About Liquid Filling Machines

Posted on by

Liquid products play a big role in our everyday lives, there isn’t a day that goes by that we don’t use at least some sort of liquid product including water, soft drinks, ketchup, oil, milk and washing up liquid. Ever wondered how these liquids are packed into their containers on a mass scale? Automated machinery is employed to do this work in the form of liquid filling machines. Liquid filling machine can pack liquid product into containers much more accurately and much quicker than any human could, thereby reducing production costs. Every modern manufacturing facility in the world that is producing a liquid product will have a number of liquid filling machines to get that product into its packaging, liquid filling machines can provide years of high quality service and more than pay for themselves in the production efficiencies they create.

 

Bottle filling machines come in many different shapes and sizes, primarily based on the amount of product it needs to fill in a set time frame. Some high speed machines can fill upwards of 8000 bottles every hour and some, high end machines, can fill much more than that. Even if you only have a relatively small capacity production environment it is still better to have a machine fill the bottles as doing it by hand can be costly and inaccurate, small capacity machines can be bought quite cheaply and are key components to an efficient production process.

 

When making the decision to invest in a, potentially expensive, piece of machinery you are going to need to do some research on your production capacity, financial budget and space available to site the machine to make sure what you are getting will be right for you. You should also bear in mind that if you anticipate an increase in future production will want the filling machine to be able to cope, this machine is a long term investment so it pays to look towards future requirements before buying. Knowing the type of liquids you are dealing with is very important (i.e. if it is highly viscous or not…) as the machine specifications will tell you what kind of liquids the machine deals with. Also, the size, shape and nature of your container should be kept in mind.

 

A bottle filling machine should be bought with present and future requirements in mind. Every detail of your production facility should be studied before you spend your cash on it.

 

Liquid filling machines are an integral part of an efficient production process, if you would like to find out more about these or other packaging machines please visit Shin-I Machinery Works for more information!

 

 

Article Source: http://EzineArticles.com/5838418

 

Types of Badge Clips

Posted on by

With lanyards and ID cards becoming so popular, it is important to have a secure way for the badge to be fastened to the person wearing it. The type of clip used is the key factor in the whole design of identification cards and badge holders, because it is what prevents the card from being lost or damaged. If the ID badge clip is weak or fails to work properly, it will be insufficient and not work the way it was intended.

 

The identification card could be lost or damaged if the clip breaks or becomes too weak to securely hold the ID card in place. This is why companies offer a variety of different types of ID badge clips that will work in most any kind of environment, ranging from factories, hospitals, construction sites to office settings.

 

Right Way to Choose Badge Clip

You will need to choose the type of badge clip based on the type of environment it will be worn in and where it will be attached to the wearer. For example, will they be clipped onto a belt, shirt, jacket or so forth? This does make a difference. If it’s going to be hooked onto a place where it can be hit or caught on something, then it needs to be strong enough not to fall off each time it gets bumped.

 

Some clips are lightweight and others are designed to be heavy-duty. If your employees work in an office setting, then a simple and lightweight design will be fine. However, if the employees wear suits and other expensive clothing, you don’t want a clip that will cause damage to their outfits. Instead, you may want to choose one that is attached to a lanyard or some other type of holder.

 

If they work under rough conditions where it will get bumped and knocked around often, then a heavy-duty clip would be your best option. You need to choose something that is strong and has a good grip so it won’t come loose easily.

 

Basic Information

When choosing a specific style, you should make sure that the badge clip you choose is convenient for your employees to use. Some of the styles can be a little difficult to clip on. If the ID card needs to be taken on and off a lot due to security reasons, this could end up being a big problem.

 

A few of the different types of badge clips that are available on the market today include the alligator style, bulldog, plastic, steel badge, pressure sensitive, thumb-grip, slide-type, rubber tip and the smooth face badge clip. There are still many more to choose from so you should spend a little time examining the difference between them. This will allow you to wisely make an informed decision.

 

The badge clip may seem like a simple and insignificant item, but in reality it is a vital part of the ID card and should be considered carefully. Take your time and think about everything involved before making your decision.

 

Established in 1969, TAY YOUNG Industrial is a professional name badge clips manufacturer and supplier with more than 30 years of mature experience. TAY YOUNG’s plastic badge clip and strap clips have high quality, competitive prices and prompt delivery competitive advantage. Welcome to contact us for more ID Badges clips specifications. TAY YOUNG would be your best partner in the future. We also offer various and customized products. Please contact us for more information.

