Chevalier, Your Best Double Column Machining Centers Manufacturer

If you are looking for machining centers, Chevalier would be your best choice. The company can offer great rigidity and infallible precision double column machining centers to you. Below, I will introduce one of outstanding machines made by Chevalier – that’s FVM-DCL Double Column Vertical Machining Center.


Double Column Vertical Machining Center


Chevalier Double Column Vertical Machining Center


The FVM-3016DCL II Series is Chevalier’s excellent double column vertical machining center.


The ribbed Meehanite cast-iron base is designed to ensure the rigidity and stability of the machine. The oversized column and box-type beam construction provide support and damping character. The cross rail is designed by three rigid 55mm linear roller ways that support the load in both vertical and horizontal directions.


The entire X-travel of the table is supported by twelve pieces of sliding blocks to eliminate overhanging issues. The Z-axis uses two 80mm box way structures for improved rigidity and cutting support.


The spindle motor, ball screw and double counter-balancing cylinders are situated to avoid unequal torque and preserve structural accuracy. A forced circulation cooling and lubrication system is applied to the spindle and bearings to reduce thermal strain on the spindle and extend its life span.


The table size is 122” x 57” with a table load of 17,600 lbs. The maximum part height under the spindle is 38.6”. The distance between columns is 70.9”.


The 35HP, FANUC high-torque digital spindle motor with 2-speed gear transmission produces high-torque machining capability at low-speeds and better surface finish at high-speeds.


The FANUC 0i-MD is a standard control feature with an 8.4” TFT LCD display. The 0i-MD control also comes with the AICC high-speed machining contour control. It has 3-D interpolation contouring control and an optional 200-block look-ahead function.


For more information about double column machining, please visit the Chevalier website:



Article Source:

6 Common Problems with Mesh Office Chairs

Ever since the Aeron chair burst onto the scene many years ago, mesh office chairs have been extremely popular. Mesh chairs are very unique; from their original styling, to the way the user feels when they sit. Because of their popularity, almost all office chair manufacturers now have their own version of a mesh chair. This means that the market is now flooded with mesh chairs ranging from cheap import chairs to very high end ergonomic chairs that are made to order in the USA. The mesh office chair topic is very polarizing as can be expected with any popular item. People seem to either love mesh chairs or hate them. In this article, we will share with you the downsides to mesh office chairs and the reasons why they are not a fit for every customer.


Before getting started it is important to understand that there are three distinct types of mesh office chairs. The first type is a mesh seat and back with no padding. Mesh is simply stretched across a chair frame on the seat and back. The second type is a mesh back with a padded mesh seat. This chair will have a seat that feels like a typical padded office chair but the backrest will have mesh stretched across the frame. The third type is a padded mesh seat with a padded mesh back. These models use the mesh upholstery for looks, which creates a feel very similar to traditional office chairs.


  1. Mesh Seats with No Padding Can Sag or Be Too Stiff

One of the biggest problems with a mesh chair is that it is very difficult to design a mesh seat that is both comfortable and supportive. A mesh office chair will almost always be too soft or too hard. Most higher-end mesh chairs will be upholstered with a soft mesh while lower-end chairs will typical have a hard mesh. A softer mesh will be more comfortable initially for the user. It will feel smoother and will expand further which can create a more comfortable sit. The mesh will sink down a bit more and give the user the feeling of floating; this is something that many mesh chair users rave about. But, mesh that is allowed to stretch and contract a substantial amount over and over will eventually sag; this can lead to the customer having to replace the seat or whole chair. The other major problem with soft mesh is that expands and contracts more than hard mesh so it will not properly disperse your weight over the entirety of the seat. Instead, the mesh will create an uneven flex point that causes the majority of the pressure to be placed on the tailbone. This can cause pain, numbing or discomfort after using the chair for an extended period of time.


A hard mesh will be much more consistent in its performance over time but the comfort level is very low to begin with compared to soft mesh. The flex point described above will not be nearly as pronounced but there will be no chance that the user experiences a feeling of floating. The seat will be much too hard not to notice the seat. A hard mesh seat will feel similar to sitting on a surface like wood than a typical office chair constructed of foam and fabric.


Suggestion: Some products with soft mesh seats, linked above, have become incredibly popular. We recommend only using these types of chairs for less than eight hours per day with multiple rest intervals throughout the day to get out of the chair and walk around; this will help to reduce the tension caused to the tailbone as described above. We do not recommend chairs that feature a hard mesh seat.  There are many alternatives out there that allow a user to pair a mesh back with a padded fabric, leather or vinyl seat; this will result in a more comfortable sit as well as a more cost effective option.


