Author Archives: Camille F.

Why Choose A CNC High Precision Grinding Machine?

Posted on by

If you’re working on complex workpieces that normal centerless grinding machines can’t handle, CNC high precision grinding machines may be the best choice for your company.

 

CNC high precision grinding machines come in two types: cylindrical grinding machines and surface grinding machines. These devices perform a final, ultra-precise grinding stage that removes material to as little as 200 nm per pass. Also, at such rates of material removal (200nm/pass), there is only negligible heat generation – even without applying coolant. This makes it rare for the metallurgical characteristics of the workpiece to be affected.

 

In addition, CNC high precision grinding machines make it easy to machine components with intricate internal features. You won’t have to use several machines to carry out the external grinding and the internal grinding. One machine is enough to do both.

 

Also, due to the high precision of the machined parts, there’s a better consistency of what’s produced. Again, the entire grinding process is computer controlled with no human input that could lead to errors. Once the settings are made, every part is machined with exact dimensional accuracy.

 

CNC high precision grinding machines can be used on a wide variety of materials including steel, hardened aluminum, brass, plated aluminum, bronze, powdered metals, tungsten carbide, plastics, and titanium alloy. CNC high precision grinding machines are also the best choice for use in machining bearings, bushings, valves, shafts, pistons, sleeves, industrial nozzles, and industrial needles. These types of parts all require very high precision in both dimensional accuracy and surface finish.

 

If you need more information of high precision grinding machines, I recommend you to visit SIGMA CNC Technology Machinery Co., Ltd. – they are the professional manufacturer of specializing in grinding machines and machining centers. Now, check out their website and feel free to contact with SIGMA for more details!

 

Article Source: https://www.maxgrind.com/cnc-high-precision-grinding-machine/

New to Carton Closing Stapler? Here’s What You Need to Know to Get Started.

Posted on by

The following will help you identify the best carton closing stapler and carton closing staples to staple the tops and bottoms of boxes.

 

First, Let’s Talk Staplers.

 

Carton closing staplers for top and bottom box closure come in two styles.

 

  • “Stick” or “Strip” – good for low and medium volume carton closing stapling applications.
  • Coil Staples – good for medium and high volume carton stapling applications.

 

Like most staples, carton closing staples have three important measurements that make up the overall dimensions of the staple:

 

  • Crown Width: This is the wire along the top that connects the 2 legs. Common carton closing staple crown dimensions used to close the bottoms and tops of boxes include: 1-3/8” wide crown (or “A” crown) and 1-1/4” wide crown (or “C” crown).
  • Leg Length: The two wires that come down from each end of the crown wire make up the legs of the staple. Common carton closing staple leg lengths used to close the bottoms and tops of boxes include: 1/2”, 5/8”, 3/4”, 7/8”, and 1-1/2”.
  • Wire Dimensions: Fastener wire is either flat or round. Carton closing staples are made of flat wire that has two dimensions.  For example, the wire dimensions of the Bostitch SW74375/8 staple are .074” x .037”.  You will notice that these dimensions make up a portion of the nomenclature of the part number.

 

Tip! – The wider the crown and the thicker the staple wire, the more secure the fastener will be.

 

Which Stapler Is The Best Stapler For Your Particular Carton Closing Application?

 

The guidelines stand pretty true for most top and bottom box stapling applications using a box with standard “C” flute corrugated board.

 

  • Single wall corrugated: 1/2”, 5/8”, and 3/4” leg lengths
  • Double wall corrugated: 3/4” and 7/8” leg lengths
  • Triple wall corrugated: 7/8” and 1-1/2” leg lengths depending on the application

 

Where to Buy Carton Stapler?

About this question, I recommend you to visit Apach Industrial Co., Ltd. – they offer a wide range of top quality Carton Stapler products. When you need to securely close a box, corrugated container, carton or any commercial packaging for shipping, you can choice their Carton Closing Stapler product. A good Carton Stapler can ensure fast and secure lid closing well. Hope you would like Apach’s products.