 

Article Source: http://EzineArticles.com/1408498

About Electromagnet Lock

Posted on by

An Electromagnet (EM) Lock is a locking device that consists of an electromagnet and an armature plate. There are four main types: U-bracket for glass door without frame, L-bracket for a narrow door frame, LZ-bracket for in-swing door and the regular installation lock.

 

How It Works

The concepts of electromagnetism apply here. When energized, a current passes through the electromagnet and attracts the armature plate with such a force that it shuts down the door. When both the plates attach with each other, they are literally inseparable unless made to do so using the valid key. That valid key is what is called the switch meaning the tool that can break the strong magnetic field.

 

An Electromagnetic manufacturer has to ensure that wiring inside the plates is done with no fault. Electromagnets have a high attracting power because of a high flux density created by the magnetic field of the coil inside the device. This is because of the solenoid wire inside.

 

And this is the precise reason why use of such a device is a safe option.

 

Installation

EM locks installation should always be done on the inside (the secure side). Most installations are surface mounted. For safety reasons, cables and wires should be inserted in the door.

 

Installation is quite easy but there are different methods of installation for different types for e.g. the installations of a U-bracket would be different from that of an L-bracket lock.

 

Advantages

  • Strong and sturdy
  • Easy to install
  • Huge magnetic holding force (safe)
  • Very suitable for emergency and fire exits
  • Quick to operate

 

Disadvantages

  • Requires a power source continuously
  • Can be disconnected in the event of a power outage disabling security
  • Expensive compared to the mechanical locks

 

Categorization

An EM lock is categorized as a “fail-safe” and “fail-secure” device.

 

With fail-safe, when power is lost from the device, the lock automatically de-energizes and releases allowing free access. Whereas in fail-secure, power loss is not a concern as it remains intact.

 

Hence, a fail-secure device is your best friend in a panic room situation (for thieves and burglars) as it won’t open without electricity and a key, while a fail-safe device is useful in an emergency situation (in case of fire).

 

Conclusion

In modern times the use of such devices are on a rise which is an excellent tool in the field of security. Compared to its mechanical counterpart, it sure bags points for being a safer option. However, the most important aspect of the device is its dependence on power. How the future can help in resolving this issue remains to be seen!

 

If you are looking for quality electromagnetic locks, then you are in the right place! Pongee has specialized in series of auto identification systems and related accessories since 1987, we manufacture only the best products. The EM locks (Electromagnetic locks) are designed with different holding force electromagnetic and magnetic lock. To see more specification about our EM lock series, please browse the product introductions and feel free to contact Pongee!

 

Article Source: http://EzineArticles.com/9179009

Choose The Best Quality Woven Labels

Posted on by

There are many quality woven labels out there to choose from, but too often customers are steered toward second rate product. If you have been burned by cheap labels before, then you know enough to know that you cannot chase after the first low price you see. You have got to get a feel for the clothing and the company that sells it before you waste a lot of time and effort selecting a wardrobe. If you want to know how to choose the best quality woven labels, then you have to first learn as much about them as possible. That means feeling the material for yourself, learning the specs behind the garment, and then trying them on for the perfect fit. Here’s how to know if a company’s products are worth your time.

 

Material Quality

One way to judge material quality of woven label is to compare against another garment that you know is of high production value. But if you don’t have that at your disposal, then it becomes necessary to pursue other options. All products must keep a record of what they are made out of. With the World Wide Web at your disposal 24 hours per day and 7 days per week, it has become possible to get a full education in minutes. Ask the company about their products, and then check them out with outside sources. As you do, also look in to production techniques and see if the company is measuring up.

 

Specs of the Garment

Production standards are especially important because even the best materials can produce shoddy product if the manufacturers are not using state of the art equipment and good old fashioned know how. The specs of your garment can also be determined by reading a tag and doing some independent research. Or, you can get friends you trust, and whose fashion sense you respect, to give you referrals. Either way, you are doing the leg work needed for a smart purchase.

 

Test Driving

You wouldn’t buy a car without a test drive, so why would you trust your sense of fashion and style to just anyone? Woven labels give you comfort and stability if done right. But there are a lot out there that are of poor production standards, and it helps to actually feel the material against your clothes before you move forward with a purchase. While the Internet is a great source of information and for buying products, it can also lead to some pretty costly mistakes if you are not painstakingly reviewing the standards with which clothing is made.

