Author Archives: Camille F.

The Built-In Safety of Permanent Lifting Magnets

Posted on by

Failsafe operation is the unique advantage of permanent lifting magnets. They are immune to power failures.

 

Permanent lifting magnets provide a quick and efficient way to lift, lower and vertically or horizontally transport sheet, flat and round steel, such as plates, forgings and die castings. Since they do not require electricity to operate, they have a built in failsafe feature that eliminates the work safety hazards caused by power failures.

 

Overview of Permanent Lifting Magnets

 

Permanent magnet lifters are made from two types of magnets: Rare Earth and Ceramic. Lifting magnets have a very strong but low magnetic field and are capable of safely lifting loads in excess of 2,000 pounds, which can be diminished under certain load conditions. These magnets are sensitive to air gaps between the magnet and the load. This means that when the air gap increases, the magnetic holding force will be reduced due to a lower density of magnetic flux between the magnet and the load. Air gaps are created in different ways. A few examples are paint, dust, and heavy mill scale. Badly machined surfaces also create air gaps. Full lifting capacity can only be obtained when the magnet makes full contact with the material being lifted.

 

Operation

 

Permanent lifting magnets do not require electrical power to operate. They are operated manually with a lever mounted on the lifter. However, they cannot be operated remotely. Permanent lifting magnets are easy to operate. With the lever in the off position, the load should be placed on the lifter, eliminating as many air gaps as possible. When the magnetizing lever is placed in the “on” position, the load will be magnetized and ready for lifting. Attempt a trial lift to ensure the load can be lifted safely. When the lift is completed, and the load has been placed completely and safely in a resting position, move the lever to the “off” position to release the load from the lifter. For long and heavy loads, multiple magnets can be used in tandem to extend the lifting capacity.

 

Immune to Power Failures

 

Failsafe operation is the unique advantage of permanent lifting magnets. They are immune to power failures. The electromagnetic lifter does not have this safety feature because electromagnets require continuous electrical power to operate. Electromagnetic lifters would require the integration of an uninterruptible power supply to produce a failsafe operation. This would, of course, increase start up, maintenance and operating costs. On the other hand, the electromagnetic lifter is the most cost-effective “magnets per pound of lift” since they can extend the lifting capacity beyond what permanent magnetic lifters can handle. The electro-permanent magnetic lifter also possesses the failsafe feature but this type of lifter requires electrical power to turn the lifter on or off. The power can be supplied by a battery. The amount of power consumption to turn the electro-permanent lifter “on” or “off” is nominal. However, the battery will need to be charged periodically.

 

Earth-Chain Enterprise Co., Ltd., was established in 1988, and had quality promise by ISO 9001 and CE Certification as well as over 30 patents. We have plenty of experience on manufacturing magnetic tools and machines. In order to keep producing high-performance magnetic manufactures, we actively engage in R&D of products to meet customers’ needs under Earth-Chain’s business philosophy, innovation, honesty, and responsibility.

 

We provide quality magnetic tools include, super length hydraulic arm magnetic stand, universal arm magnetic stand, high precision magnetic stand series, magnetic base series, magnetic clamping block, magnetic square, magnetic holder, magnetic steel sheet separator, magnetic separating bar, permanent lifting magnet, demagnetizer, etc. If you need more details about lifting magnet, welcome to visit our website and feel free to contact us!

 

Earth-Chain Enterprise Co., Ltd.

No.551, Sec. 1 Gangbu Rd., Wu-Chi, Taichung 43546, Taiwan

Tel: +886-4-2630-3737

Fax: +886-4-2630-3636

E-mail: ece@earth-chain.com.tw

 

Article Source: http://EzineArticles.com/6131693

 

The Facts about Press Brake Machinery

Posted on by

Most of the time metal needs to be formed before it can be used. There are a lot of ways that metal is formed. The most common is to use a machine press. A press uses some kind of force to change the shape of the metal. There are several different presses and methods to pressing metal. One kind of press is the press brake, also known as the brake press. This machine press bends sheet metal into the desired shape.

 

Angles formed with this kind of press can be extremely accurate. Depending on what kind of die is used, multiple bends can be made at one time. Press brake machinery has two frames that are the sides. They are attached to a table on the bottom with a ram or beam on the top.

