With lanyards and ID cards becoming so popular, it is important to have a secure way for the badge to be fastened to the person wearing it. The type of clip used is the key factor in the whole design of identification cards and badge holders, because it is what prevents the card from being lost or damaged. If the ID badge clip is weak or fails to work properly, it will be insufficient and not work the way it was intended.

The identification card could be lost or damaged if the clip breaks or becomes too weak to securely hold the ID card in place. This is why companies offer a variety of different types of ID badge clips that will work in most any kind of environment, ranging from factories, hospitals, construction sites to office settings.

Right Way to Choose Badge Clip

You will need to choose the type of badge clip based on the type of environment it will be worn in and where it will be attached to the wearer. For example, will they be clipped onto a belt, shirt, jacket or so forth? This does make a difference. If it’s going to be hooked onto a place where it can be hit or caught on something, then it needs to be strong enough not to fall off each time it gets bumped.

Some clips are lightweight and others are designed to be heavy-duty. If your employees work in an office setting, then a simple and lightweight design will be fine. However, if the employees wear suits and other expensive clothing, you don’t want a clip that will cause damage to their outfits. Instead, you may want to choose one that is attached to a lanyard or some other type of holder.

If they work under rough conditions where it will get bumped and knocked around often, then a heavy-duty clip would be your best option. You need to choose something that is strong and has a good grip so it won’t come loose easily.

Basic Information

When choosing a specific style, you should make sure that the badge clip you choose is convenient for your employees to use. Some of the styles can be a little difficult to clip on. If the ID card needs to be taken on and off a lot due to security reasons, this could end up being a big problem.

A few of the different types of badge clips that are available on the market today include the alligator style, bulldog, plastic, steel badge, pressure sensitive, thumb-grip, slide-type, rubber tip and the smooth face badge clip. There are still many more to choose from so you should spend a little time examining the difference between them. This will allow you to wisely make an informed decision.

The badge clip may seem like a simple and insignificant item, but in reality it is a vital part of the ID card and should be considered carefully. Take your time and think about everything involved before making your decision.

Established in 1969, TAY YOUNG Industrial is a professional name badge clips manufacturer and supplier with more than 30 years of mature experience. TAY YOUNG’s plastic badge clip and strap clips have high quality, competitive prices and prompt delivery competitive advantage. Welcome to contact us for more ID Badges clips specifications. TAY YOUNG would be your best partner in the future. We also offer various and customized products. Please contact us for more information.

Article Source: http://EzineArticles.com/1408498

Wear your office uniforms in style; if your kind of company is a bit boring to start with, look for a way to liven things up. A great way to start is with how you dress when you go to work. Have fun with what you wear and suddenly work itself will be far more enjoyable. A retractable badge holder is one way to bring comfort and style into your office look. This is a wonderful accessory that has so many uses.

Firstly, it allows your identification badge to be carried around easily without any of the bothersome strings or chains that normally attach your card to your clothing. It has a reel that can be unwound to a certain length away from the body to facilitate ease of identification card use when swiping your card or simply presenting it. Then all you need to do is let it go and the reel automatically snaps it back into place without any further effort on your part. As a result the retractable badge holder can even be easily hidden under a jumper or coat if you so desire, though with all of the different designs that are available, I can’t think why you would possibly want to do that.

A retractable badge holder is made to fit with clips so you can fasten it most securely onto your neckties, collars and belt loops. Many companies provide customized retractable badge holders to their staff that have the company logo printed on them. They often present these to the staff attached to lanyards that have the company colors. They are also a great way to present your company logo during trade shows and staff can even showcase their company and its services to their acquaintances just by showing off their badge holder.

Retractable badge holders come in endless designs and in an array of colors that cater to every person’s preference and style. The market offers different shapes and sizes of retractable badge holder including square, round, translucent, chrome, heavy duty, reinforced reels, lanyard reels, and swivel badge reels with others being custom made versions of these. People can get hold of these fashionable accessories from their nearest stores or on the web where they can easily look at all of the different varieties on offer and compare prices. So get one today and make a statement with your badge that not only spells convenience but also style.