 

Choosing the best quality woven label will give you a sense of comfort and pride as you step out into the world. Are you looking for high quality woven label? Welcome to visit Chien Chee Embroidery’s website to get more information about woven labels and feel free to contact us!

 

 

Article Source: http://EzineArticles.com/6624091

Benefits of Installing Urinal Flush Valve

Posted on by

The benefits of an automatic urinal flusher are numerous; not only will the bathroom will be cleaner and odor free, the chances of contamination from toilet handles is greatly reduced. On these days of pandemic and swine flu, that is the greatest benefit of all.

 

If you thought that installing a urinal flush valve is a complicated and expensive endeavor, here are some facts to consider:

 

Installations of the urinal flush valves do not require a change in plumbing. It is installed on the outside, and is a quick and painless procedure that doesn’t take a long time and does not require the water supply to be shut off.

 

The urinal flush valve has a battery operated sensor. The batteries need changing every 2 to 5 years according to the frequency of use. Changing the battery is a simple matter-as simple as changing a battery on a child’s toy.

 

Urinal valves are virtually maintenance free. Once you install it and adjust the sensor, it will work by itself. Sensors can be adjusted to flush at certain intervals or by sensing a presence in front of the urinal.

 

Installing a urinal flush valve will enable you to concentrate on more important things than the cleanliness of the bathroom. It will not only make your bathroom smell better, it will help us all avoid disease.

 

Kingsway provides electronic flush valves both for toilet and urinal uses. Our products feature easy installation to convert manual flush valve to automation. If you are looking for durable flush valves, Kingsway is the best choice of automatic sanitary products manufacturer for you. Do not hesitate to contact us for more product information!

 

 

Article Source: http://EzineArticles.com/4865909

 

Tips of Collet Chucks Use

Posted on by

The collet chuck is often taken advantage of by some CNC owners. By this I mean that they are ignored quite often and this can present problems down the road for the operator. Some issues which may arise are tool breakage, poor cut quality and even worse, damage to your expensive spindle.

 

Collet chucks are made of spring steel and the more often a tool change is made the more the collet chuck expands leaving the tool to slip and shift around.

 

The most important portion of the collet chuck is the mouth, which is located at the bottom end from where the tool extends. This area is important because all the lateral pressure taken by the tool must be evenly distributed on all sections of the collet chuck for it to be true or concentric. Not colleting the tool in perfect alignment results in tool breakage.

 

I made of a short set of rules which can help you avoid any problems, achieve good cuts and actually extend the life of your router bits.

 

Right Ways of Collet Chuck Use:

 

  1. Always change and throw away your collet chucks after machining for 400-500 hours. This is 3 months’ time in a normal two-shift operation.

 

  1. You can tell if you require replacement if there are any markings or abrasions on the inside of the collet chuck or on the tool itself. This indicates slippage of the router bit inside the collet chuck.

 

  1. When inserting the bit into the collet chuck do not let the flute fadeout portion of the tool extend into the collet chuck. Insert the shank of the bit 80% into the collet chuck and you will have perfect concentricity.

 

  1. Each time you make a tool change, clean the inside of the collet chuck and the tool itself. Do not use a petroleum based lubricant as it will only act as a magnet for all the dirt and dust by the residue it leaves behind.

 

Rigidity and concentricity are the key elements in any routing application. The simple process of properly colleting router tools, maintaining collet chucks, and replacing them at regular intervals will safeguard the productivity of the operation and insure that the finish of parts is not jeopardized.

 

Autogrip is a professional and experienced manufacturer of collet chucks. If you are interested in collet chucks and other related products, welcome to visit our website to get more information and feel free to contact us!

 

 

 

Article Source: http://EzineArticles.com/5142205

About Orbital Air Sander

Posted on by

For any sanding or polishing jobs that require an excellent finish, on almost any surface, an orbital air sander is the tool that you need. Orbital sanders have quickly become the tool of choice for anyone wanting to either prepare a surface for painting, or alternatively, to get a superb finish afterwards.

 

An orbital air sander is a flexible and easy to use air tool, which is considered essential for professional auto body repair jobs, and is also the kind of equipment that every hobbyist will want to have in their toolkit in order to ensure that they can do a great job.