 

The die and punch are attached to the table and the beam. The sheet metal goes in between the two, the punch lowers and the metal is formed into the shape of the die. When it comes to basic operation, there are 4 basic types. They break down as to the way that force is applied to the metal to bend it. Not all the methods work for all applications. Some of them are slower or less accurate than others.

 

One type of brake press machinery is the mechanical press. This kind of press has a flywheel inside the electric motor. Energy is applied to the flywheel and a clutch is used to engage the wheel so it moves a crank to lift the beam up and down. This kind of press is fast and the most accurate.

 

A hydraulic press uses two cylinders that are mounted on the sides of the press. The cylinders are synched up so that they move together. A hydraulic press is slower than a mechanical press. A pneumatic press is similar except instead of using fluid.

 

The servo-electric type of press has a belt drive or ball screw that is driven by a servomotor. The best uses of the servo-electric and pneumatic brakes are jobs that don’t need as much pressure, or tonnage, placed on the ram. Until recently, the mechanical presses were most commonly used. This is because they are fast and highly accurate. In the past hydraulic presses were much slower because they had to wait to reset. But advances in hydraulics have markedly reduced that waiting period.

 

The advances of computer controls have also made hydraulic press brakes much more accurate. They are also the safest choice. One piece of press brake machinery can be used for a number of jobs. All it takes is changing the punch and die. The punch goes on the ram. It pushes the metal down into the die.

 

The punch gives the bend it’s inside angle and the die gives it the outside angle. However, depending on the bending process, whether it is air bending or bottoming, a die might not be needed. A press brake is used to fold and bend sheet metal into new shapes. Things like brackets and cases for electronics are made this way. There are different kinds of press brake machinery as well as different processes and dies.

 

Yeh Chiun Press Brake Company develops and produces press brake machines with a reputation for superior quality and dependable services. The product lines contain CNC hydraulic press brake, NC hydraulic press brakes and universal hydraulic press brake. To fulfill the goal of producing high quality press brakes applied to machine tools at reasonable prices, the company employs the experienced staff of engineers conducting research and development in new areas of press brake machine, as well as ongoing improvement programs for current hydraulic press brakes. Yeh Chiun has ISO-9001 quality assurance system certified also certified with CE machinery directive and EMC compliance. We can satisfy customer’s requirements. If you need more details about press brakes, welcome to visit our website and feel free to contact us!

 

Yeh Chiun Industrial Co., Ltd.

No. 75, Fu Tat St, Hsi Bah Village, Wu Jih Dist, Taichung City, Taiwan

Tel：886-4-23352579

Fax：886-4-23352773

E-mail：sales@yehchiun.com

 

 

Article Source: http://EzineArticles.com/6310579

 

Purchasing a New Forklift Truck vs Forklift Truck Refurbishment

Posted on by

A forklift truck is an extremely important and key piece of machinery in any materials handling business, or indeed any trade requiring the lifting and moving of heavy loads. Any business owning and running a truck and relying heavily on its use in day to day business will be keen to ensure access to a reliable machine at all times.

 

Should the circumstances arise where one is required to consider the purchase of a new forklift truck, it is important to review all the available options in order to decide on the best course of action for your business?

 

Consider the requirements of your business, the amount of load and the number of hours you require your machine to work. There are many advantages of purchasing a new machine; however it is important to weigh up all the options carefully before coming to a decision. For some businesses with an existing truck, it may be prudent to consider the option of forklift truck refurbishment.

 

If you are considering purchasing a new truck, ensure that the specifications of any machine suggested are suitable for your requirements. If you are already running a machine you will be clear with regards to this. Any reputable dealer will be keen to supply you with the correct machine for your application and you should be asked to provide pertinent information, such as type and weight of load to be lifted, height requirements, and the environment the machine will be working within. If you are still unsure or new to using a forklift truck consider hiring a machine, before purchasing, to ensure you have selected the correct truck for the job.

 

Buying new can be an advantage when the machine is to be utilized for 40 hours or more, and it also allows one to take advantage of the latest technological advances. Some machines are more affordable than others so it is important to shop around and explore all the options. It may also be possible to obtain a lease purchase agreement to spread the cost of your forklift truck, thus making buying new a more affordable option.