 

Article Source: THE R.V. EVANS COMPANY

The Advantages of Non-Woven Bags

Posted on by

The downside’s of using plastic bags are well documented and widely known. These solid waste items and pollutants sit in landfills and waste sites as well as clogging drains and filling the oceans. Companies and individuals are, more than ever, inclined to go back to using the good old recyclable paper bag. But did you know that the recycling process of paper can only be implemented about 3 times? A lot of paper bags aren’t reusable either so the recycling process goes on and on. Ultimately the bags are still made by chopping down trees which threatens the planets future air quality.

 

Woven bags are reusable and recyclable but they are more labor intensive and it takes more energy to create them. This means that they’re not the most ecologically friendly bags available to you. Instead, opt for non woven bags. First manufactured in China, they’re made from spun bond non woven polypropylene (PP) cloth. The material looks and feels like cloth, but it doesn’t need to be woven – making it a more economically sound option. To follow are the main benefits of using this material:

 

  • 100% recyclable
  • Bio-degradable and can burn without toxic contaminants
  • No PVC coating or water used in manufacturing process
  • Greater durability means they are more reusable
  • Screen printing and heat transfer full color printing available
  • Competitive pricing
  • Lightweight
  • Strong
  • Packable or foldable
  • Liquid repellent
  • Washable
  • Air permeable

 

Non-woven bags are now being used by a variety of businesses: grocers, department stores, gifts shops, off licenses, promotional companies, and many more. Non woven carriers are the most environmentally friendly and the most versatile and practical bags in the market place today.

 

If you have requirements of non-woven bags, I recommend you to contact with May Sun Jieh Enterprise Co., Ltd. – they are the professional paper bags and non woven bags supplier in Taiwan. Now, check out their website and contact them for more details!

 

Article Source: https://www.paperbagco.co.uk/blog/the-advantages-of-non woven-bags

Power Factor Regulator: How Does It Work?

Posted on by

The power factor regulator combines comprehensive operations with user-friendly control settings. It uses numerical techniques to compute the phase difference between the fundamentals of current and voltage, enabling precise power factor measurement even in the presence of harmonics.

 

The power factor regulator is designed to optimize the control of reactive power compensation. Reactive power compensation is achieved by measuring continuously the reactive power of the system and then compensated by the switching of capacitor banks. The sensitivity setting optimizes the switching speed. With the built in intelligent automatic switching program, the power factor regulator further improves the switching efficiency by reducing the number of switching operations required to achieve the desired power factor.

 

Usage of the capacitor bank is evenly distributed by the intelligent switching algorithm. This ensures uniform ageing of the capacitors and the contactors used.

 

The four-quadrant operation feature allows the power factor regulator to operate correctly in the case of active power feed back to the mains where regenerative power sources are used.

 

Harmonic current in the system can be harmful to the capacitor bank. This power factor regulator is capable of measuring the total harmonic distortion (THD) in the system and produces an alarm if the THD level is higher than the pre-set value. Other alarms include under/over compensate alarm, under/over current alarm and under/over voltage alarm.

 

Current transformer (CT) polarity is important in determining the correct phase angle different between the current and voltage hence the power factor. This power factor regulator will automatically correct the CT polarity internally in the event that the

Polarity is reversed.

 

If you want to learn more information of power factor regulator, visit Yuhchang Electric Co., Ltd. that will be a great choice! They are the professional manufacturer of specializing in kinds of power capacitors. To buy ideal power factor regulators, welcome to check out their website and feel free to contact with Yuhchang for more details.

 

Article Source: www.itmikro.com.my

Which Pump Will Work With Your Portable Hydraulic System?

Posted on by

Portable hydraulic pumps are taking over more tasks that would otherwise require dangerous and strenuous human labour. These time and back-saving devices make significantly lighter work of a plethora of plant maintenance chores such as lifting equipment, tightening and loosening bolts, spreading flanges, and cutting corroded nuts. As powerful as these tools are, using the right pump is crucial to ensuring safety and efficiency on the job.

