get relieved from those acute headaches and fatigue feelings. Therefore, switch to the best water purifiers and overcome this situation permanently.

 

  1. Heart Attacks and Cancer Risks are Reduced: Consuming clean, filtered water every time reduces the risk of heart attacks and cancer cells in your body. Research says that drinking water in large amounts not only decreases the risk levels of these fatal ailments, but also keeps the blood flow regulated.

 

So, if you are looking to buy a water purifier online and are leaving the one just because of its high price, then do consider its above listed benefits before taking any decision. One right choice can make your life heaven.

 

Established in 1984, Triwin accumulated years of experience in manufacturing water purifier and other water treatment equipment. If you need more information and specification about water purifier series, welcome to visit the website of Triwin and feel free to contact us.

 

Article Source: http://EzineArticles.com/8723576

 

Experienced Badge Holders Manufacturer in Taiwan – Tay Young

Posted on by

Established in 1969, Tay Young Badge Holders Manufacturer is now one of the leading suppliers and marketers of advanced technical skill and modern facilities. Our products are now sold in different countries global. TAY YOUNG’s ID Badge Holders have high quality, competitive prices and prompt delivery competitive advantage. If you are interested in our badge holders, welcome to visit our website to learn more vinyl badge holders and custom plastic badges holder specifications. Tay Young would be your best partner in the future.

 

In badge holder series, Tay Young provides vinyl badge holder, rigid badge holder, and custom print badge holder for customers to choose. Pictures of our products are below and further details please visit our website.

 

Vinyl Badge Holder
Vinyl Badge Holder

                                                       Rigid Badge Holder
Rigid Badge Holder

Custom Print Badge Holder
Custom Print Badge Holder

For any further inquiry or suggestion, please feel free to contact with Tay Young and you will sure find it worthwhile.

 

TAY YOUNG Industrial Co., Ltd.

61 Lane 300, Changnan Road Sec. 1, Changhua 50076 Taiwan, R.O.C.

TEL: + 886- 4-732 4919

FAX: + 886- 4-738 6322

E-mail: sales@tayyoung.com.tw; ty919@ms2.hinet.net

2017 Taiwan Excellence Award: F-360 Fully Automatic Band Saw EP-330S HI-TECH BAND SAW

Posted on by

2016-12-30_134355

↑ Fully Automatic Band Saw (F-360)

 

b

↑ HI-TECH BAND SAW (EP-330S)

Fully Automatic Band Saw (F-360) and HI-TECH BAND SAW (EP-330S) have been internationally recognized by “25th Taiwan Excellence Award”, excellent cutting stability, sawing the decline of high performance.

 

EVERISING F-360, the full-cover automatic band saw, is referred the machine from the US and Europe to see how to make the machine look fashion and safety. At the same time, we also think the machine safety and improve the machine to be more energy efficient and environment friendly

 

EVERISING EP-330S, the hi-tech band saw machine, is referred the machine from the US and Europe to see how to make the machine look fashion. At the same time, we also think the machine safety and improve the machine to be more energy efficient and environment friendly.

 

For more information, please visit www.everising.com

 

How Do Trigger Sprayer Bottles Pump Fluid?

Posted on by

Trigger sprayer bottles are an extremely useful type of machine and an excellent demonstration of basic plumbing principles. A spray-bottle head is made up of only a few parts. It has a trigger lever, which activates a small pump. This pump is attached to a plastic tube that draws cleaning fluid from the bottom of the reservoir. The pump forces this liquid down a narrow barrel and out a small hole at the gun’s muzzle. The hole, or nozzle, serves to focus the flowing liquid so that it forms a concentrated stream.

 

The only complex element in this design is the fluid pump, and it’s about as simple as they come. The main moving element is a piston, housed inside a cylinder. Inside the cylinder, there is a small spring. To operate the pump, you pull the trigger back, pushing the piston into the cylinder. The moving piston compresses the spring, so when you release the trigger, the piston is pushed back out of the cylinder. These two strokes of the piston, into the cylinder and out again, constitute the entire pump cycle.

 

The downstroke, the piston pushing in, shrinks the area of the cylinder, forcing fluid out of the pump. The upstroke, the spring pushing the piston back out, expands the cylinder area, sucking fluid into the pump. In a spray bottle, you need to suck cleaning fluid in from the reservoir below and force it out through the barrel above. In order to get all of the fluid moving through the barrel, the pump must only force the fluid up — it cannot force the fluid back into the reservoir. In other words, the fluid must move through the pump in only one direction.