  1. Mesh Can Be Abrasive to Skin and Clothing

Mesh upholstery is much coarser than leather or fabric upholstery so there is a higher chance for the coarse material to cause abrasions to the skin or damage to clothing, such as dress pants. It is important to understand that there is a wide range in the quality of mesh used on office seating. Better quality mesh will be soft and smooth compared to lower quality mesh. This helps to reduce the likelihood of skin irritation or clothing damage. Mesh is upholstery made completely out of man-made materials, unlike leather. In some instances, the polypropylene, polyethylene, nylon, PVC or PTFE can cause skin irritation to the user.


Suggestion: Our first recommendation is that users with any type of allergy to polypropylene, polyethylene, nylon, PVC or PTFE should avoid mesh office chairs because of the discomfort it may cause to skin. We also recommend periodically checking your clothing for any wear being caused by the mesh. This is especially important on items such as dress pants, dress shirts or clothing made from soft materials like silk. Our final recommendation is to avoid having bulky or bulging items like a wallet or cell phone in your back pants pocket. Extra wear can often be found in areas where bulky objects are present.


  1. Mesh Is Difficult To Clean

Cleaning options with mesh are going to be more limited than other chair upholsteries. Non-padded mesh can easily be dusted with a vacuum; however, cleaning the chair with paper products like napkins, paper towels or toilet paper will be more of a nuisance than a help. The mesh upholstery will shred the paper products and add to the mess. Using a cloth towel and water can also be a bit risky because the friction caused by scrubbing with a towel combined with getting the mesh wet may make the mesh fray or split apart. Padded mesh will be even more difficult to clean. Along with the problems of using paper products or a cloth towel and water, padded mesh will also be very difficult to vacuum since many of the dust, dirt and food particles will be in-between the mesh and seat foam.


Suggestion: Prevention is going to be the best method to keep your mesh chair clean. Avoid things that will add to the potential of the chair becoming dirty, such as: eating at your desk or wearing dirty clothes/uniform in the chair. Try to keep the area around the chair as clean as possible to reduce dust and dirt that can become present on the mesh. If you do need to clean the mesh, first try a vacuum. Make sure to be very gentle and avoid pressing down on the mesh. Let the vacuum hover just over the mesh. If a towel and solution is necessary, then gently rub the dirtied spot with a soft cloth and soapy water and allow to air dry.


  1. Mesh Is Not Versatile

Mesh isn’t usually the preferred choice of designers because it limits their ability to customize a space to their taste. There are many different mesh chairs on the market but most of them have very similar looks with a very limited color selection. Mesh is mesh and there isn’t really a way to dress it up. Some manufacturers offer different color options but the ability to choose between different patterns in order to create a unique office design isn’t going to be as easy as it is with fabric chairs.


Mesh is not a good option for industrial, manufacturing and warehousing applications because the mesh will act as a net, trapping small materials that will be very difficult to remove. Things like metal shavings, sawdust and chunks of plastic can damage the mesh or cause injury when someone unknowingly uses a mesh chair with an object lodged into it. Workers in these environments often carry tools that can be sharp or strong enough to puncture or rip the mesh when the user sits down. This is another hazard for a mesh chair in an industrial environment.


Chairs with mesh seats are not ideal for call centers or 24/7 work areas, like dispatch rooms. Mesh seats are not built to withstand the constant wear and tear of a round-the-clock application and are also not comfortable for 8-12 hours shifts due to the challenges mentioned above.


Suggestion: We recommend that mesh chairs be limited to applications like offices, schools and conference rooms. Mesh chairs fit better in these areas because the user is often sitting in the chair for a couple hours at a time and the environment will not be destructive to the chair.


  1. Mesh Creates a Cooler Office Environment

The biggest selling point for mesh office chairs is always the breathability. Airflow and keeping you cool is touted as the biggest positive by almost every mesh chair manufacturer. This selling point is only a positive for limited applications and users. If you live in a place like Florida or Arizona and your office has the windows open, then the breathability of mesh seems like the only way to go. For someone living in a cooler climate like Minneapolis or in a work area that has the air conditioning on high, then the breathability of mesh seems like a moot point and can be a disadvantage. Unless your office environment is warmer than a typical office environment, which is usually around 68-74 degrees, then the “cooling effect” of mesh is no longer an overall positive.


The breathability and “keeping you cool” selling point is also rarely a positive for half of the people using a mesh chair, which are women. Studies have shown that women feel cooler on average compared to their male counterparts. [i] Women are more likely to be chilly when men are comfortable, and more likely to feel comfortable when men are warm. Mesh chairs only exacerbate this problem and will often cause women to be uncomfortable due to being too cold.


Suggestion: We do not recommend purchasing mesh chairs solely due to their ability to keep the user cool unless the environment is abnormally warm compared to a typical office. If you decide to use a mesh chair it’s important to keep in mind that you may require warmer clothing to stay comfortable.