 

Because of the vast spectrum of capabilities and functions of portable hydraulic pumps, several factors should be taken into account when determining the appropriate power source. Hydraulic tool users can choose from three primary power sources: hand, electric, or air. Each method offers unique benefits relative to a wide range of situations.

 

Hand Pumps

A hydraulic hand-powered pump is usually the simplest and most economical type of pump to use. It is ideal for sporadic use of small or medium-sized hydraulic tools and is especially suitable for use in remote locations where other reliable power sources cannot be secured. In some potentially hazardous cases, a manually powered pump could be the only viable option as it does not require a source of power that could ignite.

 

Hand-operated pumps are available in sizes ranging from smaller single-speed devices weighing less than 5 kg to larger metal two-speed models weighing almost 45 kg. These pumps can come with oil capacities of up to eight litres and valving for either single or double-acting tools. The proper hand pump will meet requirements for system oil capacity, fluid compatibility, and valving type. Duty cycle is not a major issue because a hand pump is normally used for short one-time tasks.

 

The primary drawback with hand-powered pumps is its reliance on manual effort: its use is limited to the physical ability of its operator. Additionally, since one hand must be used to work the pump, the operator must sacrifice convenience and efficiency. Although hand-powered pumps are quite portable, they may not be operative in cramped locations, such as on ladders or catwalks, where operators may not be able to generate enough power. Further, these types of pumps require a flat surface for operating.

 

Electric Pumps

Electric pumps are the most common high-pressure pumps used after hand-powered pumps. Electric units come with versatile options of motor types, heat exchangers, valves and actuators, and operating voltages. The abundance of variations makes it challenging to choose the correct pump in this category.

 

While the major factors in selecting a pump are size, voltage, reservoir capacity, and valving, the additional aspects of electric motor and the necessary duty cycle are critical in choosing the best electric pump. Duty cycle is the time frame in which the pump will run at a particular percentage of full loads. Most high-pressure pumps are not suitable for higher duty cycles. Tasks that necessitate pressures over 5,000 psi for over an hour require pumps with coolers to regulate oil temperatures at a safe level of 65C (150F) or less. Electric motors are either induction or universal. The application determines the proper selection of either.

 

Induction motors operate for longer periods of time with greater durability. They perform at reduced noise levels, which is a significant benefit for jobs in restricted spaces. Induction motors are usually heavier, which explains why they are more commonly used in areas where a stationary, high-production pump is needed. An induction motor requires a highly stable electrical power source. A reduction in line voltage — even as small as 10 percent — could cause extensive damage to the motor. Using this kind of pump is not advisable for settings where electricity is sourced by a generator with an extension cord.

 

A universal motor pump may be ideal for situations that require the performance and speed of an electric pump and flexibility with portability and power sources. These motors are lighter than induction motors, provide more power in proportion to weight, and can function with less stable electrical power. If necessary, universal motors can run full torque on half of terminal rated voltage.

 

Air Pumps

Like a hand-powered pump, an air pump is relatively easy to use, portable and lightweight. Air pumps are available in many different sizes. They offer greater performance capabilities relative to hand-operated pumps. Another advantage is that they can be safely used in a location where an electrical current could be hazardous, provided that the pump is positioned at a sufficient distance from a compressor.

 

Reciprocating pumps are more popular than other air pumps, offering greater performance at lower cost. Usually, they are single-speed models that provide high flows at lower pressure since it can operate faster under diminished loads. However, a dual reciprocating air-powered pump is available for situations where high flow is necessary. With this design, the high-flow unit can stall at high pressure without an unloading valve.

 

A rotary air pump is ideal for higher performance needs. This type of pumps utilizes a rotary air motor which drives an ordinary hydraulic pump. However, rotary air pumps are typically noiser, heavier, and need more air than reciprocating pumps.

 

Sufficient air supply is the most critical factor to consider when choosing either air pump style. All air-powered pumps require a certain air flow rate to perform at their maximum level. If the airflow rate cannot be determined beforehand, a common standard is that each horsepower at the compressor will supply five scfm (approximately 142 litres).

