Daily Archives: May 27, 2016

Types of Badge Clips

Posted on by

With lanyards and ID cards becoming so popular, it is important to have a secure way for the badge to be fastened to the person wearing it. The type of clip used is the key factor in the whole design of identification cards and badge holders, because it is what prevents the card from being lost or damaged. If the ID badge clip is weak or fails to work properly, it will be insufficient and not work the way it was intended.

 

The identification card could be lost or damaged if the clip breaks or becomes too weak to securely hold the ID card in place. This is why companies offer a variety of different types of ID badge clips that will work in most any kind of environment, ranging from factories, hospitals, construction sites to office settings.

 

Right Way to Choose Badge Clip

You will need to choose the type of badge clip based on the type of environment it will be worn in and where it will be attached to the wearer. For example, will they be clipped onto a belt, shirt, jacket or so forth? This does make a difference. If it’s going to be hooked onto a place where it can be hit or caught on something, then it needs to be strong enough not to fall off each time it gets bumped.

 

Some clips are lightweight and others are designed to be heavy-duty. If your employees work in an office setting, then a simple and lightweight design will be fine. However, if the employees wear suits and other expensive clothing, you don’t want a clip that will cause damage to their outfits. Instead, you may want to choose one that is attached to a lanyard or some other type of holder.

 

If they work under rough conditions where it will get bumped and knocked around often, then a heavy-duty clip would be your best option. You need to choose something that is strong and has a good grip so it won’t come loose easily.

 

Basic Information

When choosing a specific style, you should make sure that the badge clip you choose is convenient for your employees to use. Some of the styles can be a little difficult to clip on. If the ID card needs to be taken on and off a lot due to security reasons, this could end up being a big problem.

 

A few of the different types of badge clips that are available on the market today include the alligator style, bulldog, plastic, steel badge, pressure sensitive, thumb-grip, slide-type, rubber tip and the smooth face badge clip. There are still many more to choose from so you should spend a little time examining the difference between them. This will allow you to wisely make an informed decision.

 

The badge clip may seem like a simple and insignificant item, but in reality it is a vital part of the ID card and should be considered carefully. Take your time and think about everything involved before making your decision.

 

Established in 1969, TAY YOUNG Industrial is a professional name badge clips manufacturer and supplier with more than 30 years of mature experience. TAY YOUNG’s plastic badge clip and strap clips have high quality, competitive prices and prompt delivery competitive advantage. Welcome to contact us for more ID Badges clips specifications. TAY YOUNG would be your best partner in the future. We also offer various and customized products. Please contact us for more information.

 

Article Source: http://EzineArticles.com/1408498

About Electromagnet Lock

Posted on by

An Electromagnet (EM) Lock is a locking device that consists of an electromagnet and an armature plate. There are four main types: U-bracket for glass door without frame, L-bracket for a narrow door frame, LZ-bracket for in-swing door and the regular installation lock.

 

How It Works

The concepts of electromagnetism apply here. When energized, a current passes through the electromagnet and attracts the armature plate with such a force that it shuts down the door. When both the plates attach with each other, they are literally inseparable unless made to do so using the valid key. That valid key is what is called the switch meaning the tool that can break the strong magnetic field.

 

An Electromagnetic manufacturer has to ensure that wiring inside the plates is done with no fault. Electromagnets have a high attracting power because of a high flux density created by the magnetic field of the coil inside the device. This is because of the solenoid wire inside.

 

And this is the precise reason why use of such a device is a safe option.

 

Installation

EM locks installation should always be done on the inside (the secure side). Most installations are surface mounted. For safety reasons, cables and wires should be inserted in the door.

 

Installation is quite easy but there are different methods of installation for different types for e.g. the installations of a U-bracket would be different from that of an L-bracket lock.

 

Advantages

  • Strong and sturdy
  • Easy to install
  • Huge magnetic holding force (safe)
  • Very suitable for emergency and fire exits
  • Quick to operate

 

Disadvantages

  • Requires a power source continuously
  • Can be disconnected in the event of a power outage disabling security
  • Expensive compared to the mechanical locks

 

Categorization

An EM lock is categorized as a “fail-safe” and “fail-secure” device.

 

With fail-safe, when power is lost from the device, the lock automatically de-energizes and releases allowing free access. Whereas in fail-secure, power loss is not a concern as it remains intact.

 

Hence, a fail-secure device is your best friend in a panic room situation (for thieves and burglars) as it won’t open without electricity and a key, while a fail-safe device is useful in an emergency situation (in case of fire).

 

Conclusion

In modern times the use of such devices are on a rise which is an excellent tool in the field of security. Compared to its mechanical counterpart, it sure bags points for being a safer option. However, the most important aspect of the device is its dependence on power. How the future can help in resolving this issue remains to be seen!

 

If you are looking for quality electromagnetic locks, then you are in the right place! Pongee has specialized in series of auto identification systems and related accessories since 1987, we manufacture only the best products. The EM locks (Electromagnetic locks) are designed with different holding force electromagnetic and magnetic lock. To see more specification about our EM lock series, please browse the product introductions and feel free to contact Pongee!

 

Article Source: http://EzineArticles.com/9179009