 

For those looking to improve the reliability of their machine without replacing it, the utilization of a forklift truck refurbishment service may be a preferred option. Again it is important to make sure you entrust your machine to a reputable firm. Enquire as to the type of inspection that will be carried out and what it will cover. A common list of areas that should be included in an inspection is:

 

  • Mast carriage and load forks

 

  • Engine transmission

 

  • Over head charge and chassis

 

  • Steer axle and steer ram

 

  • Hydraulics

 

  • Electrics, batteries and motors

 

  • Wheels and tires

 

  • Operators seat and cab area

 

  • Exhaust system

 

  • Brakes and drive axles

 

Some companies will also carry out a Thorough Examination Inspection on completion as well as a complete re-spray of the machine as part of the service.

 

In summary buying a new forklift truck can initially be an expensive purchase, but in the long run it can be a key asset in improving the productivity of your business. Buying new allows one to obtain a machine that is perfectly tailored to the job it is required for. However for those companies, with an existing machine, who are on a tighter budget, forklift truck refurbishment can offer another solution, improving reliability and longevity of an existing forklift truck.

 

Taiwan Tailift is a professional forklift truck manufacturer and supplier. Please look around the site and if you like, contact us for more information about our company, tool catalogs, equipment and services or with any other questions you need addressing. Our experience provides us with the capability to develop solutions. Developing partnerships with our customer is important in our commitment to provide total customer satisfaction.

 

Tailift Material Handling Taiwan CO., LTD.

Forklift Truck Department

OEM & ODM Business Cooperation

5, ZiLi 1st Rd, Nankang Ind. zone, NanKang, NanTou. Taiwan, R.O.C

TEL : +886-49-2263800

FAX : +886-49-2252919

Contact: Mr. Bruce (ext. 127)

Mr. Johnson (ext.103)

Sales Mail : insales@tailift.com.tw

Head office

269, Sec 1, Shein Lin Rd, Taya, Taichung. Taiwan, R.O.C

TEL : +886-4-25666100

FAX : +886-4-25671670

Sales Mail : insales@tailift.com.tw

 

 

Article Source: http://EzineArticles.com/6601585

 

Promotional Key Chains Offer Cost Effective Means to Boost Businesses

Posted on by

A great way to boost a business is to venture on promotional schemes in order to obtain more visibility on your services, company, or sales. There is no doubt that giving away promotional freebies or free items to your customers will enhance appreciation for your services and can win you better patronage for your business.

 

A marketing strategy that will heap better competitiveness for your business is to make known your identity to the public. Promotional key chains offer a great solution for making known your company services. Custom chains can be ordered where you can opt to write your own printed message on it as a way to promote your business.

 

If you can notice there are a lot of stores and companies that manufacture or commission a company to create their own souvenir items. Most common items are key chains. There are a lot of benefits from using promotional key chains as freebie items to give. They are not as expensive and you can always get discounts from bulk orders. If you are lucky enough you can find manufacturers that offer additional number of items as freebies. This allows you to get more value for your investment.

 

Another perk from promotional chains is that they are highly customized. You can promote your business with your own personalized printed message on it. They come in various sizes as well. They can be patterned with your own preferred design and colors. You can be optimistic that you are able to advertise your business well while giving something usable for many people. Key holders are popular accessories commonly used these days. It is very practical to make them your choice of give-away.

 

With promotional key chains, you will have the confidence of enjoying a cost effective form of advertisement. Moreover, key chains are highly usable items which give its added practical value. Buying or ordering is made easier with online shops offering custom key chains. All transactions can be made online and you get the widest options when looking online for the best manufacturer of promotional key chains.

 

Your customers will feel highly valued when you give them something that they could use with their bags, wallets, or purses. Notable are car companies that provide their own key holders that bear their company logos. It has become a trademark for their services. With a promotional key chain, you find the most cost effective way of promoting your business with the practical benefits of giving your customers something that they could use every day.

 

Shuen Fuh provides high quality and the most competitive price metal key chain for our customer. Our metal key rings are suitable for promotional purposes and gifts. Moreover, our metal key chains are sold throughout the world. Welcome to contact us for the specific information of our products, the customized designs are also available.

 

 

Article Source: http://EzineArticles.com/4574461

 

Outstanding Strapping Band Machine Supplier – Jumbo Steel

Posted on by

Jumbo Steel Machinery has more than 25 years of experiences in manufacturing strapping band machines. The PP fully auto strapping band making machine features fully automatic screen changer or manual screen changer is available and two-step heating in quenching tank provides preheating function, ensuring high stretching ratio and stability. For more time-saving and high efficiency strapping band machine specification, you can browse our product category below and please feel free to contact Jumbo!