Having been someone who was often required to present my identification card, it is amazing just how convenient it is to have retractable badge holders when in this situation as they make presenting your card a simple process rather than having to detach your card from clothing. These types of badge holders also go well with neck lanyards to hold them around your neck. I enjoy writing about these nicknacks if it’s possible that they may reduce the stress levels of others in their day to day work lives. For more information of retractable badge holder, please contact us!

Article Source: http://EzineArticles.com/2911770

Badge holders are usually made of plastic and are used to hold as well as protect your paper name badge. They are available in numerous shapes and sizes with different attachment options. It is very important to design your custom id badge keeping in mind the size of the badge holder you have. When buying a badge holder you should always consider whether you need it separately or with a complete kit. Badge holders with complete kit include the attachment device and blank name badges. They infect include everything you need but it gets a bit hard to compose your name on them using the word processor if you don’t have a template already designed for them.

The attachment options basically have four main categories. These are lanyards, pins, stickers and clips. Normally your choice would to be based on the period you would use the badge for, the availability of the options and your budget. The best feature of the badge holders is that they can e reusable. You can replace the badge from event to event provided that all of them fit into the holder you have. This would definitely saves you money and you also would not require to create the name plates every now and then as you will have a template saved for the size of you holder.

The custom id badges are the ones used for a variety of reasons. The general use is for the security purposes in your office, the identification of your employees and can also be used as the entry card for visitors. When designing the custom id badges for an office you would always want to punch in the employee name, job title, department and company logo and in some cases the photo as well. Mostly with these kinds of badges the holder are attached with neck lanyards or clips in a way that they are primarily visible.

Custom ID badge holders also offer an easy and inexpensive way to promote your company image. Their variety in styles is l capable to suit anyone’s requirements as for identification of the trade and the employee identification in the office. They are also used as to display the company information and the color theme of the company. It is widely noticed that the badge holders and the lanyards exhibit the colors of the company logo, which not only make them look good with the badge but also reflect the company colors.

Some companies assign different colors for visitors and employee. Besides that the lanyards could also differ in color in regards to the position the employee stands in the hierarchy. Besides the shapes and styles that these holders offer, their feature and materials they are made of also vary. Numerous companies all over the world use different badge holders. A few of the most loved ones are vinyl plastic holders, Proximity Card, rigid badge holders and magnetic ones. They come in both vertical and horizontal shapes offering the user to more options of designing the badge. They can be seen attached to an employee frond pocket, hanging in the neck, and in security services they are mostly seen attached to the arm using an armband.

Rick Gambino is the author of this article for more information about id badge holders and other supplies go to http://www.compucardinc.com/badge-holders.html

Article Source: http://EzineArticles.com/?expert=Rick_Gambino

Article Source: http://EzineArticles.com/2045690

Article Source: http://EzineArticles.com/?expert=Lisa_Mason

Article Source: http://EzineArticles.com/1364296

Tay Young Industrial Co., Ltd. was founded in 1969 in Taiwan. Its product offerings include badge clip with adaptor, pins, elastic lanyard accessories, neck lanyard, luggage straps, wrist bands, badge holder, ball chains, badge reel, magnet pads, hand punchers.

It’s a professional manufacturer of Control Cables and ID Accessories with more than 30 years experience. With many years of dedicated commitment to our products and customers, we have grown and developed rapidly into worldwide market, now. We are one of the leading manufacturers and marketers of advanced technical skill and lead facilities. Our product is now sold global.

Tay Young’s ID accessories and control cables exporter has obtained professional certifications, have high quality, competitive prices and prompt delivery competitive advantage. If you need more ID accessories and control cables specifications, please contact us. Tay Young is your best partner in the market.

badge-reels

Tay Young Industrial Co., Ltd.
Taiwan : (Main Office & Factory) 61 Lane 300, Changnan Road Sec. 1, Changhua 50060 Taiwan, R.O.C.
Contact Person : (Taiwan, GMT +8:00 )
Mr. Charles Hung ( For ID Accessories ) ; Mr. R.L. Hung ( For Control Cables)
Tel : + 886- 4-732 4919
Fax : + 886- 4-738 6322
E-mail : sales@tayyoung.com.tw ; ty919@ms2.hinet.net