 

An orbital air sander features a sanding pad that moves in a random manner around a specific center point. It is this random movement that is the key to the success of the air tool. Rather than with traditional sanding devices such as a belt sander, where the tool leaves a mark on the surface and can lead to an uneven finish, with a random orbital air sander, the finish is even over a much wider area, meaning that the finish that you can expect is much better and smoother.

 

The combination of a circular and random action of the sanding disc on an orbital air sander means that it is able to sand in any direction, cover a larger area relatively quickly, and avoid concentrating too much sanding action on one area. This means that the finish will be more even than with a belt sander or even old style orbital devices that did not have a random aspect to their movement.

 

You can add different sanding discs to an orbital air sander to ensure that it is properly set up for a huge variety of different jobs. From heavy duty sanding paper for tough jobs through to buffing cloths in order to get a final polished finish at the end of the job. With most orbital air sanders, changing the disc takes just a few seconds, allowing you to get a variety of jobs done a lot quicker.

 

Perhaps the most immediately obvious application that an orbital air sander can be used for is in preparing an area of auto body for painting. You would start off with a fairly rough grade of abrasive paper in order to strip back the paint and leave bare metal. Within a couple of seconds, it is possible to change to a finer abrasive in order to smooth the metal out and get it ready for paint. After each coat of paint, an even finer abrasive can be used in order to get a great finish, before the disc on the orbital air sander is changed for the final time and replaced with a buffing cloth to get the perfect finish.

 

Pretty much every power tool manufacturer produces their own version of the orbital air sander, and they range in price from basic inexpensive models that are useful for anyone wanting to do small jobs around the house right up to high quality professional air tools that are designed for the professional auto body shop, and will provide reliable service for years.

 

King Spark, the leading air sanders manufacturer in the industry, providing various type of air grinder, including palm sanders, dual action sanders, orbital sanders, high speed air sanders and more. As an expert of air sander and air tools supplier, we produce only the best products to our clients, which let us having good reputations from clients around the world. Feel free to contact us for more information!

 

Article Source: http://EzineArticles.com/818224

Pulley Block is What?

Posted on by

A pulley block is an essential component of a pulley mechanism. It functions as the weight-bearing point in the system, which makes the work to be done substantially easier. Pulley blocks, though the name evokes an image of a square, are actually the grooved circles in pulley systems that are used to guide the rope or cable through the pulley. A pulley block is, in fact, the essential component of the pulley system.

 

The pulley is one of the most commonly used simple machines and is one that has been used for centuries. It has been used by numerous civilizations around the world and has been used to construct the most astonishing man-made structures that still stand today. The pulley mechanism doesn’t typically consist of more than three functioning parts, including the pulley block. The pulley blocks within the system is a vital component because it takes the amount of weight from the object being lifted and then turns in place, allowing the cable or rope to be pulled through the system more easily.

 

Also referred to as “block and tackle” systems, pulleys have been used since their creation in hundreds of different instances, and always with the same purpose: to lift objects too heavy to be lifted by human strength alone. The pulley point is determined by choosing a spot higher then both the source of energy pulling the cord or rope that runs through the pulley and the object that is to be moved or lifted. The rope, or high-tensile cable for heavy-duty applications, is then attached to the object to be moved. The other end is either pulled by hand or connected to a device called a winch, which gathers the rope by cranking it around a wheeled sprocket. The rope being pulled through the pulley creates a work point called a fulcrum, which makes lifting the heavy object much easier.

 

The earliest pulley systems were fabricated from wood components with wrought iron pins, though these typically weren’t strong enough for one cable to lift extremely heavy objects. In these early machines, the pulley block could contain up to four blocks, each with its own cord, for even more weight distribution. The pulley systems that are made today from cast iron and steel alloys are exponentially stronger, allowing objects that weigh up to 10 tons to be moved with the use of a winch system as long as the cable used to move the object is rated strong enough to handle the task.

 

The devices described above and related products may be bought at Re Tu Fa Hardware Manufacturer. For more information about pulley blocks, welcome to visit our website and feel free to contact us!

 

Article Source: http://www.wisegeek.net/what-is-a-pulley-block.htm

Overview of Laser Welding Machine

Posted on by

Laser welding machine is also called Laser Beam Welding machine and it is a commercial process and is used when you want to fuse together several pieces of metal. The way it works is that a laser beam is pointed to a joint and then the beam is moved along that joint. The process will melt the metals into a liquid, fuse them together, and then make them solid again.