 

More strapping band machines…

 

Jumbo Steel Machinery Co., Ltd.

NO.4, ROAD 12, TAICHUNG INDUSTRIAL PARK, TAICHUNG, TAIWAN.

TEL: 886-4-23590788(Rep)

FAX: 886-4-23590567

E-mail: sales@jumbosteel.com.tw

 

Gamma-Resistant FRAM RFID Chips Enable Cradle-to-Grave Tracking of Medical Devices

Posted on by

Japan’s Fujitsu Semiconductor Ltd has developed a radiation-resistant radio-frequency identification (RFID) chip with full traceability. When exposed even to small doses of gamma radiation, the memory of conventional RFID tags with E2PROM or Flash is completely erased or corrupted. By contrast, Fujitsu’s FerVID family of products with ferroelectric random access memory (FRAM) can withstand up to 50 kGy of radiation, more than twice the industry standard.

 

FRAM is a type of memory that uses ferroelectric thin film as a capacitor for storing data, which is not lost when power is shut down. It is a high-performance, low-power technology that combines the benefits of nonvolatile memories (E2PROM and Flash) with high-speed RAM (SRAM and DRAM). Compared to other nonvolatile memories, key advantages of FRAM include a fast read/write speed, low power consumption and high endurance (10 billion read/write cycles). This tamper-resistant, secure memory is not affected by magnetic fields. Most importantly for medical and pharmaceutical applications, FRAM is radiation-resistant. FRAM’s properties combined with the tracking capabilities of RFID simplify the tracking process for medical devices and help to ensure their safety.

 

“If you embed the FRAM RFID tag in medical bags, filters, surgical instruments, syringes, tubes, or other single-use products at the time of manufacture, you can track and manage the devices over their entire lifecycle from manufacturing to sterilisation, shipping, receiving, storage, use and disposal,” says Junichi Teramae of Fujitsu Semiconductor’s Solution Engineering department. “The data stored in this tag can be shared with electronic medical records at hospitals, if NFC smart phones or tablet terminals are used as an RFID reader,” he adds.

 

The FerVID family of products, with the combination of high-impact thermoplastic materials, has also found success in medical products that undergo autoclave sterilisation. Last year, Fujitsu supplied FerVID family products to Japan’s second-largest printing company, Toppan Printing Co., which makes tags for use with disposable gauze, surgical tools, sterilisation containers and other medical products. The new RFID tags, which are fabricated from Radel polyphenylsulphone resins formulated by Solvay Specialty Polymers in the United States, withstand the high temperatures, pressure and humidity produced by the autoclave process.

 

Fujitsu’s FerVID family offers HF and UHF FRAM RFID products. The ISO 15693–compliant devices cover the 13.56-MHz operating frequency and feature 2-kByte and 256-Byte memories, respectively. In the 860 to 960 MHz UHF band, Fujitsu offers 4-kByte and 64-kByte FRAM devices, compliant with the EPC global C1G2 standard. In addition to standard ISO commands, the products feature anticollision capabilities and custom fast read/write transmission commands.

 

Founded in 1999, SAG Securitag Assembly Group is a RFID technology products manufacturer in Taiwan. We provide FRAM RFID for customers. Ferroelectric RAM (FRAM) is a memory technology that combines the best of RAM and ROM. FRAM is ideal for applications that require high-performance, non-volatile and large memory. FRAM offers several major advantages over EEPROM, including its speed, endurance, low power consumption, security, and tolerance for radiation.

 

Looking at all these features, SAG build hard tags with MB89R118/119/112 powered by Fujitsu to target demands from industrial and health care sectors. Constructed by overmolded process, these tags are certified to have its outstanding capability to reach a heavy-duty level. If you need more details about FRAM RFID or other RFID applications, welcome to visit our website and feel free to contact SAG!