  1. Frame Can Be Uncomfortable

Since most mesh chairs are designed with little to no padding, the frame can often become more pronounced to the user. On a padded office chair upholstered in leather or fabric, the user will not come into contact with the chair frame because the foam padding will spill over the frame making for an even sit over the whole seat. Mesh chairs will be constructed by stretching the mesh over the chair frame and since there isn’t padding, the user’s legs, butt, back or shoulders may come into direct contact with the chair frame which can be uncomfortable. Another problem that may occur is reduced blood flow to the lower legs due to the front of the chair seat frame cutting off circulation. Some chair models do a better job than others to help alleviate this problem. A waterfall seat shape is a design that has a seat front that drops off dramatically which helps to reduce poor circulation. Other chair models may place a small piece of foam on the chair front only, in an effort to help reduce this problem.


Suggestion: Look very closely at the chair frame with respect to the mesh around it. If there is a thick plastic frame that is visible outside of the mesh, then there is a strong chance that the problems described above will be present. Try avoiding these types of chairs. If you have already purchased a chair with these problems and are looking for relief, then try placing a folded piece of clothing or small piece of foam over the portion of plastic that is causing discomfort.


Final Thoughts

While there are many positive aspects to mesh office seating, the negative aspects can often be too overwhelming to justify going with a mesh office chair over a standard office chair. It is important to consider many factors in the work environment if mesh is going to be the ideal choice. Who is going to be sitting in the chair? What length of time will the chair are used per day and per sitting session? What is the average temperature in the work environment? Is the customer okay with limited colors and designs? For specific applications and users, mesh can work out great but it may not be the best fit for everyone.


Have any interest in mesh office chairs? Try to visit the website of VOXIM, the company of specializing in kinds of office chairs, to learn more information about ideal mesh chairs.



Article Source:

Analysis, and Forecast Report of Automatic Capping Machine Market Size

Do You Know What A Capping Machine Is?


The automatic capping machine is manufactured with a high quality of raw materials and by using the latest technology. The automatic capping machine is durable, flexible and works with different types of containers and caps.


The automatic capping machine provides durable finish standards, rust proof, and flawlessly finished packaging. It has a wide range of applications in several industries, such as used for packaging of different varieties of bottles includes Glass and plastic bottles.


Moreover, the global automatic capping machine is used in packaging of a variety of caps such as Ropp, screw, crown, corks and Snap-On-caps. The automatic capping machine saves the time of manufacturers for capping of the bottles of the product. And it can ensure that caps are properly tightened so that product meets perfection when it is sent to the market for sales.


The Growth of Capping Machines Market


The global automatic capping machine market is mainly driven by a rise in food and beverage industry. An increase in demand for packaged foods leads to rising in automatic capping machine market.


Developing regions such as Asia-Pacific leads to have a significant opportunity in the expected year owing to changes in food and beverage industries and pharmaceutical industry.


Further, the capping is a usually difficult aspect in liquid packaging line due to several reasons includes a range of sizes of caps and bottles; therefore automatic capping machine components become expensive in the specific type of capping machines which increases the capital cost of machinery leads to restraining the growth of automatic capping machine. Owing to rise in the capital cost of machinery manufacturers prefer less of automatic capping machine.


Automatic Capping Machine and Global Market


Based on the geographic region, global automatic capping machine market is segmented into seven regions includes North America, Latin America, Japan, Eastern Europe, Western Europe, Asia-Pacific excluding Japan, and the Middle East and Africa.


The North America region has high CAGR in automatic capping machine market owing to technological advancement and demand of packaged food and beverages followed by Europe, Japan.


Developing regions such as Asia-Pacific region leads to have an opportunity in forecasted period owing to changes in pharmaceutical and food and beverages industry which leads to a growth of capping machines market in an anticipated year.


You Can Find Excellent Automatic Capping Machine at KWT


Having reliable automatic capping machine is essential in liquid packing line, different types of capping machine will be involved in the capping process depended on the closure type and package shape. KWT carries versatility capping solution for different scope of packaging line. More details about KWT automatic capping machines, try to check out here:


By the way, if you need further report, welcome to visit: Digital Journal



Article Source:

Benefits of Using An Automatic Coil Winding Machine

A coil winder is an integral part of all electrical devices present in the manufacturing companies. In such companies, every device either transforms the current or voltage from one rating to the other. To produce these components, a coil winding machine winds the magnetic wires in a circular form over an iron core having magnetic properties. A little additional equipment is also necessary to wind these components.


Coil winding machines perform many other tasks apart from winding electromagnetic coils on an iron core. A special type of coil winding device called the automatic winding machine comes with many features.


The following are the uses of an automatic coil winding machine:


  1. In electrical industries, it can be used for the production of transformers,
  2. It is used in electrically driven motors called AC drives,
  3. It is widely used in solenoids and various other electrical devices.
  4. It is used in telecommunication industries that require automatic winding machines to run transformers.