 

Air pumps are suitable for operation in environments where pneumatic lines have been installed and are easily accessible. However, air pumps are typically more costly to use relative to electric pumps as compressed air tends to power tools less efficiently.

 

Guidelines for Pump Selection

 

  • Determine proper ratings for maximum operating pressure, oil capacity, flow rate, cycle frequency and duration, and valving.
  • Analyze cost factors including impact on productivity and manpower.
  • Research ergonomic and safety features. Weight, dimensions and portability must be considered to help determine the level of dexterity and strength the operator will need. Noise levels should be as low as possible.
  • Know the power source requirements. The power that is safely available often determines what pump is best to use.
  • Ensure that tool speed matches pump size needed. Power requirements increase exponentially with pump size. The ideal pump matches the necessary speed without superseding it.

 

If you need more information of portable hydraulic pump or other hydraulic pumps, I recommend you to visit YEOSHE Hydraulics Technology Co., Ltd. – they are the professional hydraulic pump and hydraulic unit supplier Taiwan. To get more details of hydraulic pumps, please do not hesitate to contact with YEOSHE.

 

Article Source: https://www.rg-group.com/blogs/which-pump-will-work-with-your-portable-hydraulic-system/

Burger Box Forming Machine: Win Shine Machinery Can Provide Various Paper Box Making Machines

Posted on by

When you go McDonald’s or Burger King, maybe you think of a question about why is it that some burgers are wrapped in paper while some are put in boxes?

 

That’s a great question!

 

A low cost burger, like a plain hamburger at McDonald’s or Burger King, is paper wrapped to keep the costs down. People don’t have high expectations of a one dollar burger, so it’s no big deal. They don’t have many components either, so there is little to upset if they get jostled around in the bag during travel.

 

A higher end burger, like a Big Mac, is boxed to prevent the burger from becoming disheveled by the customer. A higher priced product means higher guest expectations. If A Big Mac was paper wrapped and it got smashed by other foods in the bag, fewer people would buy them. The higher price of the burger includes the packaging.

 

When mentioned paper burger boxes, do you know how do these paper boxes make?

 

The fastest way is manufactured by paper box forming machine. You can come and visit the website of Win Shine Machinery. On their site, you can find kinds of food box machines, and also can watch video for much more details.

 

Below, I will show you the video of Win Shine’s burger box forming machine:

 

Hamburger Box Forming Machine

WS-8804

If you have interest in burger box forming machine or other food box making machines, welcome to check out Win Shine’s website and feel free to contact them for more details of paper box forming machines!

 

Win Shine Machinery Co., Ltd.

No.208, Sec. 1, Guofeng Rd., Shengang Dist., Taichung City, 42942,Taiwan

TEL: +886-4-2515-4999

FAX: +886-4-2525-0111

E-mail: winshine.taiwan1990@gmail.com

 

Article Source: Quora

Which RFID Reader Option Is Best For You?

Posted on by

For those of you, who are new to the world of RFID and rugged handheld computing, welcome. We hope this post serves as a guide to help you better understands which information collection option best suits the needs of your project. A common question often answered here at Juniper is, “Which RFID frequency should I use?” We want to make sure you’re getting the tools you need, without overpaying for features that won’t be useful in your situation. Because identification readers are used in so many different cases, it’s hard to identify a customer’s exact needs without speaking to them directly. However, we hope these questions serve as a starting point to launch you in the right direction and prepare you to ask the right questions when determining the best option for your project.

 

Do You Need The Ability To Read And Write Data Over A Distance Greater Than ~50 Cm?

  • Yes → UHF might be a better option, allowing you to transfer data over several meters, while HF can only transfer data up to about 50 cm. If you need the ability to read over an even larger distance, UHF long-range RFID would be the best option for you.

 

  • No → HF might be better for you because its range is shorter, making it more reliable.

 

Will Your RFID Tags Be Placed Near Liquids, Metals, Carbon Substances, Or Other Dielectric And Conducting Objects?

  • Yes → HF would most likely work better because it is less vulnerable to interferences from surroundings. However, there are some manufacturers that have designed UHF tags that will work in these environments as well.

 

  • No → HF and UHF would both work well.

 

Do You Need To Read More Than 20 RFID Tags At One Time?

  • Yes → UHF might be better for you since it can read up to 200 tags at a time, whereas HF can only read up to 20 tags at a time.

 

  • No → Both HF and UHF would work. However, if you are planning to narrow down on one tag at a time, HF would probably be better since UHF might pick up multiple readings.

 

Will Your Tags Be Located In An Area With A High Amount Of Electromagnetic Interference (EMI)? EMI Is Emitted By Motors, Robots On Assembly Lines, Conveyors With Nylon Belts, Etc.

  • Yes → HF would probably be best because it is less susceptible to inaccuracies due to EMI.

 

  • No → HF and UHF would both work.

 

Does Your Application Require Faster Data Transfer?

  • Yes → UHF would probably be better because it transfers data faster than HF.

 

  • No → HF and UHF would both work.

 

Are There Inhibiting UHF Restrictions In Your Geographic Location That Would Interfere With Your Use Of UHF RFID?

  • Yes → HF might be better because the same HF technology is accepted worldwide, whereas UHF restrictions vary according to region.

 

  • No → HF and UHF would both be fine.

 

We hope answering these questions provides you with the information necessary to feel a little more confident about frequency options. If you need more information of UHF reader, welcome to check out the website of Pongee Industries Co., Ltd. – they are the professional manufacturer of RFID readers. Learn more details, please do not hesitate to contact with Pongee!

 

Article Source: http://blog.junipersys.com/which-rfid-reader-option-is-best-for-you/

About BT Tool Holders: BT30, BT40, BT50

Posted on by

There are two types of tools in CNC machinery: tool holders and cutting tools. There are other items related to tool holders, such as collets, set screws, wrenches and other setup tools.

 

Tools for CNC machinery are manufactured by a variety of brands and come in few different standards.

 

BT standard for tool holders originated in Japan and is somehow similar to CAT tool holders.

 

As well as CAT tool holders, it has numerical designations that correspond to the size of the taper: BT-30, BT-35, BT-40, BT-45, and BT-50. The higher the number is, the bigger is the taper.

 

Like CAT Tooling, BT Tooling comes in a range of sizes designated as BT 30, BT 40, BT 50, etc. and uses the same NMTB body taper as CAT 40. BT tooling is symmetrical about the spindle axis, which CAT tooling is not. This gives BT tooling greater stability and balance at high speeds.

 

BT Tool Holders will accept both Imperial and metric sized tools. BT Tooling looks very similar and can easily be confused with CAT tooling.

 

The difference between CAT and BT is the flange style, thickness, and the thread for the pull stud is a different size. BT Tool Holders use Metric thread pull studs (retention knobs).

 

If to compare BT to CAT tool holders – they look very similar and can be easily confused, however, they has different flange system and its thickness is different too. Also, the retention knobs are different. Therefore BT and CAT tool holders are not interchangeable.

 

Though both standards use the same NMTB body taper. BT tool holders are symmetrical around the main spinning axis, while CAT tool holders are not. That makes BT tool holders better balanced and more stable at higher speeds.

 

BT tool holders along with CAT and HSK standards are among the most used in CNC machinery. They will accept both imperial and metric sized tools; however, BT tools come in metric sizes. They are durable and are best choice for very high speed machinery.

 

BT Tools: Overall Maintenance

To insure proper performance of your toolholders, overall cleanliness of toolholder, collet pocket, collet, and nut must be maintained. It’s important to remember that all these components are manufactured to perform within tolerances of ten-thousandths (.0001”) of an inch.

 

Any dirt, dust, oil, chips, or other contaminant left on the spindle, taper, flange, collet, collet pocket, or nut can cause poor T.I.R. (runout) leading to premature wear of cutting tool, toolholder, and spindle mouth.

 

We recommend a regular preventive maintenance program be implemented in your shop to protect your investment in cutting tools, toolholders, and collets, and reduce scrap.

 

BT Tools and Performance & Productivity

BT tools allow use of ATC (Automatic Tool Change) technology to maximize the speed and productivity of manufacturing.

 

BT tool holders perform work with high strains and pressures, so be sure to store them safely without any chance for the tool being damaged – as this may cause some misbalance that can be critical at high speeds and precise CNC machinery.

 

BT Tool Holders: Bottom Line

Depending on your particular machining tool needs, the wide array of BT Holders that are manufactured and sold can help your job to me more efficient.

 

If you need more information of BT tool holder or CAT tool holder, I recommend you to visit Shin-Yain Industrial Co., Ltd. – they are the professional manufacturer of tool holders. To get more details of these products, please do not hesitate to contact with SYIC.

 

 

Article Source: https://toolholderexchange.com/bt-tool-holders-bt30-bt40-bt50/

Vacuum Forming Plastic Process: The Economical Way for Manufacturing Plastic Parts

Posted on by

Vacuum forming is a very economical method for producing plastic parts. The vacuum forming plastic process can produce parts in various configurations in small and large quantities at a reasonable price. This process involves the controlled heating of plastic materials to a temperature where it is flexible enough to be altered by the shape of a mold with the help of vacuum. In this method, the heated plastic sheet is forced against the mold by the air pressure differential created by pulling a vacuum between the sheet and the mold.

 

Vacuum Forming Can Be Used For Projects Like:

  • Product packaging
  • Agricultural applications
  • Medical applications
  • Lift truck enclosures
  • Railcar interior trim parts and seating components
  • Engine covers for construction equipment
  • Fascias for outdoor kiosks and ATM applications

 

Vacuum forming has advantages over other plastic production methods.

 

Here Are Some Potential Advantages That Would Make Vacuum Forming A Good Choice For Your Plastic Part:

  • Large parts or multi-part uses
  • Moderate annual volumes
  • Tight tooling budget
  • Rapid product development

 

Materials Commonly Used In Vacuum Forming:

  • ABS
  • PC / ABS
  • HDPE
  • TPO
  • HIPS
  • PVC / Acrylic

If you need vacuum forming services, I sincerely recommend you to contact with Marathon Enterprise Co., Ltd. – they are Taiwan professional vacuum forming plastic packaging supplier. You can get services of providing PP sheets, LDPE sheets, transparent plastic sheet, PP food container, etc. To get more details, please do not hesitate to contact Marathon at +886-3-3590801.

 

Article Source: https://www.emcoplastics.com/vacuum-forming/

Victor Taichung Sees 70% of Orders for Customized Machine Tools

Posted on by

Taiwan-based machine maker Victor Taichung Machinery Works has coped with waning competitiveness in prices for the export markets by offering customized manufacturing services to create product differentiation, with around 70% of orders associated with customization, according to company chairman MH Huang.

 

Huang said that Taiwan machine tool makers used to see their quotes some 30-40% lower than those offered by their biggest competitors from Japan, but such a price competitiveness has been significantly undermined by the sharp depreciation of the Japanese yen. As a result, international customers have turned to Japan machine tool brands, directly squeezing the survival space for Taiwan makers.

 

Huang said that since 2013, Victor Taichung has maintained a customer value-creating application center, gathering the firm’s experienced sales staff and engineers to directly face customers and respond to their actual needs. This way, Victor Taichung can agilely adjust its product development strategies based on direct responses from customers, thus effectively boosting product values and customer loyalty through customized production services.

 

Huang stressed that Taiwan machine tool makers cannot compete well with China and Korea rivals in terms of production volume of low- to medium-tier models or with Japan makers in the market for high-end products. Accordingly, he indicated, it will be a major challenge for business transformation of Taiwan machine tool builders as to how they can work out differentiation to highlight corporate values and even develop the market for higher-end products.

 

If you have any interest in vertical machining centers and much more custom machine tools, come and visit Victor Taichung Machinery Works Co., Ltd. for more details!

 

Article Source: https://www.twmt.tw/victor-taichung-sees-70-of-orders-for-customized-machine-tools/