 

Article Source: http://www.medtecjapan.com/en/news/2012/07/10/828

 

Premium Micropigmentation Device Supplier – Bella

Posted on by

Micropigmentation makeup is a permanent make up that it is similar to tattoo. The process of applying permanent makeup pigment is performed on men and women who wish to enhance facial features that can be used for eyebrow, lashes and lips. The pigment can lasting longer and does not need to make up all the time. There are some tips about permanent makeup that you need to know below:

 

Tattoo Gun and Rotary Machines

The tattoo gun or rotary machine uses needles and these needles vary is size and weight and may have one or numerous prongs and this is perhaps the most complex part of cosmetic tattooing aside from the actual skill of knowing the angle and how to follow a precise tattoo design or facial outline.

 

Prong Needles for Eyebrow Tattooing

Prong needles that are round may be used to add fill to the shape of an eyebrow or may also fill in a lip. The 2 prong round needles simply eject pigments more rapidly. The flat needles are often finer and best for outlines. The most important aspect of tattoo equipment that you can monitor is to ensure it is modern and that the needles are always sterile and disposable.

 

You may also discuss with your eyebrow tattoo expert which needles will be used since you are aware that there are tattooing procedures that may be better executed with a 7 prong needle and other better with a fine one prong tattoo needle. It may take less time to fill a brow or more time depending on the needle used and this will also determine the amount of trauma to eyebrow tattoos region and how much anesthetic must be used.

 

Measuring for Permanent Makeup Application

The other piece of equipment that may be used prior to the tattoo procedure is a measurement tool that helps decide where to place the brows so they are symmetrical. Your specialist may also use stencils or special markers to shape the outline of where she/he will tattoo your eyebrows.

 

Bella has produced various micropigmentation devices, pigments, needles and related eyebrow tattoo machine kits with high quality and efficiency. To find more detail information, please contact Bella, the best permanent makeup machines manufacturer for you!

 

 

Article Source: http://EzineArticles.com/3038625

 

Outstanding CNC Rotary Table Manufacturer – Tanshing

Posted on by

TANSHING ACCURATE INDUSTRIAL CO., LTD. is a specialist in the design and manufacture of a wide range of CNC rotary table and index table. At TANSHING we are dedicated to research and development and technological innovation continually.

 

From design, precision machining, to rigorous quality control, great care is taken to ensure an international quality level. TANSHING’s CNC rotary tables are widely recognized in both domestic and overseas markets. The innovative dual lead worm drive system has been patented in Taiwan which is indisputable proof of the superior R&D capability of TANSHING. TANSHING has been certified by AQSR ISO-9001 (U.S.A.). In order to ensure very high precision parts, TANSHING has invested heavily in various advanced machining equipment. 90% of our in-house parts machining allows us to fully control the parts accuracy, which provides a solid foundation for the superior quality of TANSHING CNC rotary tables and index tables.

 

TAHSHING has always dedicated itself to pursuing higher levels of technology. It is always looking to the future, to new challenges and to new levels of high technology. If you need more details about quality CNC rotary tables or other superior products, welcome to visit our website and feel free to contact TANSHING!

 

 

TANSHING ACCURATE INDUSTRIAL CO., LTD.

No. 1-1 Lane 165, Sec. 1, Tan-Shing RD., Tan-Tzu, Taichung 427, Taiwan

TEL: +886-4-2538-4978

FAX: +886-4-2538-4980

E-MAIL: tanshing@ms16.hinet.net

2016 Taiwan Machine Tool Show: The Biggest Tools, Measurement & Test Instruments Pavilion

Posted on by

Taiwan’s capability of metal processing is world-famous and precision measuring instrument is the mother of industry upgrading. TMTS gathers numerous tools, measurement & test instrument companies providing a variety of products, that satisfy the demand for professional technique, equipment, and products from machinery equipment buyers.

TMTS 2016 will showcase more than 700 companies and 4,000 booths. There are 8% increases in overall scale and exhibitor number respectively compared to the last show in 2014. TMTS established Tools, Measurement & Test Instruments Pavilion for the first time, occupied 450 booths with 120 companies, which is the biggest Tools, Measurement & Test Instruments Pavilion in Taiwan machine tool shows.

The application of all kinds of technology materials changes rapidly. To overcome the rising difficulty of workpiece processing, the key points of product selection include tool material, cutting efficiency, durability, precision and accuracy, etc. Workpiece processing not only tests tools’ capability of R&D and manufacturing but also challenges the limit of tools’ materials. In machinery processing, the quality of tools influences the efficiency of processing and profits of the industry. Besides the way of traditional manufacturing, there is a new highlight to promote industry upgrades by the collaboration between the industry and the school, and technology transfer.