 

The device that makes this possible is called a one-way valve. A trigger sprayer bottle has two one-way valves in the pumping system: one between the pump and the reservoir and one between the pump and the nozzle. Typically, the valve between the pump and the reservoir consists of a tiny rubber ball that rests neatly inside a small seal. The sides of the seal are angled so that the ball won’t fall through. Depending on the design, either gravity or a small spring holds this ball against the seal so that the water passageway is blocked off when you are not pumping. When the piston moves out (when you release the trigger), the expanding area of the cylinder sucks on the fluid below, pulling the ball up out of the seal. Since the ball is lifted up, fluid is free to flow from the reservoir. But when you squeeze the trigger, the outward force of the moving fluid pushes the ball into the seal, blocking off the passageway to the reservoir. Consequently, the pressurized fluid is pushed only into the barrel.

 

Living Fountain Plastic Ind. Co., Ltd. is the professional trigger sprayers manufacturer in Taiwan. We manufacture various products including treatment pump, dispenser pump, shower pump, PET preform, PP bottles etc. If you are interested in and need further details about trigger sprayer series products, welcome to visit the website of Living Fountain to learn more information. And feel free to contact us.

 

 

Article Source: http://home.howstuffworks.com/question673.htm

Overview and Advantages of Vertical Broaching Machine

Posted on by

Vertical broaching refers to the type of machine that is used to broach a piece part. Vertical broaching machine is typically used to cut external slots, shapes, and forms. Each application of vertical broaching usually consists of a custom made tooling package, and a fixture to hold and secure the piece part. An example of a vertical broaching application would be cutting a deep slot in a large industrial valve stem.

 

Vertical Broaching Advantages

 

  • Typically faster than traditional horizontal broaching methodology, without compromising length or size of cut
  • Machinery can be specifically matched to the part being cut, for a more efficient cutting operation
  • Well suited for cutting external shapes and forms quickly, while still holding close tolerances
  • Extremely economical cutting process, very often superior to milling
  • Tooling can be modular in design, allowing for variations of the same basic cutting pattern
  • Different cutting operations can be optimized on the same dual ram machine

 

Vertical broaching machines come in many varieties and adaptations, but in general any machine in which the ram is mounted vertically, instead of horizontally, is classified as a vertical broaching machine. In the case of surface broaching, the ram, which carries its broaching tools mounted in holders, typically moves past the piece part. The piece part is secured in a fixture using hydraulic or mechanical clamps. Some traditional vertical broaching machines are dual ram, meaning that there are actually two rams mounted on the same machine, and sharing the same hydraulic and mechanical systems. In many cases the part is secured in a shuttle table or swing table, so that the operator can load one piece to be machined, while the other ram is cutting another piece at the same time. Dual ram vertical broaching machines can also be used to cut two or more successive operations on the same part.

 

Vertical broaching machines can also be used to cut internal shapes and forms, and can perform very much like traditional horizontal machines. In each case either the piece part is secured while the broaching tool moves past it, or the broach itself is secured while the piece part travels on a table. The former type of machine can be either of the vertical pull-down or pull-up variety (referring to the motion of the broaching tool). The latter is typically referred to as a table-up vertical broaching machine.

 

As the professional broaching machine manufacturer in Taiwan, Axisco is dedicated in manufacturing wide range of broaching machines, including horizontal broaching machine, vertical inner diameter broaching machine, vertical outer diameter broaching machine and universal broaching machine. The vast amount of experience in special purpose machine field enables us to offer innovative turn-key solutions in broaching. If you are interested in and need more information about vertical broaching machine series, welcome to visit the website of Axisco to learn more details.

 

Article Source: http://www.vwbroaching.com/vertical-broaching.html

LED Bicycle Lights for Safer Night Time Rides

Posted on by

Bicycle enthusiasts know what it’s like to travel at night. The risks of a mishap occurring is much higher than when traveling in day time. Of course very early on, we have come to rely on LED bicycle lights for lighting our way and warn other commuters of your presence on the road.

 

Why LED?

 

Brightness – Ever since light bulbs were created, they have continued to evolve. When halogen bulbs came around we were duly impressed by their brilliance and everything that said “Halogen” was considered high-end. More brightness came when LEDs gained notoriety. Compared to the old halogen bulbs, LEDs provided at least 10 times MORE candlepower. Not only that but they are also winners in conserving energy and durability as I will explain further on.