Thus, an automatic winding machine will be in demand till we keep using electrical devices like motors, solenoids and transformers. These devices are for industrial use. However, we need coil winding machines for our home appliances too. Mixer- grinders, air conditioners, fans etc. all require this machinery fitted into them.


We also understood that to facilitate a manufacturing process any industry would require an automatic winding machine. Moreover, they also require different types of additional equipment to add value to the production unit.


Remember that by using a coil winding equipment will significantly decrease your production costs. These machines are available with various manufacturers. If you are thinking of buying little equipment, you can also search online for reputed manufacturers and sellers of automatic winding machines. A little research will help you make a good buying decision. Firstly, you will have to consult the various manufacturers you have shortlisted and ask them for a quote. Then, you must check whether their add-on equipment is compatible with your automatic winding machine. This equipment would basically include an auto feeder, a bobbin holder, a bobbin remover, inductive parameters measuring equipment and many more.


If you are interested in learning more information about coil winding machine, I recommend that you can visit the website of DETZO Co., Ltd.


DETZO provides automatic machine line, coil winding machine, pin inserting machine, and more machines for customers. Need more details, please feel free to send inquiry or contact with DETZO directly!


Your Best Global Partner for Coil Winding Machines – DETZO



Article Source:

4 Ways to Make Your Own Hand Embroidered Patches

DIY Embroidered Patches

Want to add some personal style to your favorite denim jacket or bag? Buttons, pins, badges and patches are a fun and popular way to do that, and DIY embroidered patches are so easy to make!


You can find embroidered patches available to order online–there are so many to choose from–but the beauty of making them yourself is that you can have any design you want. Plus, you can personalize them!


This tutorial will walk you through four methods for making and attaching your handmade patches. For each of these, choose patterns based on how large you want the patches to be. There’s no rule for this, but smaller designs, such as the elements in the fruit pattern, work well.


While there are four distinct methods for making patches, you’ll find that you can mix and match some of the techniques. For example, you can make a felt patch with adhesive, or a pin with different edge stitching. Have fun experimenting with these four DIY patch making processes!


Iron-on Patches Step 1

Iron-on patches are fast and easy to attach, which is always helpful. Plus, you can give these patches as gifts. Just include some simple iron-on instructions!


Instructions for Iron-on Patches

  • Choose a pattern, marking it with the transfer method that works best for the fabric you’re using. Stitch the design, leaving room around the edges. Cut a second piece of fabric to a similar size, as well as two pieces of paper-backed fusible web.
  • Iron one piece of fusible web to the non-embroidered piece of fabric. Be sure to follow the manufacturer’s instructions, and watch that you place your iron on the paper side.


Iron-on Patches: Step 2


  • Peel the paper off the fusible web and place the fabric, web side down, on the back of the embroidered fabric. Iron the non-embroidered piece to fuse the layers together. This will give your patch more stability and help prevent the edges from fraying.
  • Iron the second piece of fusible web to the plain back of your fused patch and remove the paper.


Iron-on Patches: Step 3

  • Cut around the embroidered shape, following the lines of the motif and leaving some space around the embroidery.
  • The fusible web will help prevent fraying, but you can also stitch a line of running stitch near the edge to add extra insurance against fraying. Plus, it looks cute! To make your patch look more like those that are commercially made, use whip stitch around the edge as shown in the pin patch tutorial below.
  • When you’re ready to attach your iron-on patch, hold it in place and iron the patch from the back of the item you’re attaching it to. Make sure your iron is on a high enough setting for the heat to get through the layers.
  • If you are attaching this to an item that will be washed regularly, you may want to wait and add the line of stitching after it’s ironed in place.


Felt Sew-on Patches

This patch style requires minimal edge finishing because the felt won’t fray like other fabrics. It’s also sewn in place, so you know that your stitching won’t go anywhere!


Instructions for Felt Sew-on Patches

  • To embroider on felt, mark the pattern with water-soluble stabilizer or the tracing paper method. Be sure to arrange the embroidery so that there is ample space around the design for trimming the patch.
  • Embroider the pattern however you like. Satin stitching looks great on small patches, but you can also stick to all outlines.
  • When the embroidery is done, remove the markings.
  • If you used the tracing paper method you will need to carefully tear away the paper. For the water-soluble stabilizer method, soak the finished stitching and when the material dissolves, let the felt dry flat.
  • If you are using wool or wool blend felt (which hold up the best), it is very important that you use cool or room temperature water when you soak the embroidery. Warm water will cause your patch to shrink.


Felt Sew-on Patches: Step 2

  • Finish the patch by cutting around the embroidery.
  • You can loosely follow the shape of the stitching as shown or cut out a regular shape, such as a circle or hexagon.
  • The sample has nearly 1/4″ of the felt showing so there is plenty of space for sewing the patch onto something. But you can cut much closer. Just be sure that you don’t cut the stitches or trim the felt so close that the stitches fall out.