WU CARBIDE CORPORATION and LIAN YI CO., LTD., both focusing on R&D, develop new products regarding tools materials and cutting efficiency. Taiwan local enterprises, such as SHIN-YAIN, BEST DIAMOND, TAIWAN ASAHI DIAMOND, HWA CHERNG DIAMOND, SPEED TIGER and YUANG HSIAN, etc., and TAIHO TOOL from OSG group Japan, have continuously advanced the development of all kinds of materials and technologies, supplying products to machinery industry, high-tech industry, and even aerospace industry.

Except for overseas companies, such as MARPOSS, MITUTOYO, and RENISHAW, Taiwan measurement & test Instrument companies are also well-known to the world. Taiwan local companies, such as ARCS PRECISION and HANN YAN PRECISION, established automatic testing systems with the use of precision measuring instruments, to reach multi-purpose of high-speed automation, space saving, testing time cut down, testing quality improvement, and cost saving.

More information about TMTS：http://www.tmts.tw

Contact Information

Company Name: Taiwan Machine Tool & Accessory Builders’ Association (TMBA)

Contact Person: Jolin Lin

Tel.: +886-4-2350-7583

Email: jolin.lin@tmba.org.tw

Website: http://www.tmts.tw

PET, TPU, or Tempered Glass – all you need to know to choose a screen protector

Posted on by

A bit of a disappointment in the past, today’s screen protectors are easier to install, cheaper, and better than ever in every aspect. There are three varieties – PET protective film, TPU (polyurethane), and our undisputed favorite – tempered glass. And then there are two methods to get them on your display – dry and wet. So here’s more about how screen protectors work and what they offer.

 

PET Film

 

Obviously, PET doesn’t stand for a dog or a cat. It means “polyethylene terephthalate” – a type of plastic that’s available in many variations depending on specific applications. In the manufacturing industry, it’s used for mundane stuff like liquid and food containers. But this doesn’t mean that PET protective films are glorified water bottle plastic. They consist of polyester film with a scratch resistant matte coating on one side and a silicone adhesive on the other. Quality ones are quite clear and add a functional anti-scratch layer to your screen, but have no impact protection. And their scratch-resistance isn’t better than what Gorilla Glass already has – it’s limited to fingernails, coins and keys. They are cheap, and usually come in packs of three or more. Their downside is that plastic is the easiest to discolor from sun rays and oil buildup from your fingers, and it doesn’t feel as nice as glass does to the touch.

 

If you have a cheaper or older phone, or you’re fine with the most basic and affordable screen protection, get a PET protector. The manufacturer doesn’t really matter, but if you have a soft spot for a particular brand, there’s no reason not to go with theirs. Chances are that protectors from established brands will be better cut-out for your device and won’t leave loose edges that can catch on to your clothes and peel the protector away (it has happened before).

 

TPU

 

TPU (thermoplastic polyurethane) is next in the screen protector food chain. This is chemically-enhanced plastic whose properties include scratch resistance, elasticity, oil and grease resistance, and increased toughness. Since the material is elastic, it has limited “self-healing” abilities. This means that its slight softness gives it the power to absorb non-extreme impact, such as most drops and lighter scratches, while retaining all or most of its original composition. For example, lighter scratches usually leave just a small dent in the soft plastic, which slowly returns to normal.

 

The “military-grade” tag most TPU protectors proudly carry is worthy of an explanation. One manufacturer says that this material is used “to protect jetfighters”. And what do you know, it’s true! Skim through this Aerospace Surface Protection brochure – it’s full of polyurethane protective tapes used for “aircraft and windmill leading edge protection”. However, getting a TPU case or screen protector doesn’t guarantee it’s made of the same quality of material. But your smartphone also isn’t a fighter jet, right?

 

If you are willing to pay a slightly higher price, a TPU protector is, logically, better choice than PET film. At the very least, it’s going to provide better impact protection (although you shouldn’t be pushing your chances). It’s also nicer to the touch, although it isn’t glass-smooth. Arguably, the best part is that you’ll get to explain to your friends and acquaintances how your phone has “fighter jet protection”. Pretty cool, huh?

