Tag Archives: motorbike engine oil

Motorbike Engine Oil – What Oil Should You Be Using

Posted on by

Motorbike engine oil is added to a motorbike’s engine for several reasons. The first is obvious, motorbike oil acts as a lubricant to ensure your engine operates correctly, with almost no metal to metal contact – everything is coated in a thin film of oil. Motorbike engine oil also has several other important tasks to do. One such task is to circulate throughout the engine to cool engine parts that do not get near a water jacket.

 

Motorcycle piston rings do not perfectly seal, & by-products of combustion such as particles of carbon will slip past into the engine. In a motorcycle’s engine, these carbon particles can cause a lot of damage. Motorbike oil holds these carbon particles in suspension until the oil filter can grab them. Finally, motorcycles engines get internal build ups of tars, waxes, and other gunk. Motorbike engine oil keeps the bike’s engine clean by dissolving and removing these.

 

It is for these reasons that it is important to check your motorbikes oil levels regularly as not only does having a good level of oil improve the performance of the bikes engine it will also keep it healthy thus extending the bikes life expectancy.

 

Choosing The Right Motorbike Engine Oil

Using the right oil is just as important as having oil in the engine as there are so many different types of oils on the market. Oils designed for automotive engines should not be used in motorcycles and you should seek out specialized motorbike oil where possible.

 

There are some special considerations to consider when choosing the right motorbike oil for your bike.

 

  1. Wet Clutches – in a motorbike clutch the oil flows through the clutch and if the motorbike oil used has too much molybdenum, this can cause the clutch to start slipping. For this reason, users should avoid energy conserving motorbike oils as these contain friction modifier additives which cause clutch slipping. 0w-20 and 5w-30 oils should not be used in a motorcycle.

 

  1. Sporadic Use – people who use their motorcycles only sporadically might see that the oil has drained into the sump, leaving no protective film in the engine. This can cause the next start to be particularly hard on the engine. The film strength is very important in the motorbike oil for bikes that are only used sporadically. Synthetic motorbike oil will have much higher film strength than petroleum oil. This will cause the oil to take longer to drain off the engine into the sump.

 

Key Advantages To Using Synthetic Oils:

  • A higher viscosity index than mineral base oils.
  • Better resistance to thinning at high temperatures and thickening at low temperatures.
  • Longer lasting in service without radical changes in viscosity.

 

To help you with choosing the right oil, you can try to send inquiry to Min Jung Hong. The company specializes in kinds of oil and lubricants. You can find motorcycle lubricants, agricultural lubricants, synthetic lubricant, MoS2 Grease, fuel injector cleaner, and so on products on their site. Do not hesitate to contact with Min Jung Hong to get the best oil for your motorbike.

 

Article Source: http://www.finol.ie/news/motor-bike-engine-oil/

Comparison between Automotive Oil and Motorcycle Oil

Posted on by

Oil is quite essential for the smooth functioning of engines in both motorbikes and automobiles. However, there are different types of oils which have different types of viscosities and it should be chosen accordingly. In the past, engine oils used in cars and motorcycles varied hugely due to various factors. Nowadays, both cars and motorcycles are manufactured with revving engines that can use automotive oil without any bad effects.

 

Motorcycle oil VS Automotive Oil

 

Although both these can be used in bikes, the engines of both cars and motorbikes function are different and their require oils are specifically formulated. Compared to the car engine and bike oils are expensive. Most of the motorcycles include some important factors which enable better performance and durability of the motorcycles. Car oil is quite inexpensive compared to bike. Some of the major differences between these two types are elaborated below.

 

Viscosity:

Compared to the automotive and bike is thinner even though both these oils are classified under the same viscosity. This is made thinner so that it provides better and easier lubrication for small internal parts in the motorbikes.

 

Price:

It is quite expensive compared to car oil as it is highly refined. Bike oil is thoroughly refined so that it provides better lubrication and passes easily through small internal components in the vehicle. As it requires an extended refining process, it is quite expensive than the standard types of engine oil. However, it is important to purchase motorbike engine oil for vehicles as it guarantees better performance and higher durability of the engines.

 

Reduction of heat:

In comparison to the automotive oil, this oil is designed to reduce the amount of heat generated in the internal parts of the engine. Moreover, heat is generated in focal points in these engines compared to car engines.

 

Specifically formulated oil:

As compared to cars, bikes require specifically formulated one as oil breaks down faster in bikes due to the continuous meshing of gears. So all the motorbike engine oils are designed and formulated specifically for bikes.

 

Different additives:

Automotive do not contain additives which are present in motorbike engine oils. Various types of additives such as PTFE or Teflon are included in these to reduce excessive heat and friction. This is coated onto the gears of the vehicle.

 

Friction:

The engine oils used in bikes helps to reduce friction and thereby prevents clutch slippage. It can therefore be used effectively in vehicles with oil-wet clutches. But car engine seldom can be used to reduce slippage or friction.

 

However, when exposed to extreme pressure and heat, both these types of engine oil breaks down which further causes thinning of the oil. It then fails to lubricate the engines effectively.

 

Today with technological developments in various fields, different types of engine oils are made available quite easily in most of the online stores. Synthetic oil is another type of automotive oil used in most of the vehicles today.

 

Min Jung Hong is a professional manufacturer of specializing in motorbike engine oil and various high performance motor oils. If you are interested in and need further information, welcome to visit our website and feel free to contact us!

 

Article Source: http://EzineArticles.com/expert/Anamika_Swami/720304

Article Source: http://EzineArticles.com/7127103