Tag Archives: staplers

New to Carton Closing Stapler? Here’s What You Need to Know to Get Started.

Posted on by

The following will help you identify the best carton closing stapler and carton closing staples to staple the tops and bottoms of boxes.

 

First, Let’s Talk Staplers.

 

Carton closing staplers for top and bottom box closure come in two styles.

 

  • “Stick” or “Strip” – good for low and medium volume carton closing stapling applications.
  • Coil Staples – good for medium and high volume carton stapling applications.

 

Like most staples, carton closing staples have three important measurements that make up the overall dimensions of the staple:

 

  • Crown Width: This is the wire along the top that connects the 2 legs. Common carton closing staple crown dimensions used to close the bottoms and tops of boxes include: 1-3/8” wide crown (or “A” crown) and 1-1/4” wide crown (or “C” crown).
  • Leg Length: The two wires that come down from each end of the crown wire make up the legs of the staple. Common carton closing staple leg lengths used to close the bottoms and tops of boxes include: 1/2”, 5/8”, 3/4”, 7/8”, and 1-1/2”.
  • Wire Dimensions: Fastener wire is either flat or round. Carton closing staples are made of flat wire that has two dimensions.  For example, the wire dimensions of the Bostitch SW74375/8 staple are .074” x .037”.  You will notice that these dimensions make up a portion of the nomenclature of the part number.

 

Tip! – The wider the crown and the thicker the staple wire, the more secure the fastener will be.

 

Which Stapler Is The Best Stapler For Your Particular Carton Closing Application?

 

The guidelines stand pretty true for most top and bottom box stapling applications using a box with standard “C” flute corrugated board.

 

  • Single wall corrugated: 1/2”, 5/8”, and 3/4” leg lengths
  • Double wall corrugated: 3/4” and 7/8” leg lengths
  • Triple wall corrugated: 7/8” and 1-1/2” leg lengths depending on the application

 

Where to Buy Carton Stapler?

About this question, I recommend you to visit Apach Industrial Co., Ltd. – they offer a wide range of top quality Carton Stapler products. When you need to securely close a box, corrugated container, carton or any commercial packaging for shipping, you can choice their Carton Closing Stapler product. A good Carton Stapler can ensure fast and secure lid closing well. Hope you would like Apach’s products.

 

Article Source: THE R.V. EVANS COMPANY

Overview of Narrow Crown Stapler

Posted on by

Whenever considering to installing trim, building home furniture as well as cupboards, the narrow crown stapler turns into a handy device. There are lots of types and sizes of pneumatic staplers available on the market. But the 18 gauge narrow crown variety is the ones ideal to wood working jobs.

 

Generally, there are four typical pneumatic stapler sizes and varieties. These are generally: Standard Crown stapler, Narrow Crown stapler, Medium Crown stapler, Wide Crown stapler etc.

 

Standard Crown stapler are usually 22ga (3/8″) and appropriate for securing covers because of its wide crown and short staple leg length. Normally Narrow Crown stapler are the ones which uses 18ga (1/4″) staples from around 5/8″ up to 1 1/2″ long for installing trim, cupboard backs etc. Narrow Crown stapler is usually an 18 gauge, 1/4″ crown stapler. The entire body is made of lightweight die-cast aluminum and it has an overall weight of around 2 1/2 pounds that is pretty standard for a stapler or air fastening instrument of this dimension.

 

In use, the lightweight of the device should not create a fatigue issue, in spite of pretty moderate or continuous use. Like the majority of air fasteners there is a weight and balance tendency towards the front of the device that has a tendency to cause wrist flexion. One of several primary benefits staples have over say, brad nails, is; a) the staple provides 2 fastening points instead of the single brad nail, and b) the crown on the staple offers a wider fastening point and it is lower the probability that for the materials getting fastened to “pull through” the fastener. This can sometimes occur with brad nails and particular materials, like thin MDF sheets. One benefit the brad nailer has over the stapler is that brad nail holes are fewer noticeable and may be effortlessly filled and hidden. A stapler leaves a bigger mark that is easily visible and a little more time consuming to fill. So, the narrow crown staplers are definitely perfect tools for fastening plywood and MDF backs to cabinet and furniture carcasses to deliver extra strength and rigidity, and also to avoid the issue of racking, particularly when the rear side of the item won’t be easily visible.

 

Generally just forward of the trigger on the underside of the main body is the depth adjusting feature. According to the type and denseness of materials you might be stapling into, you may want to adjust drive depth setting to make sure an appropriate driving depth. When the staple is not being driven far sufficient into the materials, simply rotate the tiny wheel a notch or two to the right. If it is driving too deep, turn it a notch or two to the left. Testing driving depth on some scrap pieces of the identical material will make sure an excellent result with your first effort.

 

The driving area of the tool at the front/top is generally surrounded. While you fire the tool, a driver ‘blade’ shoots out from the body of the instrument very quickly, contacts the head of the staple towards the top of the magazine and drives it straight into your material. After that it retracts ready for the next firing action. Obviously, you cannot see this since it happens so quickly. Sometimes, for whatever reason, you may experience a jam. This is where the staple fails to shoot straight out, or the contact from the driver blade does not force the staple straight out.

 

Apach 18 GA Narrow Crown Stapler is your best choice when you need the holding power of a staple, but want minimal tool marks and fastener holes to fill. This Narrow Crown Stapler which can also eliminates the need for noisy compressors and is great for interior decorative trim, cabinetry, cabinet backing, crafts and hobbies. If you need further details about narrow crown stapler, do not hesitate to contact APACH!

 

 

Article Source: http://EzineArticles.com/expert/Tridipta_Ghosh/582319

Article Source: http://EzineArticles.com/4665597