 

Energy saving – The conventional flashlight bulb or halogen bike bulbs that we were so impressed with before would give out about six to 10 hours, depending on usage, of light. However, the energy needed by LEDs to provide light while cycling is much less than that. In fact, they lasted close to 100 hours. This comparison is made by using four double A batteries for both types of light source. The halogens had a combined output of 300 candlepower whereas the LED had an output of 1,500 candlepower!

 

Replacements – Do you still remember how we were so used to changing flashlight batteries practically on a daily basis? And if that give us light, we also know what the other problem is too, right? You would have to replace either your battery set or pack or perhaps your light bulb. Compounding that problem is the availability of the bulb, or spares batteries for that matter. You would have to stock up on both just to ensure you will have consistent lighting on your bike. With LEDs, all those problems are a thing of the past. Since they use much less energy, they last a lot longer and they never burn themselves out even as the power fluctuates when the batteries are near empty.

 

Now how does all this information relate to a cyclist?

 

Confidence – With so much illumination and time before it dies off due to power drain, you’d never have to worry about your lights. In all likelihood, you would have no more energy to go on and your bike’s light would still continue to shine way ahead of you.

 

Safety – Now that you’re confident about your lights, you will have more time to focus on what’s really important – getting from one point to another safely. Furthermore, because of the bright luminescence, you will be always visible even from afar by either oncoming or following vehicles that share the same road with you.

 

Fun – I guess that is what it all boils down to, right? Your well-deserved trust in the capacity of your LED lights eliminates all other worries that you can actually enjoy the ride itself. You know that even with the brightest moonlight lighting your way, your LED bicycle light still outshines it.

 

Welcome to visit the website of BEV, the professional bike parts manufacturer, to learn more information and specifications about LED bicycle lights and a variety of bike accessories. Feel free to contact with BEV.

 

Article Source: http://EzineArticles.com/8621962

 

How to Select the Right Plastic Pelletizing Machine

Posted on by

Pellets may be “only” an intermediate product, but their size, shape, and consistency matter in subsequent processing operations.

 

This becomes even more important when considering the ever-increasing demands placed on compounders. No matter what equipment they currently have, it never seems suited for the next challenge. An increasing number of products may require additional capacity. A new polymer or additive may be too tough, soft, or corrosive for the existing equipment. Or perhaps the job requires a different pellet shape. In such cases, compounders need in-depth engineering know-how on processing, and close cooperation with their plastic pelletizing machines supplier.

 

The first step in meeting such challenges begins with equipment selection. The most common classification of pelletizing processes involves two categories, differentiated by the state of the plastic material at the time it’s cut:

 

  • Melt pelletizing (hot cut):

Melt coming from a die that is almost immediately cut into pellets that are conveyed and cooled by liquid or gas.

 

  • Strand pelletizing (cold cut):

Melt coming from a die head is converted into strands that are cut into pellets after cooling and solidification.

 

Variations of these basic processes may be tailored to the specific input material and product properties in sophisticated compound production. In both cases, intermediate process steps and different degrees of automation can be incorporated at any stage of the process.

 

To find the best solution for your production requirements, start with assessing the status quo, as well as defining future needs. Develop a five-year projection of materials and required capacities. Short-term solutions very often prove to be more expensive and less satisfactory after a period of time. Though almost every plastic pelletizing line at a compounder will have to process a variety of products, any given system can be optimized only for a small range of the entire product portfolio.

 

Consequently, all the other products will have to be processed under compromise conditions.

 

The lot size, in combination with the nominal system capacity, will have a very strong impact on the pelletizing process and machinery selection. Since compounding production lots tend to be rather small, the flexibility of the equipment is often a big issue. Factors include easy access for cleaning and service and the ability to simply and quickly move from one product to the next. Start-up and shutdown of the pelletizing system should involve minimum waste of material.

 

A line utilizing a simple water bath for strand cooling often is the first option for compounding plants. However, the individual layout can vary significantly, due to the demands of throughput, flexibility, and degree of system integration. In strand pelletizing, polymer strands exit the die head and are transported through a water bath and cooled. After the strands leave the water bath, the residual water is wiped from the surface by means of a suction air knife. The dried and solidified strands are transported to the plastic pelletizing machine, being pulled into the cutting chamber by the feed section at a constant line speed. In the pelletizer, strands are cut between a rotor and a bed knife into roughly cylindrical pellets. These can be subjected to post-treatment like classifying, additional cooling, and drying, plus conveying.