 

Tempered glass

 

Protection with a temper! Tempered glass (TG) screen protectors are the absolute best you can buy. Material-wise, a high-quality TG protector is multi-layered, usually starting with shock absorbent silicon on the bottom layer, followed by PET film, and an optically clear adhesive to ‘sandwich’ the previous two layers with the next two, which are tempered glass and oleophobic coating. All of this scratch, oil, and shock protecting goodness is compressed into a <0.4mm-thick sheet that’s no harder to apply than a PET or TPU protector, and none heavier or otherwise obnoxious.

 

A glass protector is superior to its alternatives in every way. It has better light transmittance, making for a clearer display. It’s anti-reflective and glare reducing. It has oleophobic coating, which heavily reduces fingerprints. It has the smooth feel of actual glass under your fingertips. Unlike Gorilla Glass 3, it resists sand scratches, making it the only viable option for beachgoers. And let’s talk about shock protection. T-glass protectors boast a material hardness rating of 8H to 9H, meaning they are hard enough to resist scratches from anything that’s not topaz or corundum (extremely hard aluminum oxide). Yet, they aren’t completely shatter-proof. Since this is toughened glass we’re talking about, in the event of a fatal drop, the protector will absorb all the damage and break into tiny shards. Chances are pretty good that your display will end up unscathed underneath. Thus, instead of having to replace the entire screen, you’ll only have to get a new protector. This is easier on both your soul and your wallet.

 

As you probably expected, tempered glass protectors are the most expensive kind. Most renowned brands can charge up to $40 for their products. And although that’s money well spent if you are rocking an expensive flagship smartphone, excellent tempered glass protectors can be found for less than $15 online.

 

Dry vs Wet Mount

 

There are two methods for installing a screen protector – dry and wet. The method is usually specified on the box.

 

The dry method keeps the protector glued to the screen with static electricity. There’s no adhesive involved, and the application is very straightforward. In short, you’re supposed to enter a dust-free environment (either outside, or in your humid bathroom, preferably naked to prevent dust specs from your clothes), clean your phone thoroughly, align the protector and apply it. After a few tries, you will end up with near-perfect results. You don’t have only one shot at this. Most dry-application protectors will let you carefully lift them off the phone and take care of misalignment and dust particles before trying again. Some even come with an electrostatic paper band to help you get rid of annoying dust.

 

The wet application method works by spraying liquid on the underside of the screen protector. It’s a convoluted and awkward ordeal. You’re tasked with the very precise placement of a thin, wet sheet of plastic – quite frustrating, because the liquid adds weight and get the protector folding and dancing in every direction but the right one. Allegedly, wet protectors are easier to place without forming air bubbles or trapping dust, and are more resistant to peeling. If you mess up the installation at first, they too give second chances at applying them correctly. But all the phone drying, protector re-moistening and getting rid of excess liquid between it and screen is quite the patience test.

 

Wrap-up

 

With so many options available, and at very fair prices, getting a screen protector for your device has become a no-brainer. PET film products are the best choice for basic screen protection. TPU protectors can be a bit rare, but they have the best ratio of affordability and toughness. Finally, Tempered Glass protectors offer the ultimate in protection and feel, but they are the priciest of the bunch. Still, even the most expensive ones make sense for flagship smartphones and tablets.

 

Founded in 1992, Prochase Enterprise Co., Ltd. is specializing in manufacturing PET protective film and other quality protective films. In 2006, in order to match the trend and the coming years of touch screen era, we invest and set up a precise film coating company, we develop several kinds of high performance PET coating film for the smart phones, tablet pads, ultra book, LCD, digital cameras medical screens…

 

We provides a large number of quantity of fluorosilicone release liner for the world market, we also offer our famous anti-scratch, anti-glare, anti-fingerprint and privacy protective films for the world.

 

We are looking for a reliable and powerful group to be our country’s agent to sell our most of products, it is win-win business, contact us if you have interested in this agent. Be trust us! Prochase Co. is your best option!

 

 

Prochase Enterprise Co., Ltd.

Address: No.33, Yonglong Rd., Dali Dist., Taichung City 412, Taiwan.

TEL: 886-4-24066838

FAX: 886-4-24065180

E-mail: prochase@ms36.hinet.net

 

 

Article Source: http://www.phonearena.com/news/PET-TPU-or-Tempered-Glass–all-you-need-to-know-to-choose-a-screen-protector_id58204