This is generally a process that is used when you want a linear continuous seam or at times when you want spot welds in a certain area. There are basically two types of laser welding machines. Laser conduction welding focuses the beam on a specific area and relies on the conductivity of the metal it is melting to conduct the heat into the joint. As this happens, the material being welded changes from solid to liquid, and then they turn back into solid and they are welded.

In laser penetration welding, the laser beam is pointed into a certain area and at a stack of material that needs to be melted all together. This single location creates a space for the beam to concentrate on the specific needs of the metals to be melted. Some of this material will then vaporize and create a hole that is as thick as the material that was heated.

After the heating and cooling down of the metal it is welded; this is similar to a spot lap joint. The two types of lasers that are used for this process are the Gas Laser that uses a mixture of several gases that can include helium, nitrogen or carbon dioxide for its media, or a Solid State Laser that uses a solid media like a synthetic ruby aluminum oxide or gas. Both type so lasers can be used as continuous streams or pulsed modes of operation.

The Laser Welding process is very versatile and it can be used on many different steels including carbon, HSLA, stainless, aluminum or titanium. In some instances like the carbon steels, you will need to guard against cracking because of the cooling rates. This type of welding does gain a high quality weld and it can be a very fast process, depending on the thickness of the piece you are working on.

The automotive industry uses Laser welding machine for much of what it does and the gas laser machine are usually the most readily suitable for this type of high volume.

There are several advantages of laser welding machines. You can send the laser beam through the air rather than having to place it in a vacuum and robots can easily do this type of work. You can get a higher quality in your welds.

There is also another hybrid type of laser welding that is called laser hybrid welding and it combines both laser beam and arc welding so you get more flexible positions and welding speeds are higher, and undercutting is reduced.

A few of the advantages to laser welding are that you can do deeper or more narrow welds than can be done with other processes, you don’t have to worry about distortions because they aren’t created with the laser. For more info about laser welding machines, feel free to contact us!

Article Source: http://EzineArticles.com/1553556

CNC Milling Machines

Posted on by

CNC milling machines are also known as machining centers. These machines are computer controlled as with all CNC machines. They operate on the Z axis and are vertical mills that move vertically. They offer precision and speed where one aspect does not affect the other. These CNC milling machines offer a cost effective alternative to hand engraving, flat surface work.

 

The most advanced of the milling CNC machines are the 5 axis machines that offer a wide range of capabilities. Horizontal milling machines are available and this is usually the lines of the 5 axis CNC milling machines. Basically, with the 5 axis machines, virtually any project can be done. One could sculpt the human head with ease with one of these machines.

 

At one time the machines were quite expensive to purchase and to operate. Now, because of the declination in the cost of computers and the availability of free operating systems, the CNC milling machines have dropped to more affordable prices. This has allowed many more shops to take advantage of this type of technology and has caused more competition in the machining industry. The shops now usually specialize in the type of work that they do.

 

There is a variety of different tools that can be used with this type of machinery. In the US, the most common CNC miller tooling is the CAT tooling; however, now a better alternative called BT tooling as raised the bar. BT tooling can be easily confused with CAT, so be careful.

 

The CNC milling machine can be either purchased brand new or as a used product. There are companies who specialize in milling CNC machines that cater to specific industries. A used milling machine or machining center can be more cost effective and can come with some type of service and warranty package if purchased from the right dealer. With these types of machines, because of the larger expense that it can put onto a company, it is tempting to go with a cheaper, used version; however, that may not always be best. Make sure that if you do purchase a used machine that there is some kind of guarantee and that the machine was taken out while still in operation.

 

CNC milling machines can come in many different types. There are gun drilling machines, horizontal boring mills, five axis milling machines, and many more. There are several different manufacturers of these machines that include top brands such as: Heidenhain, Phoenix, TOS and VTEC just to name a few. If interested in purchasing a top of the line machine, make sure that the dealer offers service solutions to help with upkeep and maintenance of the machine in the early stages until someone from your company can learn how to do it. Well established dealers can offer rebuilding services of old CNC milling machines. This too can be a cost effective alternative to purchasing brand new.

 

To learn more about CNC milling machines, contact Jiuh-Yeh CNC Milling Machine Manufacturer. They will be able to offer answers to your questions on a wide range of issues that is related to CNC milling machines.

 

Article Source: http://EzineArticles.com/3056213