 

If the requirement is for continuous compounding, where fewer product changes are involved and capacities are relatively high, automation may be advantageous for reducing costs while increasing quality. Such an automatic strand pelletizing line may utilize a self-stranding variation of this type of pelletizer. This is characterized by a cooling water slide and perforated conveyor belt that replace the cooling trough and evaporation line and provide automatic transportation into the plastic pelletizing machine.

 

Some polymer compounds are quite fragile and break easily. Other compounds, or some of their ingredients, may be very sensitive to moisture. For such materials, the belt-conveyor strand pelletizer is the best answer. A perforated conveyor belt takes the strands from the die and conveys them smoothly to the cutter. Various options of cooling—water spray, misters, compressed-air Venturi dies, air fan, or combinations thereof—allow for a good deal of flexibility.

 

 

Based on expertise technique, KOWIN designs and manufactures the high quality plastic pelletizing machine. If you need more information about plastic pelletizing line or plastic recycling machines series, welcome to visit our website and feel free to contact KOWIN.

 

 

Article Source: http://www.ptonline.com/articles/how-to-select-the-right-pelletizer

 

Embroidery vs Printing: Choosing the Better Option

Posted on by

Promotional items are meant to advertise your company and its products. That means when you give away freebies like umbrellas and T-shirts, they must be branded with an unobtrusive yet attractive company logo.

 

Most companies choose to print their logo on promotional garments. Printing is cost-effective, fast, and cheap but there are so many different printing techniques used for apparel printing. Almost all of them suit different business strategies but not everyone knows about them in detail. We’ve listed a few of the more commonly used apparel printing techniques used nowadays that you should know about before you choose.

 

  • Screen printing – This is the most commonly used method of apparel printing. Inks and mesh screens are used to burn or expose an image on to cloth. The entire printing process is simple and easy and the same screen can be used multiple times to create several designs and images.

 

  • Vinyl printing – Heat transfer vinyl printing is the best option for printing lettering on T-shirts and small objects. A special vinyl cutter machine is required to cut out images from a vinyl sheet. The heated vinyl is then pressed on to the fabric to bond it on to the material. This process is labor-intensive and quite slow. Moreover, color selection is limited and inks are expensive.

 

  • Digital printing – Direct to garment digital printing or DTG printing is printing directly on to clothing using special inkjet printers. Textile inks are used and the clothing material absorbs the inks to create a unique design. The process is quick, easy, and images are clear with sharp borders and bright colors. However, the machine and its inks are expensive and small orders may turn out to be pricey.

 

  • Sublimation printing – This process involves transferring heat on to polyester apparel items. The process uses a special heated gaseous ink to open pores on the polyester material and create an image. This process can also be used to print on non-textile polyester items like mugs, key chains, mouse pads, and puzzles. The process is restricted to white or light colored polyester items. It is expensive but durable, and creates an attractive stable image.

 

As you can see, there are several more types of apparel printing you can choose from but most of them are too expensive for bulk printing.

 

Apart from printing, companies do choose embroidery to create their logos on promotional items. The process is simple as an embroidery digitizer creates the design and then the design can be stitched over and over again on an embroidery machine as many times as you need. The embroidery digitizing process is a very important stage to get good quality, outstanding looking designs. The machine can create a range of beautiful effects like appliqué, 3-D effects, shading and depth on your logo.

 

Embroidery vs Printing

 

Printing is a cheaper option than embroidery. Screen printing is the cheapest option. However, this should not restrict your choices, because embroidery is a long term option. Embroidery is definitely more durable and wash-worth.

 

In fact, you can choose to mix printing techniques and embroidery to create a unique promotional garment such as sublimation transfers printing embroidery. With embroidery, you can incorporate different types of appliques, 3d embroidery, embroidered badges and so much more.

 

The bottom line is that as a businessperson, you want to create promotional garments that combine quality and effectiveness with price. Yes, printing is cheaper but embroidery creates a unique 3-D effect that remains in place even after multiple washes.

 

So make a decision to showcase your business using elegantly embroidered promotional garments, welcome to get in touch with Dah Jeng Embroidery – not only providing high quality embroidered patches but also provide direct embroidery and sublimation transfers printing service. With more than 30 years’ experiences, Dah Jeng Embroidery is always the best embroidery suppliers for you.

 

Article Source: http://EzineArticles.com/expert/Rishi_S_Shah/1966922

Article Source: http://EzineArticles.com/8892848