Felt Sew-on Patches: Step 3

  • To attach a patch, pin or hold the patch in place where you want it.
  • Stitch around the edge with regular embroidery floss. You can use blanket stitch or whip stitch, as you would with appliqué.
  • Felt patches shouldn’t be washed frequently. When they do need to go through the laundry, use the gentle cycle or place the patched item in a delicate bag or pillowcase.


Self-Adhesive Patches

Want a permanent patch that you can attach like a sticker? This is the method for you!


Instructions for Self-Adhesive Patches

  • Transfer your pattern onto any fabric that you like stitching on. Placing the design on the bias of the fabric prevents excess fraying later.
  • Cut a piece of stiff, heavy stabilizer and layer it behind the fabric as you place it in your embroidery hoop. Stitch the pattern through both layers. Getting through the stabilizer can take effort, so be sure to use a strong needle.


Self-Adhesive Patches: Step 2

  • Trim around the embroidered shape, leaving a bit of space for stitching the edges. For this method of patch making, cutting more geometric shapes is best.
  • Stitch around the edges of the patch with whip stitch or blanket stitch.


Self-Adhesive Patches: Step 3

  • Use permanent peel and stick fabric adhesive on the back of the patch. This material comes in sheets or on a roll as shown. Cut a single piece or strips to fit the patch within the stitched edges.
  • To attach the patch, peel off the self-adhesive backing and press the patch onto your backpack or even a notebook. Just remember that this type of adhesive is permanent, so removing your patch could prove quite tricky!


Removable Pin Patches

For those times when you want to sport a patch temporarily, why not make a pin that looks like a badge? This method is also great for gift-giving!


Instructions for Removable Pin Patches

  • Transfer your embroidery pattern onto fabric and stitch the design. In this example, the fabric provides some fill color for the embroidery.
  • Cut around the stitching, leaving 1/8″ to 1/4″ depending on how much of the edge you want to show. Cut a piece of felt that matches the shape of the embroidered piece.
  • On the back of the felt piece, sew a bar-style pinback. Be sure that you’re stitching on the correct side of the felt so that they will match up when the wrong sides of the pieces are facing each other.


Removable Pin Patches: Step 2

  • Hold or pin the two layers together and, using three strands of embroidery floss, start whip stitching around the edge. Hide the starting knot between the layers, coming out the back.
  • Go down through the front to the back, making the stitches very close to each other. They should look like satin stitch.
  • When you run out of thread, tie it off with a knot close to the felt, thread the needle through a few stitches on the back and trim the thread. Start your new thread just as before.
  • Attach your new pin to a jacket, and then move it to a bag, to a sweater and more!


If you like or need more information about embroidered badges, I recommend that you can visit the website of Dah Jeng Embroidery Inc. The company provides kinds of embroidery items including embroidered patches, 3D embroidery, embroidered emblem, chenille patches, sublimation transfers, etc. Learn more details, welcome to click here:



Article Source:

Your Best Welded Mesh Turning & Stacking Machine Manufacturer – Jiu Tai Precision

Established in 1983, Jiu Tai Precision Industries Corp. is a remarkable welding equipment manufacturer specializing in welding equipment and wire mesh especially for welded mesh, chain link fence and conveyor belts, which are outstanding among the counterparts.


Sticking to the business concept of making the best better and pursuing perfection, the company dedicates to product research and development all the time. Its excellent quality, great trustworthiness and moderate price earn scores of praises.


Jiu Tai’s stacking machine is one of their excellent machines. Here, I am going to simply introduce this machine below:


Automatic Welded Mesh Turning & Stacking Machine

JT-MTS Series
JT-MTS Series Automatic Welded Mesh Turning & Stacking Machine
The welded mesh turning & stacking machine comes with a user-friend and straightforward control panel. It is designed to turn / flip the mesh in order to reduce the height during shipment or to be stored as stock in the factory to save space and is mainly required for meshes with bigger wire gauges.
JT-MTS Series Stacking Machine - Conveying Rollers
The conveying rollers will transport the finished stack of meshes out when the target sheets are achieved. (e.g. 30 sheets per stack)

If you have any interest in this stacking machine, try to visit Jiu Tai’s website: And feel free to send inquiry or contact them to gain further details about this machinery.



Jiu Tai Precision Industries Corp.

No.36, Minyou St., Douliou Industrial Area, Yunlin, Taiwan

TEL: 886-5-5570911

FAX: 886-5-5570916


A Guide To Choosing The Right Fishing Waders & Boots

Waders and wading boots are an important addition to your fly fishing gear. Wading will give you access to water that you would not otherwise be able to cast to. They will keep you dry and dedicated wading boots will provide you with secure traction when walking and wading through the water.


