Daily Archives: September 25, 2017

Before Buying an Air Impact Wrench What You Should Know

Posted on by

Have there ever been times and instances where you or your family member had to build, construct, or even repair something around your home or office, or even do some work on your car, but you just did not have the right and appropriate tools to get the job done? Do you still use a normal, manual winding wrench to loosen or tighten those loose nuts and bolts?

 

With the power and science of modern technology nowadays, you, your family members, or even your fellow work-mates need not trouble yourselves with the manual and tedious labor of winding wrenches, for there is the air impact wrench! The air impact wrench is also known as an air wrench, air gun, torque gun, or windy gun.

 

This automated power tool brings high torque productivity while applying the least amount of effort by the user. This is done by accumulating energy in a rotating collection, then abruptly and rapidly distributing to the output shaft.

 

There are some points to consider however, when using, and more importantly, buying an air impact wrench. Probably the most touched upon issue and concern when purchasing an air wrench is whether or not the impact wrench you are getting, is the not only suitable to your specific needs, but also for the optimal output of the tool in general.

 

The best and most effective way to get the best impact wrench possible is by checking the brands and models of these wrenches.

 

Some other concerns and matters to consider before buying air impact wrenches are:

 

  • Checking how much torque the air wrench contains
  • The manufacturing and design of the wrench
  • Accumulated and total weight of the wrench itself
  • Air compressor size
  • Size drive of the air wrench
  • Budget to purchase the actual wrench

 

These points, though seemingly common and surely considered before purchasing the actual air wrench by the prospective consumers, are some of the most essential issues which are overlooked by the buyers themselves. Taking these points into consideration when looking to buy an air wrench will help you to make the right choice.

 

Buying the best wrench for your needs will undoubtedly save you not only time, or money, but ultimately you will have the satisfaction of having purchased the best tool out there for you. Be sure to keep these tips in mind, and you will definitely and certainly become the proud owner of an air impact wrench that will get the job done.

 

Reliable air impact wrench manufacturer, APACH Industrial Co., Ltd., providing kinds of industrial nailer and wrench for clients. If you have any interest, welcome to visit their website to obtain further details about high quality tools.

 

 

 

Article Source: http://EzineArticles.com/7037971

How to Use a Double Flaring Tool

Posted on by

One of the specialty tools that everybody who does his own auto repair should own is a double flaring tool. With this tool it’s possible to do a professional looking job with brake line or transmission cooling line replacement. Without this tool this is a very difficult job because it’s almost impossible to find the correct length steel line. A double flare is the best sealing and strongest way to flare a tubing end.

Double Flaring Tool FT-10A

Double Flaring Tool FT-10A

 

  1. Use a tubing cutter and cut the tubing to the desired length. Remove any burrs on the cut end of the tube. Slide the tubing nut on the tube, hex end first.

 

  1. Loosen the wing nuts and insert the tube in the appropriate opening of the tubing clamp. Place the correct sized adapter upside down beside the protruding end of the tube. Allow the end of the tubing to protrude from the tube to match the thickness of the large part of the adapter. Tighten the wing nuts tightly. Keep the halves of the tool parallel to each other as you tighten.

 

  1. Turn the adapter over, coat with a small amount of brake fluid and insert into the tube.

 

  1. Place the flaring tool on the tubing clamp, making sure the screw point is centered on the adapter and the flaring tool is locked on the tubing clamp. Turn the screw clockwise until the adapter bottoms out of the tubing clamp. Final tightening is easier if you clamp the tool in a vise if you have one.

 

  1. Loosen the screw and remove the adapter. The tubing end should have a bubble look at this point.

 

  1. Position the flaring tool with the point entering the tubing end and centered. Turn the screw clockwise and tighten until the cone is bottomed out completely.

 

  1. Remove the flaring tool and inspect the tubing end. The flare should be even all around with no cracks or gaps. Remove the tubing from the clamp.

 

Warning!!!

 

Always carefully check the new flare for cracks. Do not use if any cracks are found.

 

MAXCLAW Tools Co., Ltd. is the double flaring tool manufacturing expert in Taiwan. They provide a variety of hand tools including tubing cutter, tubing bender, hook spanner wrench, deburring tool, PEX crimping tool and more. If you want to get more information about flaring tools or others, welcome to visit MAXCLAW’s website and feel free to send inquiries or contact them directly!

 

 

Article Source: https://itstillruns.com/use-double-flaring-tool-5002780.html