Daily Archives: September 22, 2017

How to Use a Tool and Cutter Grinder

Posted on by

Usage of Tool Grinding Machine

A tool and cutter grinder is used to sharpen the edges of tools that have gone dull. The tool grinding machine is not a toy and takes special care and training in order to operate correctly. The tool and cutter grinder is also a rather large machine found in machine shops. It is recommended to take your tools to a professional to grind and sharpen them. The following article will explain how a professional operates a tool grinding machine.

 

4 Steps to Correctly Use Tool and Cutter Grinder

Step 1 – Prime the Machine

It is always a good idea to turn the tool and cutter grinder on to warm it up. A cold grinder will create rough cuts while a warm or hot grinder disc will produce the best result. Allow the tool grinding machine to run for several minutes before taking tool to the grinding disc.

 

Step 2 – Safety Precautions

Just looking at the tool grinding machine suggests a medieval torture device. There is a lot of moving parts, guides and rails to worry about as well as the grinding disc itself. Always wear heavy work gloves when using the machine. You also need to wear safety goggles. The grinding disc is typically abrasive and made with diamonds. When grinder begins to sharpen the tool it can cause small fragments of the tool, the disc or sparks to fly toward your face. Getting any of these superheated fragments in your eye can be very dangerous.

 

Step 3 – Examine the Tool

Not all tools are made the same and it is important to examine the tool you are about to use the tool grinding machine on. You are looking for the angle of the tool, including which way the blade is curved, how the edges are cut and the contact points. This is incredibly important because to properly use the tool and cutter grinder you need to know what direction the tool needs to go. If you fail to do this, you can severely damage the tool you are trying to bring back to life.

 

Step 4 – Using the Tool Grinding Machine

Double check all of your safety areas and examine your clearance. The kind of tool you are using will determine what the settings need to be. For this information you should always consult the instruction manual that came with the machine you have access to. Not every tool grinding machine is the same when it comes to this. Turn the machine on and keep a safe distance from the grinding disc. Remember the curvature of the tool you are sharpening and place it against the grinding disc at the appropriate angle. A knife, for example, would be approximately 45 degrees. Use short movements and firm pressure until you are satisfied it is sharp.

 

Top Work manufactures cutter grinders and tool grinders, including universal tool grinder, CNC tool grinder and monaset tool grinder. They specialize in the grinder development to diversify our products and elevate the quality. Quality is an essential, inseparable part of every process at Top Work. For more information about tool grinding machine, welcome to check out Top Work’s website right away!

 

Article Source: http://www.doityourself.com/stry/how-to-use-a-tool-and-cutter-grinder

Tell You 5 Tips to Find the Right Bicycle Shoes

Posted on by

The right bicycle shoes will offer you comfort while unlocking your performance potential

 

There are many factors to consider when deciding for new bicycle shoes. In this article, I’m going to give you five tips about what to look out for when choosing the right bicycle shoes.

 

Step #1: Finding The Right Length

Bicycle shoes are not running shoes! In contrast to choosing a running or even walking shoe you do not need extra room in your bicycle shoes. There is no rolling motion of the foot in cycling. You can easily test if the length of your bicycle shoe is appropriate. Just take out the original insole of the shoe you are interested in buying and step on the insole.

 

The shoe’s length is ideal, if you have three to five millimeters from the front of your big toe to the upper end of the insole. Make sure that your heel is located right at the lower end of the insole when you carry out this test!

 

Step #2: Checking The Width

 

Now that you found the right length you should not compromise on the width! The front region of the foot is the widest part of the foot and very sensitive in cycling as this is where the transfer of power from foot to pedal happens. There should not be any unnecessary pressure or space on the sides of the foot.

 

Step #3: The Fastening System

 

Moreover, you should take a good look at your shoes fastening system. Buckles and Velcro should not exert any additional pressure. When fastening your shoe the top material of the bicycle shoe should never fold, otherwise this could apply extra pressure points onto your foot. The form of the shoe is likely to suit to your foot if the fastening system is in a middle position when closing the shoe.

 

Step #4: Heel Support

 

A good cycling shoe fit provides a secure anchor for your heel. It should never slip, nor there any extra pressure or pain while walking.

 

Ask a second person to help you to check if the shoe has a good hold for your heel. This person should press the closed shoe to the floor. Now you have to try to raise the heel. If you manage to raise the heel fully or partly out of the shoe, the shoe is not supporting your heel accurately.

 

Step #5: Your Personal Impression

 

Finally: Your bicycle shoes should feel completely comfortable. If you feel that the fit is not perfect ask your dealer if there are any alternative brands or fits that would suit your requirements. Apply the four steps as explained above again when trying other shoes.

 

BEV.INT’L CORP is the manufacturer of specializing in producing kinds of quality bicycle parts and accessories. Their products include bicycle shoes, frame, front forks, bar ends, saddles etc. If you are interested in learning more information about BEV’s bicycle shoes and so on bike accessories, welcome to check out their website and feel free to send inquiries to them.

 

 

Article Source: http://www.solestar.de/en/service/5-tips-on-how-to-find-the-right-cycling-shoe