Waders and chest waders in particular, are becoming ever more popular with all fly anglers. Increasingly, Stillwater trout anglers are now taking advantage of the benefits of having a totally waterproof lower half to their clothing. Great for avoiding the dreaded ‘soggy bottom’ if you need to sit down on damp grass or wade just that little bit further than thigh waders will allow.


Which Type Of Waders Are Best For Me?

Choosing a pair of waders can be a little daunting. There are two main types:


These have a boot already welded to the bottom of the waders and are first choice if you need to get the waders on and off quickly and don’t have to walk too far. Perfect for a salmon beat with good vehicle access and easy wading conditions. The downsides are less size options – (many will find it hard to get a good overall fit) and the lack of ankle support compared with a purpose designed wading boot.



These have welded neoprene socks to take your foot but require a pair of wading boots to be used over the top of them. Your foot is water proof but the boots are designed to be submerged in the water for long periods. There are wide choices of fittings available and the boots are very comfortable to walk long distances in. They also protect your feet from the rocks on the riverbed – it is easy to injure your ankle if your foot gets trapped between rocks and you stumble.


What Is The Best Material For The Waders?



It’s generally accepted that the versatility and comfort of breathable waders makes them an essential part of the fly fisher’s wardrobe. Waders now have a range of user-friendly functional design improvements made possible by recent technological advances in fabric performance and manufacturing techniques that enhance durability and wearer satisfaction.


A range of breathable fabric technologies are used in our wader range – here are some examples:-


  1. GORE-TEX – The best known brand of waterproof, breathable and windproof fabric, licensed exclusively to Simms for use in waders. You can expect the highest standards of performance from any product bearing the Goretex label.
  2. H2No – This is Patagonia’s high performance breathable membrane designed to be used in combination with their HydroStorm fabrics and Deluge DWR (durable water repellence). H2No pressure tests at 20,000mm when new and 10,000mm after being subjected to Patagonias own Killer Wash Test that replicates many years real world use.
  3. F 3.5 Fabric Technology – Used in Vision’s Ikon waders to give a pressure test of 13,000mm and breathability of 5,500g/m2/24hrs
  4. Vapour-Tec – used in Snowbee’s new ‘Soft Touch’ breathable wader technology, it gives superior breathability of 4000g/m2/24hrs and hydrostatic water pressure resistance of up to 20,000mm.



We also stock a range of waders made from Neoprene, PVC and Nylon materials. These are boot foot designs and are available with studded and cleated soles. They offer a less expensive option for infrequent fishers, emergency use for flooding and garden pond maintenance etc.


  1. Neoprene – This material has great insulation properties and is very durable, perfect for cold conditions particularly for this less active angler.
  2. PVC & Nylon – These models offer affordable and robust waders, they are lighter than neoprene waders but lack insulation.


Choosing The Best Fit Possible

Waders that fit correctly will be far more comfortable and last longer – a major advantage of premium brand waders is the wider range of sizes on offer. It is possible to have waders made to measure with some brands – please enquire at our stores for details. Aim to have a minimum of loose material whilst ensuring that you are not stressing the seams if you crouch down. The same applies to the neoprene feet – if they are too tight, they will become uncomfortable and too loose, you will have folds of neoprene inside your wading boots that will compromise the fit of your boots.


Repairing Waders

Unfortunately all waders are susceptible to puncture and tear damage on the riverbank and care is needed to ensure this is kept to a minimum. Minor repairs to waders can be made in the field or at home, we recommend more serious tears and large damaged areas are dealt with by the manufacturer.



Here’s how to repair minor damage.


  1. Dry the waders inside and out. Then turn them inside out and try to locate the puncture. If this is not visible to the naked eye, spray Stormsure Leak Doctor in the area and look for any dark patches that appear. These indicate an area of damage – mark by circling with a marker pen.
  2. If you are in the field apply a thin coating of Loon UV wader repair to the area (away from sunlight) and expose to either sunlight or a UV torch light to cure. If you are indoors use a thin coating of Aquasure and leave the repair on a level surface overnight to cure. Avoid allowing Aquasure contact with skin – use a brush or a polythene bag/glove as a barrier.
  3. If the puncture is large enough to allow glue to seep through to the outer surface of the waders, seal the hole with sticky tape on the outer surface first. Remove the tape when the Aquasure is fully cured.
  4. Continue fishing!



These can be repaired in the same way as above, but Stormsure is no longer used. You may find leaks by filling the waders with water and looking for signs of water seeping out, marking it with a waterproof pen and applying Aquasure to the affected area. Larger holes can be patched.


Looking After Your Waders

Here are some simple guidelines that will ensure you get optimum performance from your waders at all times.


  1. Dry your waders thoroughly inside and out before storage. As the neoprene feet do not breathe you will need to turn the feet completely inside out to achieve this. Leaving them damp will allow mould to get established – the first sign of this is the tape that goes around the seams will become detached as the mould attacks the glue. Avoid this by keeping them dry and clean.
  2. To ensure maximum breathability you will need to wash your waders regularly in a detergent free soap based cleaner – we recommend Nikwax Tech Wash. It will revive both breathability and water repellence. Nikwax can be used in a washing machine in accordance with the garments washing instructions. Bear in mind that to function correctly breathable fabrics must be clean to allow the passage of water vapour through the material.
  3. Use Revivex spray to restore the water repellence of the waders outer surface after washing – water should bead off the fabric surface when you emerge from the water. If your waders look dark when you come out of the water they have absorbed water and need to be treated.
  4. Store waders on a hanger in a cool dry place away from direct sunlight. Ensure there is no possibility of rodents getting to them.


  1. Dry waders thoroughly after each use, turn inside out, dry, and then reverse.
  2. Store hanging up in a cool dry place.


Which Soles Are Best For Your Wading Boots?

There are two basic sole types in use on wading boots:


  1. Felt – This material has stood the test of time, and on some surfaces is unbeatable. Felt provides excellent grip on rock and gravel surfaces, particularly smooth rock often found on riverbeds. It’s not so good on muddy banks where the felt gets blocked by fine particles making the boots very slippery indeed. On snow it’s a nightmare – snow sticks to the felt and you get taller as you walk along! A number of metal studs screwed in around the edge of the sole (2cm from the edge) will help you maintain grip on slippery surfaces. Don’t overdo these – too many will impair grip. In some parts of the world felt soles are no longer permitted – this is because they take longer to dry and have been linked with transferring bio hazards between watercourses. Check before travelling.


  1. Rubber/Plastic Compound Soles – These soles provide superior grip on muddy banks and are the preferred choice for anglers who hike a long way to their fishing spot. They are more durable than felt and can be studded if required. For general use they are a better option for most situations but not all! Anglers who fish a lot may prefer to have two pairs of boots to match the terrain that will let you enjoy the best of both worlds!


Recommendable Waders Manufacturer

Neoprene fishing waders production is the specialty at PACIFIC EAGLE. The company has developed expertise and resources which are unparalleled. To get more information about Neoprene waders with boots, try to visit their website and feel free to send inquiry or contact with Pacific Eagle directly.



Article Source:

What Is A Tap Reseating Tool?

Tap reseating tools are plumbing tools used to repair water taps. They are hand tools, but there are attachments available that adapt them for use with a drill. There are two different designs of tap reseating tool, but the variation does not affect performance. They are for use on different tap designs.


Tap reseaters are used to fix one of the possible causes of a leaking tap. A leaking tap can be caused by multiple things and is dependent on the type of tap you have. A leaking tap is most commonly caused by general wear and tear of its parts.


Tap reseating tools repair compression washer taps. The flow of water from a compression washer tap is stopped and started by the movement of a rubber stopper (washer) against a hole (seat) inside the tap body. Tap reseating tools repair the seat of a tap.


What Is A Tap Reseating Tool Used For?


Tap reseaters fix that leaking tap that gets on everyone’s nerves. There are several things that can cause a dripping tap such as a damaged seat. A damaged seat can be easily fixed using a tap reseating tool.


The tap seat is subject to constant use. It is directly below the washer, which is moved up and down every time a tap is used. This movement, along with its constant contact with water, wears down the seat and causes corrosion.


The tap seat is especially delicate in hard water areas where lime scale can build up. The tap reseater can be used a number of times to grind down the seat, but eventually the whole tap will need to be replaced.


Tap reseating tools can also be used for repairing stopcocks in the same way they repair taps. Stopcocks are used to turn off the water supply to internal outlets.


How Does A Tap Reseating Tool Work?


A worn down or built-up seat causes unevenness. This means that when the washer is down there may be room for water to trickle through; causing a drip.


The tap reseating tool grinds away any unevenness on the seat so that it is smooth. This means that the washer is able to sit flush on the seat and there are no gaps for water to pass through.


Where to Find Excellent Tap Reseating Tools?


I recommend one manufacturer to you – that’s Maxclaw Tools Co., Ltd. The company specializes in kinds of tube tools, including tap reseating tools, tube cutting tools, tube bending tools, flaring tools, deburring tools, etc.


If you need more information about tap reseaters, please do not hesitate to check out their website. Find ideal tube tools at Maxclaw.



Article Source:

How to Disconnect a Galvanized Pipe Fitting

Contemporary plumbers use copper and CPVC pipes to plumb residential water lines, but it’s still common to find galvanized steel water pipes in older homes and outdoor water lines. Galvanized pipes come in diameters from 1/2 inch to 8 inches, with 2-inch and larger pipes normally reserved for industrial use. The threaded pipes connect with threaded fittings. When you need to remove a fitting, you sometimes have your work cut out for you.


Single-Port Fittings

The concept with single-port fittings is simple: tighten your wrench around a spigot or cap connected to a galvanized pipe, and turn it counterclockwise to remove it. The reality is seldom that simple, however, because you will usually find the fitting rusted in place. At the very least, you’ll have to hold the pipe steady with one pipe wrench while you turn the fitting with another. You will need muscle power, too – lots of it. Once you get the fitting to move, the rest is easy, but you sometimes need to augment your best efforts with spray lubricant to accomplish removal.


Two-Port Fittings

Disconnecting a fitting with two ports, like a coupling or elbow, presents a dilemma. The question becomes how to loosen the fitting from one pipe without tightening it onto the other. The answer is that, to loosen the fitting from one pipe, you must first cut it loose from the other. You can cut through galvanized pipe with a hacksaw, but the job goes much faster if you use a reciprocating saw with a metal-cutting blade. Don’t forget to turn the water off before you cut into the pipe, or you’ll be dealing with an uncontrollable spray. You risk a scalding if the water is hot.


Tees and Crosses

The procedure for removing multiple-port fittings like tees and crosses is similar to disconnecting double-port fittings. You must cut all the pipes connected to the fitting but one. Making two cuts on each pipe to remove a small section gives you the clearance you need to turn the fitting. If you plan to replace the fitting, you’ll also have to replace the cut pipes, and replacing one extra pipe isn’t much more work. Therefore, it’s usually more expedient to simply cut all the pipes rather than trying to unscrew the fitting, which is probably locked onto the threads anyway.


Disassembling a Pipe System

When you assemble a system of galvanized pipes, you begin at one end and screw on pipes and fittings in order until you reach the other end. Disassembling the system is the reverse procedure, but you need a free end from which to start. That means cutting through at least one pipe unless there is a union somewhere in the system that you can take apart. When disassembling a system of old pipes that they won’t reuse, plumbers usually don’t go to the trouble of unscrewing them. They simply cut them apart with a reciprocating saw.


By the way, when mentioned galvanized pipe fittings, you maybe think where I can find them? The pipe fittings manufacturer that I recommend you is Golden Highope.


Golden Highope Industrial Inc. Ltd. offers galvanized and malleable iron pipe fittings, their products are designed, manufactured and shipped in compliance with API, ASTM, JIS, DIN, DAN, SMS and many other international quality standards from the spectroscopic tested. MECH is a China well-known brand of galvanized / malleable pipe fittings, which divided into two different series, American standard and British standard.


Learn more specifications of galvanized pipe fittings, welcome to visit Golden Highope’s website: Feel free to send inquiry to them.



Article Source:

What Are The Different Types of Directional Control Valve?

In this article, I will list down the advantages and disadvantages of sliding spool and poppet valve.


Types of Directional Control Valves:

Sliding Spool, Poppet / Diagram, Rotary Spool, Rotary Disc, Slide.


Here, I only introduce Sliding Spool Valve and Poppet Valve. Let’s learn more information about them below:


Sliding Spool Valves


Sliding spool valves are the most common directional control valves used in transmission of pneumatic power to the actuator. They are available in various forms and sizes.




The main advantages of spool valves with seals are:


  1. Simple maintenance.
  2. Fully balanced spool design allowing air to be without creating spool movement.
  3. Relatively simple to attach controls.
  4. Stroke limiters can be used.
  5. Available in suitable forms.
  6. Connected to any port




The main disadvantages of spool valves with seals are:


  1. Larger body size.
  2. Higher wear rates.
  3. Require lubrication.
  4. Continuous leakage.
  5. Not suitable for high pressure applications.
  6. Slower response time.
  7. Require a better quality air.


Poppet Valves


Poppet valves come in a wide variety of forms and are the most useful valve in pneumatic services. It can be used as the pilot section of a solenoid controlled valve. Poppet valve construction varies in accordance with the valve function and flow requirements.




The main advantages of poppet valves are:


  1. Can operate with lubricant free air.
  2. Can operate with inferior quality air.
  3. Leak free.
  4. Low wear.
  5. High flow rates.
  6. Rapid response.




  1. Cannot be serviced.
  2. Not suited to reverse porting.
  3. Relatively high operating forces.
  4. Air loss during change over.


If you need more information about directional control valves, I recommend that you can visit the website of ASHUN.


Ashun Fluid Power Co., Ltd. is a well-known manufacturer of specializing in kinds of hydraulic valves and hydraulic cylinders. Learn more details about directional control valves, please feel free to check out Ashun’s product pages and send inquiry to them.



Article Source: